NEC Plasmasync 61mp1 Users Manual

E-26
Information
 Adjusting the Auto Picture
ON ...................The Picture ADJ and Fine Picture
adjustments are made automatically.
OFF .................The Picture ADJ and Fine Picture
adjustments are made manually.
 Adjusting the position of the image
V-POSITION ...Adjusts the vertical position of the
image.
H-POSITION... Adjusts the horizontal position of the
image.
V-HEIGHT .......Adjusts the vertical size of the image.
(Except for STADIUM mode)
H-WIDTH ......... Adjusts the horizontal size of...

E-27
Adjusting the position of the menu display
Use these operations to adjust the position of the menus
that appear on the screen.
Example: Adjusting the position of the menu display
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”,
then press the PROCEED button.
The “FUNCTION” menu appears.
2. Use the 
 and  buttons to select “OSM ADJ.”
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:...

E-28
Setting the power management for computer images
This energy-saving (power management) function
automatically reduces the monitor’s power consumption
if no operation is performed for a certain amount of time.
Example: Turning the power management function on
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select...

E-29
POWER/STANDBY indicator
Power management
mode
On
Standby
Suspend
Off
POWER/STANDBY
indicator
Green
Orange
Red
Red Description
Horizontal and vertical synchronizing
signals are present from the computer.
No horizontal synchronizing signals
are sent from the computer.
No vertical synchronizing signals are
sent from the computer.
No horizontal or vertical synchronizing
signals are sent from the computer.
Turning the picture back on
Picture already on.
Operate the keyboard or mouse. The
picture...

E-30
Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the
screen on which nothing is displayed when the screen is
set to the 4:3 size.
Example: Adjusting the “GRAY LEVEL”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “GRAY LEVEL”.
FUNCTION
OSM
OSM...

E-31
Setting RGB3 ADJ.
When the picture input from the RGB3 input terminal is
distorted, select the most appropriate setting from among
“1”, “2”, and “3”.
Example: Setting “2”
Press the PROCEED button on the remote control to
display MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”,
then press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “RGB3 ADJ.”.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:...

E-32
Information
 PLE
AUTO ..............The brightness of the screen is
adjusted automatically to suit the
picture quality.
LOCK ..............The brightness level is set to
minimum.
 ORBITER
ON ...................The picture moves around the screen
intermittently.
OFF .................Orbiter mode does not function.
 INVERSE
ON..................... The picture is displayed alternately
between positive image and negative
image.
OFF .................Inverse mode does not function.
WT...

E-33
Option Settings Menu
Setting the allocation of the audio connectors
Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting “AUDIO 1” to “VIDEO 2”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “OPTION”, then
press the PROCEED button.
The “OPTION” screen appears.
2. Use the 
 and  buttons to select “AUDIO 1”.
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT...

E-34
Information
 BNC SELECT
RGB ................ Uses the 5BNC terminal for RGB
input.
COMP. .............Use the 3BNC terminal for component
input.
SCART ............Use the 4BNC terminal for RGB with
composite sync input. See page E-8.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a...

E-35
Information
 RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO ..............Select the suitable mode for the
specifications of input signals as
listed in the table “Computer input
signals supported by this system” on
page E-47.
STILL ..............To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION ..........The video signal (from a scan
converter) will be converted to RGB
signals to make the...