Home > NEC > Television > NEC Plasmasync 61mp1 Users Manual

NEC Plasmasync 61mp1 Users Manual

Here you can view all the pages of manual NEC Plasmasync 61mp1 Users Manual. The NEC manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 51

E-46
22. Audio Select Set
Function
The external control equipment sets combinations of audio and video inputs
for the plasma monitor.
Transmission Data
DFH 80H 60H 70H 02HDATA00 DATA01CKS
DATA00: AUDIO INPUT
01H: AUDIO 1
02H: AUDIO 2
03H: AUDIO 3
DATA01: VISUAL INPUT
01H: Video 1
02H: Video 2
03H: Video 3
05H: HD (HD1 or DTV or DTV1)
06H: HD2 (DTV2)
07H: RGB 1/ PC 1
08H: RGB 2/ PC 2
0CH: RGB 3/ PC 3
ACK
The plasma monitor returns the following ACK when the input is switched.
3FH 60H 80H 70H 00H CKS
* The...

Page 52

E-47
Table of Signals Supported
Supported resolution
•When the screen mode is NORMAL, each signal is converted to a 1024 dots768 lines signal. (Except for *2, 3, 4)
•When the screen mode is TRUE, the picture is displayed in the original resolution.
•When the screen mode is FULL, each signal is converted to a 1364 dots768 lines signal. (Except for *
3)
Computer input signals supported by this system
  Screen modeDots  lines
640400
640480
848480
852480*
1
800600
1024768
1152864
1280768
1360765...

Page 53

E-48
*1 Only when using a graphic accelerator board that is capable of displaying 852480.
*2 This signal is converted to a 1228 dots  768 lines signal.
*3 The picture is displayed in the original resolution.
*4 The aspect ratio is 5:4. This signal is converted to a 960 dot768 line signal.
*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the
RGB mode prepared for the input signals listed in the table above.
*6 To connect the...

Page 54

E-49
Symptom
Picture is disturbed.
Sound is noisy.
Remote control operates erroneously.
The remote control does not work.
Monitor’s power does not turn on
when the remote control’s power
button is pressed.
Monitor does not operate when the
remote control’s buttons are pressed.
No sound or picture is produced.
Picture appears but no sound is
produced.
Poor picture with VIDEO signal input.
Poor picture with RGB signal input.
Tint is poor or colors are weak.
Nothing appears on screen.
Part of picture is cut...

Page 55

E-50
Specifications
Product NamePlasmaSync 61MP1 Plasma Monitor
Product CodePX- 61XM1G
Screen Size53.2(H)29.9(V) inches
1351(H)760(V) mm
diagonal 61
Aspect Ratio16 : 9
Resolution1365(H)768(V) pixels
Pixel Pitch0.039(H)0.039(V) inches
0.987(H)0.987(V) mm
Color Reproduction256 levels, 16,770,000 colors
Signals
Synchronization RangeHorizontal : 15.5 to 93.8 kHz
(automatic : step scan)
Vertical : 50.0 to 120 Hz
(automatic : step scan)
Input SignalsRGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*1...

Page 56

PlasmaSync 61MP1  Users Manual
Printed in Japan
7S800271
Printed on recycled paper
PlasmaSync Plasma Monitor
Users Manual
Bedienungshandbuch
Manuel de lutilisateur
Manual del Usuario
Manuale duso
Bruksanvisning
 
Start reading NEC Plasmasync 61mp1 Users Manual

Related Manuals for NEC Plasmasync 61mp1 Users Manual

All NEC manuals