NEC Plasmasync 61mp1 Users Manual
Have a look at the manual NEC Plasmasync 61mp1 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-16 Showing a couple of pictures on the screen at the same time * An RGB-input picture may not be displayed in these modes, depending on the input signal specifications. 1. Press the MULTI button to select a screen mode from among single mode, side by side, and picture in picture. Side by side 1 VIDEO1RGB/PC1 AB Press the cursor buttons on the remote control to switch either side by side 1 (with ) or side by side 2 (with ). Note: Picture A and B on the above screen are not always of the same height. Side by side 2 VIDEO1RGB/PC1 Sub screenMain screen Picture in picture VIDEO1 Sub screenMain screen RGB/PC1 Press the cursor buttons on the remote control to switch the position of the sub screen. VIDEO1 Sub screenMain screen RGB/PC1 2. If you wish to switch the setting of the picture, press the SELECT button to make the desired picture active. Each press of the SELECT button changes the selection of the active picture. MULTI SCREEN Operations VIDEO1RGB/PC1 AB VIDEO1RGB/PC1 AB Selecting the input signals to be displayed 1. Press the SELECT button to make the desired picture active. 2. Press the RGB/PC, VIDEO, or DVD/HD button. Each press of the button changes the selection of the input signal. The INPUT SELECT button on the monitor can also be used to change the selection. Adjusting the OSM controls 1. Press the PROCEED button to display the MAIN MENU. 2. Adjust the setting to your preference. For details, see “OSM (On Screen Menu) Controls” on page E-17. Note: During multi mode, Auto Adjust does not affect the screen. Information Positioning on the screen (for side by side) Depending on the input-signal selection, positioning of the picture is settled as follows. Pictures displayed on the left ........VIDEO1, VIDEO2, VIDEO3, HD1/ DVD1/DTV1, or HD2/DVD2/ DTV2 Pictures displayed on the right ......RGB/PC1, RGB/PC2, RGB/PC3 Positioning on the screen (for picture in picture) Pictures displayed Main screen ....RGB/PC1, RGB/PC2, RGB/PC3, HD 1/DVD 1/DTV 1, or HD 2/ DVD 2/DTV 2 Sub screen ......VIDEO1, VIDEO 2, VIDEO 3, HD1/ DVD1/DTV1, or HD2/DVD2/DTV2 Multi screen operations may not function depending on the type of the RGB signals.
E-17 Menu Operations The OSM window is displayed with respect to the screen as shown on the diagram. * Depending on the screen’s mode, the OSM may be displayed differently. In the explanation, the OSM section is shown close up. MAIN MENU PICTURE SOUND SCREEN FUNCTION OPTIONS INFORMATION SEL. OK EXITEXITPROCEED The following describes how to use the menus and the selected items. 1. Press the PROCEED button on the remote control to display the MAIN MENU. MAIN MENU PICTURE SOUND SCREEN FUNCTION OPTIONS INFORMATION SEL. OK EXITEXITPROCEED 2. Press the cursor buttons on the remote control to highlight the menu you wish to enter. 3. Press the PROCEED button on the remote control to select a submenu or item. PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. NRMEMORY 2 OFF : : : RG SEL.ADJ. RETURNEXIT 4. Adjust the level or change the setting of the selected item by using the cursor buttons on the remote control. OSM(On Screen Menu) Controls 5. The change is stored until you adjust it again. 6. Repeat steps 2 – 5 to adjust an additional item, or press the EXIT button on the remote control to return to the main menu. Note: The main menu disappears by pressing the EXIT button.
E-18 Main menu Sub menu Functions Default Reset PICTURE CONTRAST Adjusts the contrast. Center Yes BRIGHTNESS Adjusts the brightness. Center Yes SHARPNESS Adjusts the sharpness. Center Yes COLOR Adjusts the color. Center Yes TINT Adjusts the tint. Center Yes PICTURE MODE Sets the picture mode according to the VIDEO environment and MEMORY Yes image software. COLOR TEMP Adjusts the color temperature and white balance. 2* 1Ye s NR Reduces noise visible in image. OFF Yes Main menu Sub menu Functions Default Reset SOUND BASS Sets the bass. Center Yes TREBLE Sets the treble. Center Yes BALANCE Sets the left/right balance. Center Yes Main menu Sub menu Functions Default Reset SCREEN V-POSITION Adjusts the vertical position. Center Yes H-POSITION Adjusts the horizontal position. Center Yes V-HEIGHT Adjusts the vertical size. Min Yes H-WIDTH Adjusts the horizontal size. Min Yes AUTO PICTURE Turn this on to have the monitor automatically adjust “FINE PICTURE” OFF* 1No and “PICTURE ADJ”. FINE PICTURE Adjusts for flickering on the computer image. Min* 1Ye s PICTURE ADJ. Adjusts for striped patterns on the computer image. Center*1Ye s Main menu Sub menu Functions Default Reset FUNCTION OSM Turns the on-screen menu (screen mode, etc.) off (when set to “OFF”).ON Yes When set to “ON”, the on-screen menu is displayed. OSM ADJ. Adjusts the vertical and horizontal positions of the menu display. 1 Yes POWER MGT Sets the monitor for use as an energy-saving display when used with a OFF Yes computer. GRAY LEVEL In case of 4 : 3, sets the luminance of both sides. 3 Yes CINEMA MODE Sets the picture to suit the movie. ON Yes RGB3 ADJ. Adjusts the picture when the picture input from the RGB3 input 1 Yes terminal is distorted. LONG LIFE Sets the picture to reduce burn-in of the display. * 2Ye s RESET Resets all the settings (PICTURE, SOUND, SCREEN, FUNCTION, — — etc.) to the factory default values. Main menu Sub menu Functions Default Reset OPTION AUDIO INPUT Sets the allocation of the audio connectors. * 3Ye s BNC SELECT Sets the BNC connectors. RGB Yes RGB SELECT Sets the appropriate mode for the computer image. AUTO Yes RGB (VGA signals), VIDEO (Moving picture), WIDE (WIDE VGA) DTV. HD SELECT Sets the digital broadcasting (1080A,1080B) or the High Vision (1035I).1080B No PICTURE SIZE Sets the picture size for RGB input. ON Yes Main menu Sub menu Functions Default Reset INFORMATION FREQUENCY Used to check the frequency and synchronizing polarities of the signal — — currently being inputted. LANGUAGE Sets the language of the menus (Japanese, English, German, French, English No Swedish, Italian or Spanish). COLOR SYSTEM Sets the VIDEO format (AUTO1, AUTO2, PAL, PAL-M, PAL-N, PAL60, AUTO1 No SECAM, 4.43 NTSC or 3.58 NTSC). *1 RGB/PC only. *2 PLE: AUTO ORBITER: OFF INVERSE: OFF *3 AUDIO1: VIDEO1 AUDIO2: HD/DVD1 AUDIO3: RGB1
E-19 Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the and buttons to select “PICTURE”, then press the PROCEED button. The “PICTURE” screen appears. 2. Use the and buttons to select “CONTRAST”. PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. NRMEMORY 2 OFF : : : RG SEL.ADJ. RETURNEXIT 3. Use the and buttons to adjust the contrast. CONTRAST * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears.4.Once the adjustment is completed ... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Note: If “CAN NOT ADJUST” appears ... When trying to enter the PICTURE submenu, make sure PICTURE MODE is set to MEMORY. Information Picture adjustment screen CONTRAST ....Changes the picture’s contrast. BRIGHTNESS. Changes the picture’s brightness. SHARPNESS.. Changes the picture’s sharpness. Adjusts picture detail of VIDEO display. COLOR ...........Changes the color density. TINT ................Changes the picture’s tint. Adjust for natural colored skin, background, etc. Adjusting the computer image Only the contrast and brightness can be adjusted when a computer signal is connected. Restoring the factory default settings Select “RESET” under the “PICTURE MODE” settings.
E-20 Setting the picture mode according to the brightness of the room There are four picture modes that can be used effectively according to the environment in which you are viewing the display. Example: Setting the “THEATER” mode Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the and buttons to select “PICTURE”, then press the PROCEED button. The “PICTURE” screen appears. 2. Use the and buttons to select “PICTURE MODE”. PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. NRMEMORY 2 OFF : : : RG SEL.ADJ. RETURNEXIT 3. To set to “THEATER” ... Use the and buttons to select “THEATER”. The mode switches as follows when the and buttons are pressed: → MEMORY ↔ THEATER ↔ NORMAL ↔ RESET ← PICTURE MODE THEATER : * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.4.Once the adjustment is completed ... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Types of picture modes MEMORY........The last picture adjustments are stored here. THEATER........Set this mode when watching video in a dark room. This mode provides darker, finer pictures, like the screen in movie theaters. CONTRAST = 80% for RESET mode BRIGHTNESS = 95% for RESET mode NORMAL.........Set this mode when watching video in a bright room. This mode provides dynamic pictures with distinct differences between light and dark sections. CONTRAST = 96% for RESET mode RESET............Use this to reset the picture to the factory default settings.
E-21 Setting the color temperature Use this procedure to set color tone produced by the plasma display. Example: Setting “1” Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the and buttons to select “PICTURE”, then press the PROCEED button. The “PICTURE” screen appears. 2. Use the and buttons to select “COLOR TEMP.”. PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. NRMEMORY 2 OFF : : : RG SEL.ADJ. RETURNEXIT 3. Use the and buttons to select “1”. The mode switches as follows when the and buttons are pressed: → 1 ↔ 2 ↔ 3 ↔ PRO ← * See page E-22 to set “PRO”. COLOR TEMP.1 : * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.4.Once the setting is completed... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Setting the color temperature 1 ......................High (bluer) 2......................... Middle (Standard) 3 ......................Low (redder) Restoring the factory default settings Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
E-22 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality. Example: Adjusting the “WHITE BALANCE” Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the and buttons to select “PICTURE”, then press the PROCEED button. The “PICTURE” screen appears. 2. Use the and buttons to select “COLOR TEMP.”. PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. NRMEMORY 2 OFF : : : RG SEL.ADJ. RETURNEXIT 3. Use the and buttons to select “PRO”. The mode switches as follows when the and buttons are pressed: → 1 ↔ 2 ↔ 3 ↔ PRO ← PRO :COLOR TEMP. * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.4. Press the PROCEED button. The “WHITE BALANCE” screen appears. 5. Use the and buttons to select “RED-GAIN”. WHITE BALANCE GAIN RED GREEN BLUE BIAS RED GREEN BLUE SEL.ADJ. RETURNEXIT 6. Adjust the white balance using the and buttons. R-GAIN * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. 7.Once the adjustment is completed... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Adjusting the white balance RGB-GAIN....... White balance adjustment for signal level RGB-BIAS .......White balance adjustment for black level Restoring the factory default settings Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
E-23 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor. Example: Setting “NR-3” Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the and buttons to select “PICTURE”, then press the PROCEED button. The “PICTURE” screen appears. 2. Use the and buttons to select “NR”. PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. NRMEMORY 2 OFF : : : RG SEL.ADJ. RETURNEXIT 3. Use the and buttons to select “NR-3”. The mode switches as follows when the and buttons are pressed: → OFF ↔ NR-1 ↔ NR-2 ↔ NR-3 ← NRNR-3 : * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.4. Once the setting is completed ... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information NR * “NR” stands for Noise Reduction. * This function reduces noise in the picture. Types of noise reduction There are three types of noise reduction. Each has a different level of noise reduction. The effect becomes stronger as the number increases (in the order NR-1 → NR-2 → NR-3). OFF ...............Turns the noise reduction function off.
E-24 Sound Settings Menu Adjusting the treble, bass and left/right balance The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the and buttons to select “SOUND”, then press the PROCEED button. The “SOUND” screen appears. 2.To adjust the bass ... Use the and buttons to select “BASS”. SOUND BASS TREBLE BALANCE LR SEL.ADJ. RETURNEXIT 3. Adjust the bass using the and buttons. SOUND BASS TREBLE BALANCE LR SEL.ADJ. RETURNEXIT * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.To continue adjusting the sound ... Repeat from step 2. 4.Once the adjustment is completed ... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Note: If “CAN NOT ADJUST” appears... Set “AUDIO INPUT” on the OPTION menu correctly. Information Sound settings menu BASS ..............Changes the level of low frequency sound. TREBLE ..........Changes the level of high frequency sound. BALANCE .......Changes the balance of the left and right channels. Restoring the factory default settings Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
E-25 3. Adjust using the and buttons. V–POSITION * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. To continue making other computer image adjustments ... Repeat from step 2. 4.Once all adjustments are completed ... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information When “AUTO PICTURE” is “OFF” SCREEN MODE V–POSITION H–POSITION V–HEIGHT H–WIDTH AUTO PICTURE FINE PICTURE PICTURE ADJ.FULL : OFF : SEL.ADJ. RETURNEXIT When Auto Picture is off, the Fine Picture and the Picture ADJ items are displayed so that you can adjust them. Screen Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the and buttons to select “SCREEN”, then press the PROCEED button. The “SCREEN” menu appears. Default settings (when RGB/PC is selected) SCREEN MODE V–POSITION H–POSITION V–HEIGHT H–WIDTH AUTO PICTURE FINE PICTURE PICTURE ADJ.NORMAL : OFF : SEL.ADJ. RETURNEXIT * The settings on the SCREEN menu are not preset at the factory. To select a mode ... Use the and buttons to select a mode. The mode switches as follows when the and buttons are pressed: → NORMAL ↔ FULL ← * The mode can also be switched by pressing the “WIDE” button on the remote control. 2.To adjust the vertical position ... Use the and buttons to select “V-POSITION”. SCREEN MODE H–POSITION V–HEIGHT H–WIDTH AUTO PICTURE FINE PICTURE PICTURE ADJ.NORMAL : OFF : SEL.ADJ. RETURNEXIT V–POSITION