NEC Plasmasync 61mp1 Users Manual

E-16
Showing a couple of pictures on the
screen at the same time
* An RGB-input picture may not be displayed in these modes,
depending on the input signal specifications.
1. Press the MULTI button to select a screen mode from
among single mode, side by side, and picture in picture.
Side by side 1
VIDEO1RGB/PC1
AB
Press the cursor buttons 
  on the remote control to
switch either side by side 1 (with 
) or side by side 2
(with 

).
Note:
Picture A and B on the above screen are not always of the
same...

E-17
Menu Operations
The OSM window is displayed with respect to the
screen as shown on the diagram.
* Depending on the screen’s mode, the OSM may be
displayed differently.
In the explanation, the OSM section is shown close up.
MAIN MENU
PICTURE
SOUND
SCREEN
FUNCTION
OPTIONS
INFORMATION
SEL. OK EXITEXITPROCEED
The following describes how to use the menus and the
selected items.
1. Press the PROCEED button on the remote control to
display the MAIN MENU.
MAIN MENU
PICTURE
SOUND
SCREEN
FUNCTION
OPTIONS...

E-18
Main menu Sub menu Functions Default Reset
PICTURE CONTRAST Adjusts the contrast. Center Yes
BRIGHTNESS Adjusts the brightness. Center Yes
SHARPNESS Adjusts the sharpness. Center Yes
COLOR Adjusts the color. Center Yes
TINT Adjusts the tint. Center Yes
PICTURE MODE Sets the picture mode according to the VIDEO environment and MEMORY Yes
image software.
COLOR TEMP Adjusts the color temperature and white balance. 2*
1Ye s
NR Reduces noise visible in image. OFF Yes
Main menu Sub menu Functions Default...

E-19
Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “PICTURE”, then
press the PROCEED button. The “PICTURE” screen
appears.
2. Use the 
 and  buttons to select “CONTRAST”.
PICTURE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NRMEMORY
2
OFF :
:
:...

E-20
Setting the picture mode according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the “THEATER” mode
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “PICTURE”, then
press the PROCEED button.
The “PICTURE” screen appears.
2. Use the 
 and  buttons to select “PICTURE MODE”.
PICTURE
CONTRAST...

E-21
Setting the color temperature
Use this procedure to set color tone produced by the plasma
display.
Example: Setting “1”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “PICTURE”, then
press the PROCEED button.
The “PICTURE” screen appears.
2. Use the 
 and  buttons to select “COLOR TEMP.”.
PICTURE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NRMEMORY
2
OFF :
:
:
RG
SEL.ADJ. RETURNEXIT
3. Use the...

E-22
Adjusting the color to the desired quality
Use this procedure to adjust the white balance for bright
pictures and dark pictures to achieve the desired color
quality.
Example: Adjusting  the “WHITE BALANCE”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “PICTURE”, then
press the PROCEED button.
The “PICTURE” screen appears.
2. Use the 
 and  buttons to select “COLOR TEMP.”.
PICTURE
CONTRAST
BRIGHTNESS
SHARPNESS...

E-23
Reducing noise in the picture
Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.
Example: Setting “NR-3”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “PICTURE”, then
press the PROCEED button.
The “PICTURE” screen appears.
2. Use the 
 and  buttons to select “NR”.
PICTURE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR...

E-24
Sound Settings Menu
Adjusting the treble, bass and left/right
balance
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “SOUND”, then
press the PROCEED button.
The “SOUND” screen appears.
2.To adjust the bass ...
Use the 
 and  buttons to select “BASS”.
SOUND
BASS
TREBLE
BALANCE
LR
SEL.ADJ. RETURNEXIT
3. Adjust the...

E-25
3. Adjust using the 
 and  buttons.
V–POSITION
* If neither the 
 or  button is pressed within 5 seconds,
the current setting is set and the previous screen
reappears.
To continue making other computer image
adjustments ...
Repeat from step 2.
4.Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 When “AUTO PICTURE” is “OFF”
SCREEN
MODE
V–POSITION
H–POSITION
V–HEIGHT
H–WIDTH
AUTO PICTURE...