NEC Projector P502HL User Manual
Here you can view all the pages of manual NEC Projector P502HL User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
48
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio” ref ers to the r atio of width to height of a projected image .
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.
ResolutionAspect RatioVGA640 × 4804:3
SVGA800 × 6004:3
XGA1024 × 7684:3
WXGA1280 × 76815:9
WXGA1280 × 80016:10
WXGA+1440 × 90016:10
SXGA1280 × 10245:4
SXGA+1400 × 10504:3
UXGA1600 ×...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-60.png "Page 61
48
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio” ref ers to the r atio of width to height of a projected image .
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.
ResolutionAspect RatioVGA640 × 4804:3
SVGA800 × 6004:3
XGA1024 × 7684:3
WXGA1280 × 76815:9
WXGA1280 × 80016:10
WXGA+1440 × 90016:10
SXGA1280 × 10245:4
SXGA+1400 × 10504:3
UXGA1600 ×...")
48 Selecting Aspect Ratio [ASPECT RATIO] The term “aspect ratio” ref ers to the r atio of width to height of a projected image . The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. • This table shows typical resolutions and aspect ratios that most computers support. ResolutionAspect RatioVGA640 × 4804:3 SVGA800 × 6004:3 XGA1024 × 7684:3 WXGA1280 × 76815:9 WXGA1280 × 80016:10 WXGA+1440 × 90016:10 SXGA1280 × 10245:4 SXGA+1400 × 10504:3 UXGA1600 ×...
Page 62
![Page 62
49
Sample image when the appropriate aspect ratio is automatically determined
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-cally determined
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the aspect ratio is automatically determined
NOTE: To display a letterbox signal prop-
erly, select [LETTERBOX].
NOTE: To display a squeezed signal prop-
erly, select [16:9].
TIP:
• The term...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-61.png "Page 62
49
Sample image when the appropriate aspect ratio is automatically determined
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-cally determined
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the aspect ratio is automatically determined
NOTE: To display a letterbox signal prop-
erly, select [LETTERBOX].
NOTE: To display a squeezed signal prop-
erly, select [16:9].
TIP:
• The term...")
49 Sample image when the appropriate aspect ratio is automatically determined [Computer signal] Aspect ratio of incoming signal4:35:416:9 15:916:10 Sample image when the appro-priate aspect ratio is automati-cally determined [Video signal] Aspect ratio of incoming signal4:3 Letterbox Squeeze Sample image when the aspect ratio is automatically determined NOTE: To display a letterbox signal prop- erly, select [LETTERBOX]. NOTE: To display a squeezed signal prop- erly, select [16:9]. TIP: • The term...
Page 63
![Page 63
50
❺ Menu Descriptions & Functions [SETUP]
[GENERAL]
Correcting Keystone Distortion Manually [KEYSTONE]
You can correct horizontal or ver tical ke ystone manually . [HORIZONTAL] and [VERTICAL] (simultaneously adjustable)
correction can be selected.
NOTE:
• Some items are not available when one item is activated. Unavailable items are shown in grey.
• To change from one item to another item, reset the first item.
• Adjustment values will be overwritten. They will not be deleted even when the projector...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-62.png "Page 63
50
❺ Menu Descriptions & Functions [SETUP]
[GENERAL]
Correcting Keystone Distortion Manually [KEYSTONE]
You can correct horizontal or ver tical ke ystone manually . [HORIZONTAL] and [VERTICAL] (simultaneously adjustable)
correction can be selected.
NOTE:
• Some items are not available when one item is activated. Unavailable items are shown in grey.
• To change from one item to another item, reset the first item.
• Adjustment values will be overwritten. They will not be deleted even when the projector...")
50 ❺ Menu Descriptions & Functions [SETUP] [GENERAL] Correcting Keystone Distortion Manually [KEYSTONE] You can correct horizontal or ver tical ke ystone manually . [HORIZONTAL] and [VERTICAL] (simultaneously adjustable) correction can be selected. NOTE: • Some items are not available when one item is activated. Unavailable items are shown in grey. • To change from one item to another item, reset the first item. • Adjustment values will be overwritten. They will not be deleted even when the projector...
Page 64
![Page 64
51
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
[LIGHT MODE]
Adjusting the energy savings settings and the brightness of each projector in multi-screen projection. For energy sav-
ings settings, see page 28 “4 Changing Eco Mode/Checking Energy-Sa ving Eff ect”.
ECO MODEOFFThe light module luminance (brightness) will be at the setup brightness for [ADJUST].
ECO1By controlling the brightness and...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-63.png "Page 64
51
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
[LIGHT MODE]
Adjusting the energy savings settings and the brightness of each projector in multi-screen projection. For energy sav-
ings settings, see page 28 “4 Changing Eco Mode/Checking Energy-Sa ving Eff ect”.
ECO MODEOFFThe light module luminance (brightness) will be at the setup brightness for [ADJUST].
ECO1By controlling the brightness and...")
51 Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. [LIGHT MODE] Adjusting the energy savings settings and the brightness of each projector in multi-screen projection. For energy sav- ings settings, see page 28 “4 Changing Eco Mode/Checking Energy-Sa ving Eff ect”. ECO MODEOFFThe light module luminance (brightness) will be at the setup brightness for [ADJUST]. ECO1By controlling the brightness and...
Page 65
![Page 65
52
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video
or S-Video.
OFF ������������������������This exits the closed caption mode�
CAPTION 1-4 ���������Text is superimposed�
TEXT 1-4 ����������������Text is displayed�
NOTE:
• The closed caption is not available under the following conditions:
- when messages or menus are displayed.
- when an image is magnified, frozen, or muted.
• Portions of...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-64.png "Page 65
52
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video
or S-Video.
OFF ������������������������This exits the closed caption mode�
CAPTION 1-4 ���������Text is superimposed�
TEXT 1-4 ����������������Text is displayed�
NOTE:
• The closed caption is not available under the following conditions:
- when messages or menus are displayed.
- when an image is magnified, frozen, or muted.
• Portions of...")
52 Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video. OFF ������������������������This exits the closed caption mode� CAPTION 1-4 ���������Text is superimposed� TEXT 1-4 ����������������Text is displayed� NOTE: • The closed caption is not available under the following conditions: - when messages or menus are displayed. - when an image is magnified, frozen, or muted. • Portions of...
Page 66
![Page 66
53
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as HDMI1, HDMI2, COMPUTER, VIDEO, HDBaseT, APPS, to be
displayed on the top right of the screen.
When no input signal is present, the no-signal guidance prompting you to check for an av ailable input will be display ed at
the center of the screen. When the [APPS] item is selected for...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-65.png "Page 66
53
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as HDMI1, HDMI2, COMPUTER, VIDEO, HDBaseT, APPS, to be
displayed on the top right of the screen.
When no input signal is present, the no-signal guidance prompting you to check for an av ailable input will be display ed at
the center of the screen. When the [APPS] item is selected for...")
53 [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as HDMI1, HDMI2, COMPUTER, VIDEO, HDBaseT, APPS, to be displayed on the top right of the screen. When no input signal is present, the no-signal guidance prompting you to check for an av ailable input will be display ed at the center of the screen. When the [APPS] item is selected for...
Page 67
![Page 67
54
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
AUTO
When the light module is turned ON, the inner sensor of the projector detects its installation state either DESK
FRONT or CEILING FRONT and then switch its projection method
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Disabling the Cabinet Buttons...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-66.png "Page 67
54
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
AUTO
When the light module is turned ON, the inner sensor of the projector detects its installation state either DESK
FRONT or CEILING FRONT and then switch its projection method
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Disabling the Cabinet Buttons...")
54 [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. AUTO When the light module is turned ON, the inner sensor of the projector detects its installation state either DESK FRONT or CEILING FRONT and then switch its projection method DESKTOP FRONTCEILING REAR DESKTOP REARCEILING FRONT Disabling the Cabinet Buttons...
Page 68
![Page 68
55
Enabling Security [SECURITY]
This feature turns on or off the SECURITY function.
Unless the correct keyword is entered, the projector cannot project an image. (→ page 30)
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The
default is 38400 bps. Select the appropriate baud rate for your equipment to be...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-67.png "Page 68
55
Enabling Security [SECURITY]
This feature turns on or off the SECURITY function.
Unless the correct keyword is entered, the projector cannot project an image. (→ page 30)
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The
default is 38400 bps. Select the appropriate baud rate for your equipment to be...")
55 Enabling Security [SECURITY] This feature turns on or off the SECURITY function. Unless the correct keyword is entered, the projector cannot project an image. (→ page 30) NOTE: Your setting will not be affected even when [RESET] is done from the menu. Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be...
Page 69
![Page 69
56
Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the single remote control that has the CONTROL
ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together
using the single remote control. To do so, y ou ha ve to assign an ID n umber to each projector .
CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector�
CONTROL ID...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-68.png "Page 69
56
Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the single remote control that has the CONTROL
ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together
using the single remote control. To do so, y ou ha ve to assign an ID n umber to each projector .
CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector�
CONTROL ID...")
56 Setting ID to the Projector [CONTROL ID] You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote control. To do so, y ou ha ve to assign an ID n umber to each projector . CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector� CONTROL ID...
Page 70
![Page 70
57
Using Test Pattern [TEST P ATTERN]
Displays the test pattern for adjusting distortion on the screen and the focus at the time of the projector setup. Once
the [TEST PATTERN] on the onscreen menu is selected, the pattern for adjustment will be display ed on. If you find
distortion on the pattern, adjust the projector installation angle or correct distortion by pressing the KEYSTONE button
on the remote. If the focus adjustment is required, control the focus lever. Press EXIT button to close the test...](http://img.usermanuals.tech/thumb/54/100054/w300_projector_manual_8938_d-69.png "Page 70
57
Using Test Pattern [TEST P ATTERN]
Displays the test pattern for adjusting distortion on the screen and the focus at the time of the projector setup. Once
the [TEST PATTERN] on the onscreen menu is selected, the pattern for adjustment will be display ed on. If you find
distortion on the pattern, adjust the projector installation angle or correct distortion by pressing the KEYSTONE button
on the remote. If the focus adjustment is required, control the focus lever. Press EXIT button to close the test...")
57 Using Test Pattern [TEST P ATTERN] Displays the test pattern for adjusting distortion on the screen and the focus at the time of the projector setup. Once the [TEST PATTERN] on the onscreen menu is selected, the pattern for adjustment will be display ed on. If you find distortion on the pattern, adjust the projector installation angle or correct distortion by pressing the KEYSTONE button on the remote. If the focus adjustment is required, control the focus lever. Press EXIT button to close the test...