NEC P350x Projector User Manual
Have a look at the manual NEC P350x Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 87
69
4. Using the Viewer
2. Displays the [OPTIONS] menu.
Press the ▼ button to select the (OPTIONS) icon and press the ENTER button.
• When the OPTIONS menu is displayed, the drive list will not be displayed.
3. Display the [SHARED FOLDER SETTING] screen.
Press the ▼ button to select the (SHARED FOLDER SETTING) icon and press the ENETR b\
utton.
4. Select a folder number and place to enable it.
Press the ◀ or ▶ button to a shared folder number and press the ▼ button to select [ENABLE] , and then...](http://img.usermanuals.tech/thumb/54/92625/w64_nec-p350x-manual_d-86.png "Page 87
69
4. Using the Viewer
2. Displays the [OPTIONS] menu.
Press the ▼ button to select the (OPTIONS) icon and press the ENTER button.
• When the OPTIONS menu is displayed, the drive list will not be displayed.
3. Display the [SHARED FOLDER SETTING] screen.
Press the ▼ button to select the (SHARED FOLDER SETTING) icon and press the ENETR b\
utton.
4. Select a folder number and place to enable it.
Press the ◀ or ▶ button to a shared folder number and press the ▼ button to select [ENABLE] , and then...")
![Page 88
70
4. Using the Viewer
6. Exit the setting.
Press the ▼ button to select [OK] and press the ENTER button.
This will close the [SHARED FOLDER] screen.
• If an error message appear, your settings are not correct. Try again.](http://img.usermanuals.tech/thumb/54/92625/w64_nec-p350x-manual_d-87.png "Page 88
70
4. Using the Viewer
6. Exit the setting.
Press the ▼ button to select [OK] and press the ENTER button.
This will close the [SHARED FOLDER] screen.
• If an error message appear, your settings are not correct. Try again.")
![Page 89
71
4. Using the Viewer
Disconnecting the shared folder from the projector
• Disable the number of a shared folder you wish to disconnect
Press the ▼ button to select [ENABLE] and press the ENTER button to clear it.
NOTE:
• When a PowerPoint file or PDF file is displayed, do not disconnect your LAN cable. If doing so, the Viewer will not work.
TIP:
• Connecting settings for Shared folder
Settings of up to four folders can be saved.
Restarting the projector will display setting-saved shared...](http://img.usermanuals.tech/thumb/54/92625/w64_nec-p350x-manual_d-88.png "Page 89
71
4. Using the Viewer
Disconnecting the shared folder from the projector
• Disable the number of a shared folder you wish to disconnect
Press the ▼ button to select [ENABLE] and press the ENTER button to clear it.
NOTE:
• When a PowerPoint file or PDF file is displayed, do not disconnect your LAN cable. If doing so, the Viewer will not work.
TIP:
• Connecting settings for Shared folder
Settings of up to four folders can be saved.
Restarting the projector will display setting-saved shared...")
![Page 91
73
4. Using the Viewer
3. Select “Share my media” check box, and then select OK.
A list of accessible devices will be displayed.
4. Select “P420 Series” and then “Allow”.
A check mark will be added to the “P420 Series” icon.
• The “P420 Series” is a projector name specified in [NETWORK SETTINGS].
5. Select “OK”.
This will make pictures and video in “Library” available from the projector.](http://img.usermanuals.tech/thumb/54/92625/w64_nec-p350x-manual_d-90.png "Page 91
73
4. Using the Viewer
3. Select “Share my media” check box, and then select OK.
A list of accessible devices will be displayed.
4. Select “P420 Series” and then “Allow”.
A check mark will be added to the “P420 Series” icon.
• The “P420 Series” is a projector name specified in [NETWORK SETTINGS].
5. Select “OK”.
This will make pictures and video in “Library” available from the projector.")
![Page 94
76
4. Using the Viewer
Disconnecting the projector from the media server
1. Display the OPTIONS menu.
Press the ▼ button to select the [OPTIONS] icon and select the ENTER button.
2. Display the MEDIA SERVER setting screen.
Press the ▼ button to select the MEDIA SERVER icon and press the ENTER button.
3. Disable the connection.
Press the ENTER button to clear the checkmark to disable the connection.
Press the ▼ button to select [OK] and press the ENTER button to close the MEDIA SERVER setting...](http://img.usermanuals.tech/thumb/54/92625/w64_nec-p350x-manual_d-93.png "Page 94
76
4. Using the Viewer
Disconnecting the projector from the media server
1. Display the OPTIONS menu.
Press the ▼ button to select the [OPTIONS] icon and select the ENTER button.
2. Display the MEDIA SERVER setting screen.
Press the ▼ button to select the MEDIA SERVER icon and press the ENTER button.
3. Disable the connection.
Press the ENTER button to clear the checkmark to disable the connection.
Press the ▼ button to select [OK] and press the ENTER button to close the MEDIA SERVER setting...")
73 4. Using the Viewer 3. Select “Share my media” check box, and then select OK. A list of accessible devices will be displayed. 4. Select “P420 Series” and then “Allow”. A check mark will be added to the “P420 Series” icon. • The “P420 Series” is a projector name specified in [NETWORK SETTINGS]. 5. Select “OK”. This will make pictures and video in “Library” available from the projector.
74 4. Using the Viewer Setting up “Media Sharing” in Windows Media Player 12 1. Start Windows Media Player 12. 2. Select “Stream”, and then select “Automatically allow devices to play my media”. The “Allow All Media Devices” windows will be displayed. 3. Select “Automatically allow all computers and media devices”. Graphics and movie files in “Library” can be used from the projector.
75 4. Using the Viewer Connecting the projector to the media server Press the VIEWER button on the remote control. The VIEWER will start. • Another way to start the VIEWER is to press the SOURCE button a few times on the projector cabinet. (→ page 16) • This will start searching for a computer with “media sharing” enabled in the network and add it to the “Media server” of the thumbnail screen. Another way to do this is to point the cursor to “Media server” and select [REFRESH] from the thumbnail menu and press the ENTER button. NOTE: • Up to four accessible media servers can be automatically searched and displayed. The fifth device or later cannot be displayed. (→ page 56)
76 4. Using the Viewer Disconnecting the projector from the media server 1. Display the OPTIONS menu. Press the ▼ button to select the [OPTIONS] icon and select the ENTER button. 2. Display the MEDIA SERVER setting screen. Press the ▼ button to select the MEDIA SERVER icon and press the ENTER button. 3. Disable the connection. Press the ENTER button to clear the checkmark to disable the connection. Press the ▼ button to select [OK] and press the ENTER button to close the MEDIA SERVER setting screen.
77 4. Using the Viewer ❻ Restrictions on displaying files The Viewer allows you to give a simplified display of a PowerPoint file or PDF file. Due to simplified display, however, actual display may be different from the one on your computer application pro- gram. Some restrictions on PowerPoint files • Fonts will be automatically converted to the fonts installed in the projector. Fonts can vary in size or width, causing layout corruption Some characters or fonts may not be displayed. • Some functions included in font are not supported. Example: There are some restrictions on animation, selection, or hyperlink. • It may take longer time to feed pages compared with a computer • In some cases Microsoft PowerPoint 97-2003 format files may not be displayed. Some restrictions on PDF files • Fonts not embedded at the time of PDF creation may not be displayed. • Some functions included in font are not supported. Example: There are some restrictions on annotations, selection, form, or color space. • It may take longer time to feed pages compared with a computer • In some cases Adobe Acrobat format files may not be displayed.
78 5. Using On-Screen Menu 1 Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, , in the bottom show available buttons for your operation. 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab. 4. Use the buttons on the remote control or the projector cabinet to select the item you want to adjust or set. You can use the buttons on the remote control or the projector cabinet to select the tab you want. 5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window. 6. Adjust the level or turn the selected item on or off by using the buttons on the remote control or the projector cabinet. Changes are stored until adjusted again. 7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projec- tor cabinet to quit the menu display. NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings. 8. Press the MENU button to close the menu. To return to the previous menu, press the EXIT button.
79 5. Using On-Screen Menu Menu Elements Slide barSolid triangleTab Radio button High Altitude symbol ECO mode symbol Wireless symbol Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item� Solid triangle ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� Tab ��������������������������������������Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front� Radio button �����������������������Use this round button to select an option in a dialog box� Source ��������������������������������Indicates the currently selected source� Off Timer remaining time ����Indicates the remaining countdown time when the [OFF TIMER] is preset� Slide bar �����������������������������Indicates settings or the direction of adjustment� ECO mode symbol ��������������Indicates ECO MODE is set� Key Lock symbol ����������������Indicates the [CONTROL PANEL LOCK] is enabled� Thermometer symbol ���������Indicates the [ECO MODE] is forcibly set to [ON] mode because the internal temperature is too high� High Altitude symbol ����������Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode� Wireless symbol �����������������Indicate the wireless LAN connection is enabled� Source Available buttons Thermometer symbol Key Lock symbol Off Timer remaining time Highlight
80 5. Using On-Screen Menu List of Menu Items Some menu items are not available depending on the input source. Menu ItemDefaultOptions SOURCE COMPUTER1 * COMPUTER2 * HDMI * VIDEO * S-VIDEO * VIEWER * NETWORK * USB DISPLAY* ADJUST PICTUREPRESET *1–7 DETAIL SETTINGS GENERAL REFERENCE * HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM.GAMMA CORRECTION*1DYNAMIC, NATURAL, BLACK DETAIL SCREEN SIZE*2*LARGE, MEDIUM, SMALLCOLOR TEMPERATURE*5000, 6500, 7800, 8500, 9300, 10500 DYNAMIC CONTRAST*OFF, ON IMAGE MODE*STILL, MOVIEWHITE BALANCECONTRAST R0CONTRAST G0CONTRAST B0BRIGHTNESS R0BRIGHTNESS G0BRIGHTNESS B0 CONTRAST BRIGHTNESS SHARPNESS COLOR* 1HUE RESET IMAGE OPTIONS CLOCK * PHASE * HORIZONTAL * VERTICAL * OVERSCAN *0[%], 5[%], 10[%] ASPECT RATIO*P420X/P350X: AUTO, 4:3, 16:9, 15:9, 16:10, WIDE ZOOM, NATIVE *P350W: AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVEPOSITION 0(Not available on P350W)AUDIOVOLUME 110 - 31 SETUP GENERALKEYSTONE 0 KEYSTONE SAVEOFFOFF, ON WALL COLOROFFOFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINKECO MODEAUTO ECOOFF, AUTO ECO, ECO1, ECO2*3 CLOSED CAPTIONOFFOFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3, TEXT4OFF TIMEROFFOFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00 LANGUAGE ENGLISH ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMINORSK, TÜRKÇE, РУССКИЙ, , Ελληνικά, 中文, 한국어 ROMÂNĂ, HRVATSKA, БЪЛГАРСКИ, INDONESIA, हिन्दी, ไทย MENU COLOR SELECTCOLORCOLOR, MONOCHROMESOURCE DISPLAYONOFF, ONID DISPLAYONOFF, ONECO MESSAGEOFFOFF, ONDISPLAY TIMEAUTO 45 SECMANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SECBACKGROUND BLUEBLUE, BLACK, LOGOFILTER MESSAGEOFFOFF, 100[H], 500[H], 1000[H], 2000[H] * The asterisk (*) indicates that the default setting varies depending on the signal.*1 The [GAMMA CORRECTION] item is available when an item other than [DICOM SIM.] is selected for [REFERENCE].*2 The [SCREEN SIZE] item is available when [DICOM SIM.] is selected for [REFERENCE].*3 [ECO2] is available on P350X only. • Basic menu items are indicated by shaded area.
81 5. Using On-Screen Menu SETUP INSTALLATIONORIENTATION DESKTOP FRONTDESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONTCONTROL PANEL LOCKOFFOFF, ONSECURITY OFFOFF, ONCOMMUNICATION SPEED38400bps4800bps, 9600bps, 19200bps, 38400bpsREMOTE SENSORFRONT/BACKFRONT/BACK, FRONT, BACK CONTROL IDCONTROL ID NUMBER1 1–254CONTROL IDOFFOFF, ONTEST PATTERN NETWORK SETTINGSWIRED LAN, WIRELESS LAN, WPS, NETWORK INFORMATION, PROJECTOR NAME, DOMAIN, ALERT MAIL, NETWORK SERVICE OPTIONS(1) AUTO ADJUSTNORMALOFF, NORMAL, FINEFAN MODEAUTOAUTO, HIGH, HIGH ALTITUDE SIGNAL SELECT COMPUTER1 RGB/ COMPONENTRGB/COMPONENT, RGB, COMPONENT COMPUTER2 RGB/ COMPONENTRGB/COMPONENT, RGB, COMPONENT VIDEO AUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM S-VIDEO AUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM WXGA MODEP420X/P350X: OFF P350W: ONOFF, ON DEINTERLACE ONOFF, ON HDMI SETTINGSVIDEO LEVELAUTOAUTO, NORMAL, ENHANCEDAUDIO SELECTHDMIHDMI, COMPUTER2BEEPONOFF, ON TOOLSADMINISTRATOR MODE, PROGRAM TIMER, TIME, MOUSE OPTIONS(2)STANDBY MODENORMALNORMAL, POWER-SAVINGAUTO POWER ON(AC)OFFOFF, ONAUTO POWER ON(COMP1)OFFOFF, ONAUTO POWER OFFOFFOFF, 0:05, 0:10, 0:20, 0:30 DEFAULT SOURCE SELECTLASTLAST, AUTO, COMPUTER1, COMPUTER2, HDMI, VIDEO, S-VIDEO, VIEWER, NETWORK, USB DISPLAY INFO. USAGE TIME LAMP LIFE REMAININGLAMP HOURS USEDFILTER HOURS USEDTOTAL CARBON SAVINGS SOURCE SOURCE NAMESOURCE INDEXHORIZONTAL FREQUENCYVERTICAL FREQUENCYSIGNAL TYPEVIDEO TYPESYNC TYPESYNC POLARITYSCAN TYPE WIRED LAN IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESS WIRELESS LAN IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESSSSIDNETWORK TYPEWEP/WPA CHANNEL SIGNAL LEVEL VERSION (1)FIRMWARE D ATA VERSION (2)FIRMWARE2 OTHERSPROJECTOR NAMEMODEL NO.SERIAL NUMBERLAN UNIT TYPECONTROL ID (when [CONTROL ID] is set) RESET CURRENT SIGNALALL DATACLEAR LAMP HOURSCLEAR FILTER HOURS * The asterisk (*) indicates that the default setting varies depending on the signal.
82 5. Using On-Screen Menu Menu Descriptions & Functions [SOURCE] COMPUTER 1 and 2 Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal. NOTE: When the component input signal is connected to the COMPUTER 1 IN or COMPUTER 2 IN connector, select [COMPUTER1] or [COMPUTER2] respectively. The projector automatically determines whether the COMPUTER1 or 2 input signal is an RGB or component signal. HDMI Selects the HDMI compatible equipment connected to your HDMI IN connector. VIDEO Selects what is connected to your VIDEO input-VCR, DVD player or document camera. S-VIDEO Selects what is connected to your S-VIDEO input-VCR or DVD player. NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S- Video source. VIEWER This feature enables you to make presentations using a USB memory that contains slides. (→ page 52 “4. Using the Viewer”) NETWORK Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit (optional for models for Europe, Australia, Asia and other countries than North America). USB DISPLAY Selects the computer connected to the USB(PC) port (type B) by using a commercially available USB cable. (→ page 34)