NEC P350x Projector User Manual

							123
5. Using On-Screen Menu
TOOLS
ADMINISTRATOR MODE
This	allows	you	to	select	MENU	MODE,	save	settings,	and	set	a	password	for	the	administrator	mode.
MENU	MODESelect	either	[BASIC]	or	[ADVANCED]	menu.
(→	page	80)—
NOT	SAVE	SETTING	
VALUES
Placing a check mark will not save your projector settings�
Clear this check box to save your projector settings�
—
NEW	PASSWORD/
CONFIRM	PASS-
WORD
Assign	a	password	for	the	administrator	mode.Up	to	10	alphanumeric	
characters
TIP:
To	return	to	the	ADVANCED	menu	from	the	BASIC	menu,	do	the	following:
1.	 Use	 the	SOURCE	 button	on	the	 cabinet	 or	press	 the	NETWORK	 button	on	the	 remote	 control	 to	select	
[NETWORK]	to	display	the	APPLICATION	MENU.
2.	 Select	[TOOLS]	→	[ADMINISTRATOR	MODE]	→	[MENU	MODE]	→	[ADVANCED	MODE]. 	 
						

							124
5. Using On-Screen Menu
PROGRAM TIMER
This	option	 turns	on/off	 the	projector	 and	changes	 video	signals,	 and	selects	 ECO	mode	 automatically	 at	a	specified	
time.
NOTE:
•	 Before	using	[PROGRAM	TIMER],	make	sure	that	the	[DATE	AND	TIME]	feature	is	set.	(→	page	127)
•	 Make	sure	that	the	projector	is	in	the	stand	by	condition	with	the	POWER	cord	connected.
•	 The	 projector	 has	a	built-in	 clock.	The	clock	 will	keep	 working	 for	about	 two	weeks	 after	the	main	 power	 is	turned	 off.	If	the	 main	
power	is	not	supplied	to	the	projector	for	two	weeks	or	more,	the	built-in	clock	stops	working.
Setting a new program timer
1.	 On 	the 	PROGRAM 	TIMER 	screen, 	use 	the 	SELECT 	▲ or  ▼	button 	to 	select 	[SETTINGS]	 and	press 	the 	ENTER	
button.
  The [PROGRAM LIST] screen will be displayed.
2.	 Select	a	blank	program	number	and	press	the	ENTER	button.
 The [EDIT] screen will be displayed.
3.	 Make	settings	for	each	item	as	required.
ACTIVE ������������������Place a check mark to enable the program�
DAY ������������������������Select days of the week for the program timer � To execute the program from Monday to Friday, select [MON-
FRI]�To execute the program in everyday basis, select [EVERYDAY]� 
						

							125
5. Using On-Screen Menu
TIME ����������������������Set the time to execute the program� Enter time in 24-hour format�
FUNCTION  �������������Select  a  function  to  be  executed�  Selecting  [POWER]  will  allow  you  to  turn  on  or  off  the  projector  by 
setting  [ADVANCED  SETTINGS]�  Selecting  [SOURCE]  will  allow  you  to  select  a  video  source  by  setting 
[ADVANCED SETTINGS]� Selecting [ECO MODE] will allow you to select [EC MODE] by setting [ADVANCED 
SETTINGS]�
ADVANCED SETTINGS
 ������������������������������Select power on/off, a type of video source, or ECO MODE for the selected item in [FUNCTION]�
REPEAT ������������������Place a check mark to repeat the program continuing basis� To use the program this week only, clear the 
check mark�
4.	 Select	[OK]	and	press	the	ENTER	button.
  This will complete the settings.
 You will be returned to the [PROGRAM LIST] screen.
5.	 Select	[BACK]	and	press	the	ENTER	button.
 You will be returned to the [PROGRAM TIMER] screen.
6.	 Select	[OK]	and	press	the	ENTER	button.
 You will be returned to the [TOOLS] screen.
NOTE:
•	 Up	to	30	different	timer	settings	can	be	programmed.
•	 When	[PROGRAM	TIMER]	is	turned	on,	the	[STANDBY	MODE]	setting	is	ignored.
•	 The	Program	Timer	is	executed	on	a	set	time	basis,	not	in	a	program	basis.
•	 Once	 the	program	 not	marked	 with	a	check	 in	[REPEAT]	 has	been	 executed,	 the	check	 mark	in	the	 [ACTIVE]	 check	box	will	be	
cleared	automatically	and	the	program	will	be	disabled.
•	 When	the	on-time	and	the	off-time	set	for	the	same	time,	the	off-time	setting	will	take	preference.
•	 Two	different	sources	are	set	for	the	same	time,	the	larger	program	number	will	take	preference.	
•	 The	on-time	setting	will	not	be	executed	while	the	cooling	fans	are	running	or 	an	error	is	occurring.
•	 If	the 	off-time 	setting 	is 	expired 	under 	the 	condition 	in 	which 	the 	power 	off 	is 	not 	possible, 	the 	off-timer 	setting 	will 	not 	be 	executed	
until	the	power	off	becomes	possible.
•	 Programs	 not	marked	 with	a	check	 mark	in	[ACTIVE]	 of	the	 [EDIT]	 screen	 will	not	be	executed	 even	if	the	 Program	 Timer	is	
enabled.
•	 When	 the	projector	 is	turned	 on	by	using	 the	program	 timer	and	if	you	 want	 to	turn	 off	the	 projector,	 set	the	 off-time	 or	do	 it	
manually	so	as	not	to	leave	the	projector	on	for	a	long	period	of	time. 
						

							126
5. Using On-Screen Menu
Activating the program timer
1.	 Select	[ENABLE]	on	the	[PROGRAM	TIMER]	screen	and	press	the	ENTER	button.
 The [ENABLE] will be activated.
2.	 Select	[OK]	and	press	the	ENTER	button.
 The [PROGRAM TIMER] screen will be changed to the [TOOL] screen.
NOTE:
•	 Clearing	 [ENABLE]	will	disable	 the	Program	 Timer	even	when	 a	program	 is	marked	 with	a	check	 mark	on	[PROGRAM	 LIST]	
screen.	
•	 When	[ENABLE] 	is 	selected, 	the 	[PROGRAM 	LIST] 	cannot 	be 	edited. 	To 	edit 	the 	programs, 	select 	[ENABLE] 	to 	turn 	off 	the 	Program	
Timer.
Changing the programmed settings
1.	 On	the	[PROGRAM	LIST]	screen, 	select	a	program	you	want	to	edit	and	press	the	ENTER	button.
2.	 Change	the	settings	on	the	[EDIT]	screen.
3.	 Select	[OK]	and	press	the	ENTER	button.
 The programmed settings will be changed.
 You will be returned to the [PROGRAM LIST] screen.
Changing the order of programs
1.	 On	 the	[PROGRAM	 LIST]	screen, 	select	 a	program	 whose	order	you	want	 to	change	 and	press	 the	SELECT	
▶ button.
2.	 Press	the	SELECT	▼ button to select ▲ or ▼.
3.	 Press	the	ENTER	button	a	few	times	to	select	a	row	to	which	you	wish	to	move	the	program.
 The order of the programs will be changed.
Deleting the programs
1.	 On	 the	[PROGRAM	 LIST]	screen, 	select	 a	program	 number	you	want	 to	delete	 and	press	 the	SELECT	▶ 
button.
2.	 Press	the	SELECT	▼	button	to	select	[DELETE].
3.	 Press	the	ENTER	button.
  The confirmation screen will be displayed.
4.	 Select	[YES]	and	press	the	ENTER	button.
 The program will be deleted.
This will complete deleting the program. 
						

							127
5. Using On-Screen Menu
DATE ANDTIME
You	can	set	the	current	time,	month,	date,	and	year.
NOTE:	The	projector	 has	a	built-in	 clock.	The	clock	 will	keep	 working	 for	about	 2	weeks	 after	the	main	 power	 is	turned	 off.	If	the	
main	 power	 is	off	 for	 2	weeks	 or	more,	 the	built-in	 clock	will	cease.	 If	the	 built-in	 clock	ceases,	 set	the	 date	 and	time	 again.	 The	
built-in	clock	will	not	cease	while	in	the	standby	mode.
TIME ZONE SETTINGS ��������������Select your time zone�
DATE AND TIME SETTINGS  ������Set your current date (MM/DD/YYYY) and time (HH:MM)� 
INTERNET TIME SERVER  ���������If you place a check mark, the projector’s built-in clock will be synchronized with an Internet 
time server in every 24 hours and at the time of projector’s startup�
UPDATE ������������������������������������Synchronizes  the  projector’s  built-in  clock  immediately �  The  UPDATE  button  is  not  available 
unless the INTERNET TIME SERVER check box is turned on�
SUMMER TIME SETTINGS �������If you place a check mark, the clock for daylight saving will be enabled\
�
MOUSE
This	 option	 lets	you	 to	change	 your	USB	 mouse	 settings. 	The	 mouse	 settings	 feature	is	available	 for	USB	 mouse	 only.	
Choose	the	settings	you	want:
MOUSE BUTTON ����������������������[RIGHT HAND] or [LEFT HAND]
MOUSE SENSITIVITY
  ���������������[FAST], [MEDIUM] or [SLOW] 
						

							128
6. Installation and Connections
32
1
This	section	describes	how	to	set	up	your	projector	and	how	to	connect	video	and	audio	sources.
Your	projector	is	simple	to	set	up	and	use.	But	before	you	get	started,	you	must	first:
z	 Set	up	a	screen	and	the	projector.
x	 Connect	your	computer	 or	video	 equipment	
to	the	projector.
	(→	page	132, 134, 135, 136, 137, 138)
c
	 Connect	 the	supplied	 power	cord. 
(→
	page	13)
NOTE:	
•	 Ensure	 that	the	power	 cord	and	any	other	 cables	 are	
disconnected 	before 	moving 	the 	projector. 	When	
moving	 the	projector	 or	when	 it	is	 not	 in	use,	 cover	
the	lens	with	the	sliding	lens	cover.
•	 An	 optional	 cable	cover	 (NP01CV)	 is	available.	 Refer	
to	page	142	for	attaching	the	cable	cover.
1 Setting Up the Screen and the Projector
Selecting a Location
[P420X/P350X]
The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	
approximately	 25"	(0.64	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 35	inches	 (0.9	m)	from	 the	wall	 or	
screen. 	The	 largest	 the	image	 can	be	is	300"	 (7.6	m)	when	 the	projector	 is	about	 435	inches	 (11.0	m)	from	 the	wall	
or	screen.
300
240
Distance 
(Unit:  m/inch)
Lens center Screen Size
Screen Size (Unit: cm/inch)
200
180
150
120
100
80
11.0/4358.8/348
6.6/260
5.5/216
4.4/173
3.6/1442.9/1152.2/861.4/57
40
7.3/289
60
3025
1.1/
420.9/35
609.6(W)�457.2(H) / 240(W)�180(H)
487.7(W)�365.8(H) / 192(W)�144(H)
406.4(W)�304.8(H) / 160(W)�120(H)
304.8(W)�228.6(H) / 120(W)�90(H)
365.8(W)�274.3(H) / 144(W)�108(H)
243.8(W)�182.9(H) / 96(W)�72(H)
203.2(W)�152.4(H) / 80(W)�60(H)
162.6(W)�121.9(H) / 64(W)�48(H)
121.9(W)�91.4(H) / 48(W)�36(H)
81.3(W)�61.0(H) / 32(W)�24(H)
61.0(W)�45.7(H) / 24(W)�18(H)
50.8(W)�38.1(H) / 20(W)�15(H)
TIP:
•	 The	distances	are	indicated	by	intermediate	values	between	tele	and	wide.	Use	as	a	rule	of	thumb.
•	 For	more	details	on	throw	distance,	see	page	130.
To the wall outlet. 
						

							129
6. Installation and Connections
[P350W]
The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	
approximately	 25"	(0.64	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 37	inches	 (0.9	m)	from	 the	wall	 or	
screen. 	The	 largest	 the	image	 can	be	is	300"	 (7.6	m)	when	 the	projector	 is	about	 459	inches	 (11.7	m)	from	 the	wall	
or	screen.
300
240
Distance 
(Unit:  m/inch)
Lens center Screen Size
Screen Size (Unit: cm/inch)
200
180
150
120
100
80
11.7/4599.3/367
7.0/275
5.8/229
4.6/183
3.9/1523.1/1212.3/901.5/60
40
7.8/306
60
3025
1.1/
450.9/37
646.2(W)�403.9(H) / 254(W)�159(H)
516.9(W)�323.1(H) / 204(W)�127(H)
430.8(W)�269.2(H) / 170(W)�106(H)
323.1(W)�201.9(H) / 127(W)�79(H)
387.7(W)�242.3(H) / 153(W)�95(H)
258.5(W)�161.5(H) / 102(W)�64(H)
215.4(W)�134.6(H) / 85(W)�53(H)
172.3(W)�107.7(H) / 68(W)�42(H)
129.2(W)�80.8(H) / 51(W)�32(H)
86.2(W)�53.8(H) / 34(W)�21(H)
64.6(W)�40.4(H) / 25(W)�16(H)
53.8(W)�33.7(H) / 21(W)�13(H)
TIP:
•	 The	distances	are	indicated	by	intermediate	values	between	tele	and	wide.	Use	as	a	rule	of	thumb.
•	 For	more	details	on	throw	distance,	see	page	130. 
						

							130
6. Installation and Connections
C
α B
D
Throw Distance and Screen Size
The	
following	 shows	the	proper	 relative	 positions	 of	the	 projector	 and	screen. 	Refer	 to	the	 table	 to	determine	 the	
position	of	installation.
Distance Chart
B	=	 Ver tical 	distance 	between 	lens 	center 	and	
screen	center
C	=	 Throw	distance
D	=	 Ver tical 	distance 	between 	lens 	center 	and	
screen	 bottom	 (top	of	screen	 for	ceiling	 ap-
plication)
α
	=	 Throw	angle
NOTE:	 The	values	 in	the	 tables	 are	design	 values	and	
may	vary.
[P420X/P350X]
Screen SizeB C
Dα
Diagonal WidthHeight widetele widetele
inch mminch mminch mminch mminch mm-inch mminch mmdegree -degree
25 635 20508 15381 0–80–191 25 643  -43 1102 -8–0-191–0
0�0–16�5-0�0–9�830762 24610 18457 0–90–229 31 782  -52 1333 -9–0-229–00�0–16�3-0�0–9�7401016 32813 24610 0–12 0–305 42 1060  -71 1794 -12–0 -305–00�0–16�0-0�0–9�6601524 481219 36914 0–18 0–457 64 1616  -107  2717 -18–0 -457–00�0–15�8-0�0–9�6721829 581463 431097 0–220–549 77 1950  -129  3271 -22–0 -549–00�0–15�7-0�0–9�5802032 641626 481219 0–240–610 86 2172  -143  3641 -24–0 -610–00�0–15�7-0�0–9�5842134 671707 501280 0–250–640 90 2284  -151  3825 -25–0 -640–00�0–15�7-0�0–9�5902286 721829 541372 0–270–686 96 2450  -161  4102 -27–0 -686–00�0–15�6-0�0–9�51002540 802032 601524 0–300–762 107 2728  -180  4564 -30–0 -762–00�0–15�6-0�0–9�51203048 962438 721829 0–360–914 129 3285  -216  5487 -36–0 -914–00�0–15�6-0�0–9�51503810 1203048 902286 0–450–1143 162 4119  -271  6872 -45–0 -1143–00�0–15�5-0�0–9�41804572 1443658 1082743 0–540–1372 195 4953  -325  8256 -54–0 -1372–00�0–15�5-0�0–9�42005080 1604064 1203048 0–600–1524 217 5509  -361  9180 -60–0 -1524–00�0–15�5-0�0–9�42105334 1684267 1263200 0–630–1600 228 5787  -380  9641 -63–0 -1600–00�0–15�5-0�0–9�42406096 1924877 1443658 0–720–1829 261 6621  -434  11026 -72–0-1829–00�0–15�4-0�0–9�42706858 2165486 1624115 0–810–2057 294 7456  -489  12411 -81–0-2057–00�0–15�4-0�0–9�43007620 2406096 1804572 0–900–2286 326 8290  -543  13795 -90–0-2286–00�0–15�4-0�0–9�4
[P350W]
Screen SizeB C
Dα
Diagonal WidthHeight widetele widetele
inch mminch mminch mminch mminch mm-inch mminch mmdegree -degree
25 635 21538 13337 0–80–202 27 682  -46 1167 -7–1-168–34
0�0–16�5-0�0–9�830762 25646 16404 0–10 0–242 33 829  -56 1411 -8–2-202–400�0–16�3-0�0–9�7401016 34862 21538 0–13 0–323 44 1123  -75 1898 -11–2 -269–540�0–16�1-0�0–9�7601524 511292 32808 0–19 0–485 67 1710  -113  2873 -16–3 -404–810�0–15�8-0�0–9�6721829 611551 38969 0–23 0–582 81 2063  -136  3458 -19–4 -485–970�0–15�7-0�0–9�5802032 681723 421077 0–250–646 90 2298  -151  3848 -21–4-538–1080�0–15�7-0�0–9�5842134 711809 451131 0–270–678 95 2415  -159  4043 -22–4-565–1130�0–15�7-0�0–9�5902286 761939 481212 0–290–727 102 2591  -171  4336 -24–5-606–1210�0–15�7-0�0–9�51002540 852154 531346 0–320–808 114 2885  -190  4823 -26–5-673–1350�0–15�6-0�0–9�51203048 1022585 641615 0–380–969 137 3472  -228  5799 -32–6-808–1620�0–15�6-0�0–9�51503810 1273231 792019 0–480–1212 171 4354  -286  7261 -40–8-1010–2020�0–15�6-0�0–9�51804572 1533877 952423 0–570–1454 206 5235  -343  8724 -48–10 -1212–2420�0–15�5-0�0–9�52005080 1704308 1062692 0–640–1615 229 5822  -382  9699 -53–11 -1346–2690�0–15�5-0�0–9�52105334 1784523 1112827 0–670–1696 241 6116  -401  10187 -56–11-1414–2830�0–15�5-0�0–9�52406096 2045169 1273231 0–760–1939 275 6997  -459  11649 -64–13-1615–3230�0–15�5-0�0–9�42706858 2295816 1433635 0–860–2181 310 7878  -516  13112 -72–14-1817–3630�0–15�5-0�0–9�43007620 2546462 1594039 0–950–2423 345 8759  -574  14575 -79–16-2019–4040�0–15�5-0�0–9�4
Screen	center
Lens	center
Screen	bottom 
						

							131
6. Installation and Connections
WARNING
*	 Installing	your	projector	 on	the	 ceiling	 must	be	done	
by	a	qualified	 technician. 	Contact	 your	NEC	 dealer	 for	
more	information.
*	 Do	not	attempt	to	install	the	projector	yourself.
•	 Only	 use	your	 projector	 on	a	solid,	 level	surface. 	If	 the	
projector	 falls	to	the	 ground,	 you	can	 be	injured	 and	
the	projector	severely	damaged.
•	 Do	not 	use 	the 	projector 	where 	temperatures	 vary	
greatly.	The	 projector	 must	be	used	 at	temperatures	
between	 41°F	(5°C)	 and	104°F	 (40°C)	 (Eco	mode	 se-
lected	automatically	at	95°F	to	104°F/35°C	to	40°C).
•	 Do	not 	expose 	the 	projector 	to 	moisture, 	dust, 	or	
smoke. 	This	will	harm	the	screen	image.
•	 Ensure 	that 	you 	have 	adequate 	ventilation 	around 	your	
projector 	so 	heat 	can 	dissipate. 	Do 	not 	cover 	the 	vents	
on	the	side	or	the	front	of	the	projector.
Reflecting the Image
Using	 a	mirror	 to	reflect	 your	projector’s	 image	enables	
you	to	enjoy	 a	much	 larger	 image	 when	a	smaller	 space	
is	required. 	Contact 	your	 NEC	dealer 	if	 you	 need	 a	mirror 	
system. 	If	 you’re	 using	a	mirror	 system	 and	your	 image	
is	inverted,	 use	the	MENU	 and		buttons	 on	your	
projector	 cabinet	or	your	 remote	 control	to	correct	 the	
orientation. 	(→	page	95) 
						

							132
6. Installation and Connections
COMPUTER 1 INAUDIO IN
HDMI IN
USB(PC)
Computer cable (VGA) (supplied)To mini D-Sub 15-pin connector on the 
projector. It is recommended that you use a 
commercially available distribution amplifier 
if connecting a signal cable longer than the 
cable supplied.
A commercially available 
USB cable 
(compatible with USB 2.0 
specifications)
NOTE:	
For	Macintosh,	 use	a	commercially	 avail-
able	pin	adapter	 (not	supplied)	 to	connect	 to	
your	Mac’s	video	port.
Stereo mini-plug 
audio cable (not 
supplied)
 Making Connections
NOTE:	When	using	with	a	notebook	 PC,	be	sure	 to	connect	 the	projector	 and	notebook	 PC	while	 the	projector	 is	in	 standby	 mode	
and	before	turning	on	the	power	to	the	notebook	PC.
In	most	cases	the	output	signal	from	the	notebook	PC	is	not	turned	on	unless	connected	to	the	projector	before	being	powered	up.
*	 If	the	screen	 goes	blank	 while	using	 your	remote	 control,	 it	may	 be	the	 result	 of	the	 computer’s	 screen-saver	 or	power	 manage-
ment	software.
Enabling the computer’s external display
Displaying	an	image	on	the	notebook	PC’s	screen	does	not	necessarily	mean	it	outputs	a	signal	to	the	projector.
When	using	a	PC	compatible	laptop,	a	combination	of	function	keys	will	enable/disable	the	external	display.
Usually,	 the	combination	 of	the	 “Fn” 	key	 along	 with	one	of	the	 12	function	 keys	gets	the	external	 display	to	come	 on	
or	off. 	For	 example,	 NEC	laptops	 use	Fn	+	F3,	 while	 Dell	laptops	 use	Fn	+	F8	 key	 combinations	 to	toggle	 through	
external	display	selections.
Connecting Your Computer
NOTE:	Signals	supported	by	Plug	&	Play	(DDC2)
INPUT
COMPUTER 1 IN COMPUTER 2 IN HDMI
analog analog digital
Yes YesYes
HDMI cable (not supplied)
Use High Speed HDMI® 
Cable.
NOTE:
•	 When	 [VIEWER],	 [NETWORK],	 or	[USB	 DISPLAY]	 is	selected	 for	[SOURCE],	 sound	from	the	COMPUTER	 2	AUDIO	 IN	mini	 jack	
will	be	output	through	the	speaker.