NEC Plasmasync 61mp1 Users Manual

							E-26
Information
 Adjusting the Auto Picture
ON ...................The Picture ADJ and Fine Picture
adjustments are made automatically.
OFF .................The Picture ADJ and Fine Picture
adjustments are made manually.
 Adjusting the position of the image
V-POSITION ...Adjusts the vertical position of the
image.
H-POSITION... Adjusts the horizontal position of the
image.
V-HEIGHT .......Adjusts the vertical size of the image.
(Except for STADIUM mode)
H-WIDTH ......... Adjusts the horizontal size of the
image. (Except for STADIUM mode)
FINE PICTURE* .. Adjusts for flickering.
PICTURE ADJ* ....Adjusts for striped patterns on the
image.
* The Picture ADJ and Fine Picture features are available
only when the “Auto Picture” is off.
* The AUTO PICTURE, FINE PICTURE and PICTURE
ADJ. are not available for VIDEO and HD/ DVD source.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults
except for Auto Picture.
Function Settings Menu
Setting the on-screen menu
When using the monitor for presentations, etc., the monitor
can be set so that the input source, screen mode, etc., do
not appear.
Example: Turning the on-screen menu mode off
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “OSM”.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
1 :
SEL.ADJ. RETURNEXIT
LONG LIFE RGB3 ADJ.
RESET
3.To turn the on-screen menu mode off ...
Use the 

 and  buttons to select “OFF”.
The mode switches as follows each time the 

 or 
button is pressed:
ON ↔ OFF
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEOFF
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 OSM modes
ON ...................The on-screen menu appears.
OFF .................The on-screen menu does not appear.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
 
						

							E-27
Adjusting the position of the menu display
Use these operations to adjust the position of the menus
that appear on the screen.
Example: Adjusting the position of the menu display
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”,
then press the PROCEED button.
The “FUNCTION” menu appears.
2. Use the 
 and  buttons to select “OSM ADJ.”
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
LONG LIFERGB3 ADJ. 
RESET1
:
3.To adjust the position...
Adjust using the 

 and  buttons.
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
FUNCTION
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
2
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
LONG LIFERESET1 : RGB3 ADJ.
4.Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 Adjusting the position of the menu display
123
456
789
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.The position can be set
between 1 and 9.
 
						

							E-28
Setting the power management for computer images
This energy-saving (power management) function
automatically reduces the monitor’s power consumption
if no operation is performed for a certain amount of time.
Example: Turning the power management function on
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “POWER MGT”.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
3.To turn the power management function on ...
Use the 

 and  buttons to select “ON”.
The mode switches as follows each time the 

 or 
button is pressed:
ON ↔ OFF
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
ON
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 Power management function
* The power management function automatically reduces
the monitor’s power consumption if the computer’s
keyboard or mouse is not operated for a certain amount
of time. This function can be used when using the
monitor with a computer conforming to the VESA
DPMS format.
* If the computer’s power is not turned on or if the
computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer’s power
management function, refer to the computer’s operating
instructions.
 Power management settings
ON ...................In this mode the power management
function is turned on.
OFF .................In this mode the power management
function is turned off.
 Power management function and POWER/
STANDBY indicator
The POWER/STANDBY indicator indicates the status
of the power management function. See page E-29 for
indicator status and description.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
 
						

							E-29
POWER/STANDBY indicator
Power management
mode
On
Standby
Suspend
Off
POWER/STANDBY
indicator
Green
Orange
Red
Red Description
Horizontal and vertical synchronizing
signals are present from the computer.
No horizontal synchronizing signals
are sent from the computer.
No vertical synchronizing signals are
sent from the computer.
No horizontal or vertical synchronizing
signals are sent from the computer.
Turning the picture back on
Picture already on.
Operate the keyboard or mouse. The
picture reappears immediately.
Operate the keyboard or mouse. The
picture reappears, but more time is
required than from the standby
mode.
Operate the keyboard or mouse. The
picture reappears, but more time is
required than from the standby mode
or  suspend mode.Power management
operating status
Not activated.
Activated.
Activated.
Activated.
 
						

							E-30
Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the
screen on which nothing is displayed when the screen is
set to the 4:3 size.
Example: Adjusting the “GRAY LEVEL”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “GRAY LEVEL”.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
3.To adjust the “GRAY LEVEL”...
Use the 

 and  buttons to adjust the GRAY LEVEL.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
9
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 GRAY LEVEL
This adjusts the brightness of the black (the gray level)
for the sides of the screen.
The standard is 0 (black). The level can be adjusted
from 0 to 15. The factory setting is 3 (dark gray).
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
Setting the picture to suit the movie
The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, 480I (60Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
Press the PROCEED button on the remote control unit to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “CINEMA MODE”.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
3.To set the CINEMA MODE to “OFF” ...
Use the 

 and  buttons to select “OFF”.
The mode switches as follows each time the 

 or 
button is pressed:
→ ON ↔ OFF ←
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
OFF :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 CINEMA MODE
ON ...................Automatic discrimination of the
image and projection in cinema mode.
OFF................... Cinema mode does not function.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
 
						

							E-31
Setting RGB3 ADJ.
When the picture input from the RGB3 input terminal is
distorted, select the most appropriate setting from among
“1”, “2”, and “3”.
Example: Setting “2”
Press the PROCEED button on the remote control to
display MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”,
then press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “RGB3 ADJ.”.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
1 :
LONG LIFE RGB3 ADJ.
RESET
3.To select “2”...
Use the 

 and  buttons to select “2”.
The mode switches as follows each time the 

 or 
buton is pressed:
→ 1 ↔ 2 ↔ 3 ←
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
SEL.ADJ. RETURNEXIT
2 :
LONG LIFE RGB3 ADJ.
RESET
4.Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 When you adjust the RGB3 ADJ.
The position of the menu display will change. In such
a case, be sure to adjust the position.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
Reducing burn-in of the screen
The brightness of the screen, the position of the picture,
and positive/negative mode are adjusted to reduce burn-
in of the screen.
Example: Setting “PLE” to “LOCK”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then proceed as
follows.
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “LONG LIFE”, then
press the PROCEED button.
The “LONG LIFE” screen appears.
3. Use the 
 and  buttons to select “PLE”, then use the

 and  buttons to select “LOCK”.
The mode switch changes as follows each time the 


or  button is pressed:
AUTO ↔ LOCK
4.Once the setting is completed...
Press the EXIT button to return to the FUNCTION
menu.
To exit the main menu, press the EXIT button twice.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODEON
1
OFF
3
ON :
:
:
:
:
1 : RGB3 ADJ.
SEL. RETURNEXITPROCEEDOK
LONG LIFE
RESET
LONG LIFE
PLE
ORBITER
INVERSEOFF
OFF LOCK :
:
:
SEL.ADJ. RETURNEXIT
 
						

							E-32
Information
 PLE
AUTO ..............The brightness of the screen is
adjusted automatically to suit the
picture quality.
LOCK ..............The brightness level is set to
minimum.
 ORBITER
ON ...................The picture moves around the screen
intermittently.
OFF .................Orbiter mode does not function.
 INVERSE
ON..................... The picture is displayed alternately
between positive image and negative
image.
OFF .................Inverse mode does not function.
WT ..................The entire screen turns white.
 Restoring the factory default settings
Select “RESET” from the function menu. Note that this
also restores other settings to the factory defaults.
Resetting to the default values
Use these operations to restore all the picture adjustments,
audio settings, to the factory default values.
Refer to page E-18 for items to be reset.
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the 
 and  buttons to select “RESET”, then press
the PROCEED button.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
LONG LIFE CINEMA MODE
RESETON
1
OFF
3
ON :
:
:
:
:
SEL. RETURNEXITOKPROCEED
1 : RGB3 ADJ.
The “RESET” screen appears.
3. Use the 
 and  buttons to select “RESET”, then press
the PROCEED button.
RESET
RESET
RETURN
OK RETURNEXITPROCEED
SETTING NOW
RESET
When the “SETTING NOW” screen disappears, the
screen will be restored to the previous “RESET” mode,
then all the settings are restored to the default values.
4. Once the setting is completed ...
Press the EXIT button.
To delete the main menu, press the EXIT button once
more.
 
						

							E-33
Option Settings Menu
Setting the allocation of the audio connectors
Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting “AUDIO 1” to “VIDEO 2”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “OPTION”, then
press the PROCEED button.
The “OPTION” screen appears.
2. Use the 
 and  buttons to select “AUDIO 1”.
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZEVIDEO1
RGB1
RGB
AUTO
1080B
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
HD/DVD1
3.To set the AUDIO1 to “VIDEO2”...
Use the 

 and  buttons to select “VIDEO2”.
The mode switches as follows each time the 

 or 
button is pressed:
→ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ↔ RGB/PC1 ↔ RGB/PC2 ↔ RGB/PC3 ←
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
RGB
AUTO
1080B
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
VIDEO2
RGB1 HD/DVD1
4.Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
Setting the BNC connectors
Select whether to set the input of the 5 BNC connectors to
RGB or component.
Example: Set the BNC SELECT mode to “COMP.”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “OPTION”, then
press the PROCEED button.
The “OPTION” screen appears.
2. Use the 
 and  buttons to select “BNC SELECT”.
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
RGB
AUTO
1080B
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
VIDEO1
RGB1 HD/DVD1
3.To set the BNC SELECT mode to “COMP.”...
Use the 

 and  buttons to select “COMP.”.
The mode switches as follows each time the 

 or 
button is pressed:
→ RGB ↔ COMP. ↔ SCART ←
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
COMP.AUTO1080B
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
VIDEO1
RGB1 HD/DVD1
4.Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
 
						

							E-34
Information
 BNC SELECT
RGB ................ Uses the 5BNC terminal for RGB
input.
COMP. .............Use the 3BNC terminal for component
input.
SCART ............Use the 4BNC terminal for RGB with
composite sync input. See page E-8.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the “RGB SELECT” mode to
“MOTION ”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “OPTION”, then
press the PROCEED button.
The “OPTION” screen appears.
2. Use the 
 and  buttons to select “RGB SELECT”.
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
RGB
AUTO
1080B
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
OPTION
VIDEO1
RGB1 HD/DVD1
3.To set the RGB select mode to “MOTION” ...
Use the 

 and  buttons to select “MOTION”.
The mode switches as follows each time the 

 or 
button is pressed:
→ AUTO ↔ STILL ↔ MOTION ↔ WIDE1 ↔ WIDE2 ↔ DTV ←
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
RGB
MOTION
1080B
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
VIDEO1
RGB1 HD/DVD1
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
 
						

							E-35
Information
 RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO ..............Select the suitable mode for the
specifications of input signals as
listed in the table “Computer input
signals supported by this system” on
page E-47.
STILL ..............To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION ..........The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE1 .............When an 852 dot 480 line signal
with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2 .............When an 848 dot 480 line signal
with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
DTV .................Set this mode when watching digital
broadcasting (480P).
See page E-47 for the details of the above settings.
 Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the “1080B” mode to “1035I”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the 
 and  buttons to select “OPTION”, then
press the PROCEED button.
The “OPTION” screen appears.
2. Use the 
 and  buttons to select “HD SELECT”.
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
RGB
AUTO
1080B
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
VIDEO1
RGB1 HD/DVD1
3.To set the HD SELECT mode to “1035I” ...
Use the 

 and  buttons to select “1035I”.
The mode switches as follows each time the 

 or 
button is pressed:
 →1080A ↔ 1080B ↔ 1035I  ←
OPTION
AUDIO INPUT
   AUDIO1
   AUDIO2
   AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
RGB
AUTO
1035I
ON :
:
:
:
:
:
:
SEL.ADJ. RETURNEXIT
VIDEO1
RGB1 HD/DVD1
4.Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
 HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080A...............Special Digital broadcasts (for
example : DTC100)
1080B............... Standard digital broadcasts
1035I ...............Japanese “High Vision” signal format