NEC P350x Projector User Manual

							3
1. Introduction
• 10 W built-in speaker for an integrated audio solution
	 Powerful	10	watt	monaural	speaker	provides	volume	need	for	large	rooms.
• The supplied remote control allows you to assign a CONTROL ID to the projector
	 Multiple 	projectors 	can	 be	operated 	separately 	and	 independently 	with 	the	 same 	single	 remote	 control	by	assigning 	
an	ID	number	to	each	projector.
• Vertical keystone correction
	 Keystone	feature	allows	the	projector	to	correct	vertical	distortion.
• USB Display 
	 Using	 a	commercially	 available	USB	cable	 (compatible	 with	USB	 2.0	specifications)	 to	connect	 the	computer	 with	
the	projector	 allows	you	to	send	 your	computer	 screen	image	to	the	 projector	 without	the	need	 of	a	traditional	
computer	cable	(VGA).
•  Integrated RJ-45 connector for wired networking capability along with wireless networking capabilities
	 An	 RJ-45	connector	 is	standard. 	A	 wireless	 LAN	unit	is	equipped	 with	the	projector	 for	models	 distributed	 in	North	
America	 models.	An	 optional	 wireless	 LAN	unit	is	available	 for	models	 for	Europe,	 Australia,	 Asia	and	other	 coun-
tries	than	North	America.
• Software programs (User Supportware) contained in the supplied CD-ROM
	 The	 supplied	 NEC	Projector	 includes	seven	programs: 	Virtual	 Remote	 Tool,	Image	 Express	 Utility	Lite,	Image	
Express	 Utility	2.0,	Desktop	 Control	Utility	1.0,	PC	Control	 Utility	Pro	4,	Viewer	 PPT	Converter	 3.0,	and	Image	
Express	Utility	2	for	Mac. 	
• LAN-compatible Viewer
	 The	 projector’s	 built-in	Viewer	 allows	you	to	view	 images	 or	movie	 files	in	the	 shared	 folder	of	your	 PC	connected	
to	a	wired	or	wireless	LAN.
	 *	 The	Viewer	supports	the	Media	Sharing	function	of	 Windows	Media	Player	11.
• AUTO POWER ON and AUTO POWER OFF features
	 The	 AUTO	POWER	 ON(AC),	 AUTO	POWER	 ON(COMP1),	 AUTO	POWER	 OFF,	and	OFF	 TIMER	 features	 eliminate 	
the	need	to	always	use	the	POWER	button	on	the	remote	control	or	projector	cabinet.
• Preventing unauthorized use of the projector
	 Enhanced	 smart	security	 settings	for	keyword	 protection,	 cabinet	control	panel	lock,	security	 slot,	and	security	
chain	opening	to	help	prevent	unauthorized	access,	adjustments	and	theft	deterrence.
• High resolution up to UXGA
	 High	resolution	display	-	up	to	UXGA	compatible,	XGA	(P420X/P350X)/WXGA	(P350W)	native	resolution.
• Crestron RoomView® supported 
	 The	 projector	 suppors	Crestron	 RoomView	 which	allows	 you	to	control	 and	manage	 equipment	 connected	to	your	
network	from	your	computer.
About this user’s manual
The	 fastest	 way	to	get	 started	 is	to	 take	 your	 time	and	do	everything	 right	the	first	 time. 	Take	 a	few	 minutes	 now	to	
review	 the	user’s	 manual. 	This	 may	save	 you	time	 later	 on.	At	 the	 beginning	 of	each	 section	 of	the	 manual	 you’ll	find	
an	overview. 	If	the	section	doesn’t	apply,	you	can	skip	it. 
						

							4
1. Introduction
 Part Names of the Projector
Front/Top
Controls(→ page 6)
Lens Shift Dial (Vertical)
(→ page 18)
Lens
Remote Sensor(→ page 9) Ventilation (inlet) / Filter Cover
(→ page 143, 150)
Zoom Lever (→ page 20)Lens Cover
Focus Lever
(→ page 19)
Adjustable Tilt Foot   
(→ page 21)
Adjustable Tilt Foot Lever 
 
(→ page 21)
Ventilation (outlet)
Heated air is exhausted from here. 
						

							5
1. Introduction
Opening and closing the lens cover
Slide	the	lens	cover	to	the	left	to	uncover	the	lens.
To	cover	the	lens,	slide	the	lens	cover	to	the	right.
NOTE:
•	 The	lens	cover	 works	 in	conjunction	 with	the	AV	mute	 function.	 Closing	the	lens	 cover	 will	turn	 off	the	 image	 and	sound	 during	
normal	projector	operation;	opening	it	will	restore	the	image	and	sound.
	 With	 the	lens	 cover	 closed	 the	image	 and	sound	 is	turned	 off,	however	 the	lamp	 is	still	 lit.	If	the	 projector	 stays	this	way	 for	about	
2	hours,	it	will	turn	off	automatically.
•	 Do	 not	pull	 the	lens	 cover	 with	excessive	 force	or	apply	 strong	 pressure	 in	either	 the	up	or	down	 direction.	 Doing	so	can	 cause	
damage	to	the	lens	cover	sliding	mechanism!
Port Cover for  
USB Wireless LAN Unit 
When using the USB Wireless LAN  Unit, first remove the cover. ( → 
page 141)
Terminal Panel (→ page 7)
Monaural	Speaker	(10	 W)
Lamp Cover (→ page 148)
Rear
Remote Sensor(→ page 9)
AC InputConnect the supplied power cord’s 
three-pin plug here, and plug the 
other end into an active wall outlet.  (→ page 13)
*	 This	security	slot	supports	the	MicroSaver	®	Security	System.
Rear Foot (→ page 21) Security chain opening 
Attach an anti-theft device.
The security chain opening accepts 
security wires or chains up to 0.18 
inch/4.6 mm in diameter. Built-in Security Slot ( 
 )*
Cable cover connection (right and left) 
Screw holes and grooves for the  optional cable cover 
						

							6
1. Introduction
Top Features
1/25
6
4 7
81
1
9
3 10
1.
  (POWER) Button (→	page	14, 25)
2. POWER Indicator (→	page	13, 14, 25, 192)
3.  STATUS Indicator (→	page	192)
4.  LAMP Indicator (→	page	147, 192)
5.  ECO Button (→	page	28)
6.  SOURCE Button (→	page	16)
7.  AUTO ADJ. Button (→	page	24)
8.  MENU Button (→	page	78)
9.    / Volume  Buttons   /  Keystone  Buttons 
 (→
	page	22, 24)
10.  ENTER Button (→	page	78)
11.  EXIT Button (→	page	78) 
						

							7
1. Introduction
Terminal Panel Features
1235613 1287
11149
10
4
1.  COMPUTER 1 IN/ Component Input Connector 
(Mini D-Sub 15 Pin)	(→	page	132, 136, 157)
2.  COMPUTER 1 AUDIO IN Mini Jack (Stereo Mini)  
(→
	page	132, 134, 136)
3.  COMPUTER 2 IN / Component Input Connector 
(Mini D-Sub 15 Pin) (→	page	132, 136)
4.  COMPUTER 2 AUDIO IN Mini Jack (Stereo Mini)  
(→
	page	132, 134, 136)
5.  HDMI IN Connector (Type A)  
(→
	page	132, 137)
6.  USB (PC) Port (Type B)  
(→
	page	33, 34, 132)
7.  MONITOR  OUT  (COMP.  1)  Connector  (Mini  D-Sub 
15 Pin) (→	page	134)
8.  AUDIO OUT Mini Jack (Stereo Mini)	(→	page	134)
9.  S-VIDEO IN Connector (Mini DIN 4 Pin)
	( →	page	135)
10. VIDEO IN Connector (RCA)	(→	page	135)
11.  VIDEO/S-VIDEO AUDIO IN L/MONO, R (RCA)  
(→
	page	135)
12.  LAN Port (RJ-45)	(→	page	141)
13.  USB Port (Type A)	(→	page	59, 180)
14.  PC CONTROL [PC CONTROL] Port (D-Sub 9 Pin)  
(→
	page	200)
	 Use	 this	port	 to	connect	 a	PC	 or	control	 system. 	This	
enables	 you	to	control	 the	projector 	using 	serial 	commu-
nication	 protocol. 	If	 you	 are	writing	 your	own	program,	
typical	PC	control	codes	are	on	page	200. 
						

							8
1. Introduction
 Part Names of the Remote Control
3
7
5
6
1
2
10
15
16
14
179
4
8
13
29
30
31
19
20
25
27
28 24
18
23
22 21
26
32
12
11
1.
 Infrared Transmitter
	( →	page	9)
2. POWER ON Button
	( →	page	14)
3. POWER OFF Button
	( →	page	25)
4, 5, 6. COMPUTER 1/2/3 Button
	( →
	page	16)	
	 (COMPUTER	3	button	is	not	available.)
7. AUTO ADJ. Button
	( →	page	24)
8. VIDEO Button
	( →	page	16)
9. S-VIDEO Button
	( →	page	16)
10. HDMI Button (→	page	16)
11.  VIEWER Button (→	page	16, 56)
12.  NETWORK Button (→	page	16)
13.  USB DISPLAY Button (→	page	16)
14.  ID SET Button
	( →	page	96)
15. Numeric Keypad Button/CLEAR Button
	( →	page	96)
16. FREEZE Button
	( →	page	27)
17. AV-MUTE Button
	( →	page	27)
18. MENU Button
	( →	page	78)
19. EXIT Button (→	page	78)
20.   Button (→	page	78)
21. ENTER Button (→	page	78)
22.  D-ZOOM (+)(–) Button
	( →	page	27)
23. MOUSE L-CLICK Button*
	( →	page	33)
24. MOUSE R-CLICK Button*
	( →	page	33)
25. PAGE / Button*
	( →
	page	33)
26. ECO Button (→	page	28)
27.  KEYSTONE Button
	( →	page	23)
28. PICTURE Button
	( →	page	83, 85)
29. VOL. (+)(–) Button
	( →	page	24)
30. ASPECT Button
	( →	page	88)
31. FOCUS/ZOOM Button
	 (not	available	on	this	series	of	projectors)
32.  HELP Button
	( →	page	101)
*	 The 	PAGE 	/ , ,	MOUSE	 L-CLICK	 and	MOUSE	 R-CLICK	 buttons	work	only	when	 a	USB	 cable	 is	connected 	
with	your	computer.. 
						

							9
1. Introduction
Remote Control Precautions
•	 Handle	the	remote	control	carefully.
•	 If	the	remote	control	gets	wet,	wipe	it	dry	immediately.
•	 Avoid	excessive	heat	and	humidity.
•	 Do	not	short,	heat,	or	take	apart	batteries.
•	 Do	not	throw	batteries	into	fire.
•	 If	you	will	not	be	using	the	remote	control	for	a	long	time,	remove	the	batteries.
•	 Ensure	that	you	have	the	batteries’	polarity	(+/−)	aligned	correctly.
•	 Do	not	use	new	and	old	batteries	together,	or	use	different	types	of	batteries	together.
•		 Dispose	of	used	batteries	according	to	your	local	regulations.
Operating Range for Wireless Remote Control
1Press	firmly	and	slide	 the	battery	
cover	off.
2Install 	new 	batteries 	(AAA). 	Ensure	
that 	you 	have 	the 	batteries’ 	polarity	
(+/−)	aligned	correctly.
•	 The	 infrared	 signal	operates	 by	line-of-sight	 up	to	a	distance	 of	about	 22	feet/7	 m	and	 within	 a	60-degree	 angle	of	
the	remote	sensor	on	the	projector	cabinet.
•	 The	 projector	 will	not	 respond	 if	there	 are	objects	 between	 the	remote	 control	and	the	sensor,	 or	if	strong	 light	falls	
on	the	sensor. 	Weak	batteries	will	also	prevent	the	remote	control	from	properly	operating	the	projector.
Battery Installation
3Slip	 the	cover	 back	over	the	bat-
teries	 until	it	snaps	 into	place. 	Do	
not	 mix	 different	 types	of	batteries	
or	new	and	old	batteries.
30°
30°
30°
30°
30°
30° 30°
30°
OPEN
7 m/22 feet
7 m/22 feet
7 m/22 feet
7 m/22 feet
Remote control
Remote sensor on projector cabinet
OPEN
Remote control 
						

							10
1. Introduction
 Operating Environment for Software Included on CD-ROM
Names	and	Features	of	Bundled	Software	Programs
Name	of	software	programFeatures
Virtual	Remote	ToolThis	is	a	software	 program	used	to	control	 the	power	 ON/OFF	 and	source	 selec-
tion	of	the	 projector	 from	your	computer	 by	using	 the	supplied	 computer	 cable	
(VGA)	and	it	is	 also	 used	 to	send	 an	image	 to	the	 projector	 and	register	 it	as	 the	
logo	 data	 of	the	 projector. 	After	 registering	 it,	you	 can	 lock	 the	logo	 to	prevent	 it	
from	changing. 	(→	page	155)
Image	Express	Utility	Lite•	 This	is	a	software	 program	used	to	project	 your	computer’s	 screen	over	the	
USB	 cable	 or	the	 wired/wireless	 network.	The	 computer	 cable	(VGA)	 is	not	
required. 	(→	page	34,	page	160)
•	 This	software	 program	can	be	used	 to	control	 the	power	 ON/OFF	 and	source	
selection	of	the	projector	from	your	computer.
•	 The	 Geometric 	Correction 	Tool	 (GCT)	 function 	allows 	you	 to	correct 	distortion	
of	images	projected	on	a	curved	wall. 	(→	page	163)
Image	Express	Utility	2.0•	 This	is 	a 	software 	program 	used 	to 	send 	the 	screens 	of 	your 	personal 	comput-
ers	to	the	projector	via	wired/wireless	LAN	(Meeting	mode).
	 Projected	images	can	be	transferred	and	saved	to	personal	computers.
	 When	 “Meeting	 Mode”	is	 used,	 projected	 images	can	be	sent	 and	saved	 to	
the	personal	 computers. 	Images	 can	be	sent	 from	 a	personal	 computer	 to	
not	only	 one	projector	 but	also	 to	two	 or	more	 projectors	 at	the	 same	 time.	
(→	page	165)
Desktop	Control	Utility	1.0•	 This	 is	a	software	 program	used	to	operate	 the	desktop	 screen	of	a	personal	
computer	 at	a	remote	 location	 by	using	 a	projector	 via	wired/wireless	 LAN.	
(→	page	176)
PC	Control	Utility	Pro	4This	is	a	software	 program	used	to	operate	 the	projector	 from	the	computer	 when	
the	computer	 and	the	projector	 are	connected	 with	LAN	 (wired	 or	wireless)	 or	
a	serial	cable. 	(→	page	185)
Viewer	PPT	Converter	3.0This	is	a	software	 program	used	to	convert	 files	created	 with	PowerPoint	 into	
JPEG	files	that	can	be	displayed	 with	the	viewer	 function	 of	the	 projector	 when	
a	USB	memory	device	is	inserted	into	the	projector. 	(→	page	186)
Image	Express	Utility	for	Mac•	 This	is 	a 	software 	program 	used 	to 	send 	the 	Mac’s 	screen 	image 	to 	the 	projec-
tor	 over	 a	network	 (wired	or	wireless	 LAN).	(→	page	188)	 For	 Mac’s	 operating	
environment,	see	page	188.
NOTE:
•	 Image	 Express	Utility	Lite	does	 not	support	 “Meeting	 Mode”	in	Image	 Express	 Utility	2.0	and	 Image	 Express	 Utility	2	for	 Mac	
included	with	our	other	models.
Download service
For	the	update	information	about	these	software	programs,	visit	our	website:
URL: 	http://www.nec-display.com/dl/en/index.htm l
  
						

							11
1. Introduction
Operating Environment
The	following	 is	the	 operating	 environment	 for	Image	 Express	 Utility	Lite.	For	 the	operating	 environment	 of	other	 soft-
ware	program,	refer	to	the	help	function	of	each	software	program.
Supported	OSWindows	7	Home	Basic
Windows	7	Home	Premium
Windows	7	Professional
Windows	7	Ultimate
Windows	7	Enterprise
Windows	 Vista	Home	Basic
Windows	Vista	Home	Premium
Windows	Vista	Business
Windows	Vista	Ultimate
Windows	Vista	Enterprise
Windows	XP	Home	Edition	Service	Pack	3	or	later
Windows	XP	Professional	Service	Pack	3	or	later
•	 Only	32-bit	version
•	 Windows	power-saving	function	is	not	supported.
Processor•	 Windows	7/Windows	 Vista
Pentium	M	1.2	GHz	equivalent	or	higher	required
Dual	core	1.5	GHz	or	higher	recommended
•	 Windows	XP
Pentium	M	1.0	GHz	equivalent	or	higher	required
Dual	core	1.0	GHz	or	higher	recommended
Memory•	 Windows	7/Windows	Vista
512	MB	or	more	required
1	GB	or	more	recommended
•	 Windows	XP
256	MB	or	more	required
512	MB	or	more	recommended
*	More	memory	may	be	required	to	run	additional	applications	simultaneously.
Graphic	processor	•	 Windows	7/Windows	Vista
The	“Graphics” 	score	3.0	or	more	of	 “Windows	Experience	Index” 	recommended.
Network	environmentTCP/IP-compatible	wired	LAN	or	wireless	LAN
(*	Use	a	wireless	LAN	unit	complying	with	the	 Wi-Fi	standard.)
Resolution•	 Windows	7/Windows	Vista	
SVGA	(800	×	600)	or	higher	required
XGA	(1024	×	768)	recommended	
•	 Windows	XP	
VGA	(640	×	480)	or	higher	required
XGA	(1024	×	768)	recommended
1024	dots	×	768	lines	-	1280	dots	×	800	lines	recommended	(P350W)
Screen	ColorsHigh	Color	(15	bits,	16	bits)
True	Color	(24	bits,	32	bits)	(recommended)
•	 256	or	fewer	colors	are	not	supported. 
						

							12
This	section	describes	how	to	turn	on	the	projector	and	to	project	a	picture	onto	the	screen.
1 Flow of Projecting an Image
Step 1
•	 Connecting	your	computer	/	Connecting	the	power	cord	(→	page	13)
 
Step 2 
•	 Turning	on	the	projector	(→	page	14)
 
Step 3 
•	 Selecting	a	source	(→	page	16)
 
Step 4
•	 Adjusting	the	picture	size	and	position	(→	page	17)
•	 Correcting	keystone	distortion	[KEYSTONE]	(→	page	22)
 
Step 5
•	 Adjusting	a	picture	and	sound
- Optimizing a computer signal automatically (→ page 24)
- Turning up or down volume (→ page 24)
 
Step 6
•	 Making	a	presentation
 
Step 7
•	 Turning	off	the	projector	(→	page	25)
 
Step 8
•	 After	use	(→	page	26)
2. Projecting an Image (Basic Operation)