NEC Projector PA622U User Manual

38
3. Convenient Features
To disable the SECURITY function:
1. Press the MENU button.
	 The	menu	will	be	displayed.
2. 		Select	[SETUP]	→	[CONTROL]	→	[SECURITY]	and	press	the	ENTER	button.
	 The	OFF/ON	menu	will	be	displayed.
3.	 Select	[OFF]	and	press	the	ENTER	button.
	 The	SECURITY	KEYWORD	screen	will	be	displayed.
4. Type in your keyword and press the ENTER button.
	 When	the	correct	keyword	is	entered,	the	SECURITY	function	will	be	disabled.
NOTE:	 If	you	 forget	 your	keyword,	 contact	your	dealer....

39
3. Convenient Features
❽ Projecting 3D videos
This	projector	 can	be	used	 to	watch	 videos	 in	3D	 using	 commercially-available	 active	shutter-type	 3D	eyewear. 	In	
order	 to	synchronize	 the	3D	video	 and	eyewear,	 a	commercially-available	 3D	emitter	 needs	to	be	 connected	 to	the	
projector	(on	the	projector	side).
The	3D	eyewear	receives	information	from	the	3D	emitter	and	performs	opening	and	closing	on	the	left	and	right.
 CAUTION
Health precautions
Before	 use,	please	 make	sure	to	read...

40
3. Convenient Features
	 The	[3D	SETTINGS]	screen	will	be	displayed.
(2)	Press	the	▼	button	to	align	the	cursor	with	the	[FORMAT]	and	press	the	ENTER	button.
	 The	format	screen	will	be	displayed.
(3)	Select	the	input	signal	format	using	the	▼	button	and	then	press	the	ENTER	button.
 
	 The	3D	settings	screen	will	disappear	and	the	3D	video	will	be	projected.	
	 Press	the	MENU	button	and	the	on-screen	menu	will	disappear.
	 The	3D	caution	 message	 screen	will	be	displayed	 when	switching	 to	a	3D...

41
3. Convenient Features
When videos cannot be viewed in 3D
Please	check	the	following	points	when	videos	cannot	be	viewed	in	3D.
Please	also	read	the	operating	manual	attached	to	the	3D	eyewear.
Possible reasonsSolutions
The selected signal does not support 3D output�Please change the video signal input to one that supports 3D�
The format for the selected signal is turned to [OFF(2D)]�Please change the format in the on-screen menu to [AUTO] or a format that supports 3D�
A eyewear that is not supported...

42
3. Convenient Features
❾ Controlling the Projector by Using an HTTP Browser
Overview
The	HTTP	Server	function	provides	settings	and	operations	for:
1.	 Setting	for	wired	network	(NETWORK	SETTINGS)
	 To	use	wired	 LAN	connection,	 connect	the	projector	 to	the	 computer	 with	a	commercially	 available	LAN	cable. 	(→ 
page	137)
2.  Setting Alert Mail (ALERT MAIL)
	 When	the	projector	is	connected	to	a	wired	network,	lamp	replace	time	or	error	messages	will	be	sent	via	e-mail.
3.  Operating the...

43
3. Convenient Features
Handling of the Address for Operation via a Browser
Regarding	the	actual	 address	 that	is	entered	 for	the	 address	 or	entered	 to	the	 URL	 column	 when	operation	 of	the	 pro-
jector	 is	via	 a	browser,	 the	host	 name	 can	be	used	 as	it	is	 when	 the	host	 name	 corresponding	 to	the	 IP	address	 of	the	
projector	 has	been	 registered	 to	the	 domain	 name	server	 by	a	network	 administrator,	 or	the	 host	 name	 corresponding	
to	the	IP	address	of	the	projector	has	been...

44
3. Convenient Features
PICTURE:	Controls	the	video	adjustment	of	the	projector.
BRIGHTNESS ▲ ����Increases the brightness adjustment value�
BRIGHTNESS ▼ ����Decreases the brightness adjustment value�
CONTRAST ▲ ��������Increases the contrast adjustment value�
CONTRAST ▼ ��������Decreases the contrast adjustment value�
COLOR ▲  ��������������Increases the color adjustment value�
COLOR ▼ ��������������Decreases the color adjustment value�
HUE ▲ �������������������Increases the hue adjustment value�
HUE...

45
3. Convenient Features
NETWORK SETTINGS
•	SETTINGS
WIRED
SETTINGSet	for	wired	LAN.
APPLYApply	your	settings	to	wired	LAN.
PROFILE	1/PROFILE	2Two	settings	can	be	set	for	wired	LAN	connection.	Select	PROFILE	1	or	PROFILE	2.	
DISABLETurn	off	wired	LAN	connection
DHCP	ONAutomatically	assign	IP	address,	 subnet	mask,	and	gateway	 to	the	 projector	 from	your	
DHCP	server.
DHCP	OFFSet	IP	address,	 subnet	mask,	and	gateway	 to	the	 projector	 assigned	 by	your	 network	
administrator.
IP	ADDRESSSet	your	IP...

46
3. Convenient Features
•	NAME
PROJECTOR	NAMEEnter	a	name	 for	your	 projector	 so	that	 your	 computer	 can	identify	 the	projector. 	A	
projector	name	must	be	16	characters	or	less. 	
TIP:	Projector	name	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
HOST	NAMEEnter	 the	hostname	 of	the	 network	 connected	 to	the	 projector. 	A	 host	 name	 must	be	
15	or	less.
DOMAIN	NAMEEnter	 the	domain	 name	of	the	 network	 connected	 to	the	 projector. 	A	 domain	 name	
must	be	60	characters	or...

47
3. Convenient Features
•	NETWORK	SERVICE
PJLink	PASSWORDSet	a	password	 for	PJLink*. 	A	 password	 must	be	32	characters	 or	less. 	Do	 not	 forget	
your	password. 	However,	if	you	forget	your	password,	consult	with	your	dealer.
HTTP	PASSWORDSet	a	password	for	HTTP	server. 	A	password	must	be	10	characters	or	less.
When	a	password	 is	set	 up,	 you	 will	be	prompted	 for	your	 user	 name	 (arbitrary)	 and	
password	during	LOGON.
AMX	BEACONTurn	on 	or 	off 	for 	detection 	from 	AMX 	Device 	Discovery...