NEC P350x Projector User Manual

153
8. User Supportware
2	 Click	a	software	program	you	wish	to	install	on	the	menu	window.
 The installation will start.
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.
TIP:
Uninstalling a Software Program
Preparation:
Exit	 the	software	 program	before	uninstalling. 	To	 uninstall	 the	software	 program,	 the	Windows	 user	account	 must	have	
“Administrator” 	privilege	(Windows	7	and	 Windows	Vista)	or	“Computer	Administrator” 	privilege	(Windows	XP).
• For Windows...

154
8. User Supportware
Installation for Macintosh software
Image	Express	Utility	2	for	Mac	supports	Mac	OS	X.
1	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.	
 The menu window will be displayed.
2	 Double-click	the	CD-ROM	icon.
3	 Double-click	the	 “Mac	OS	X”	folder.
4	 Double-click	 “Image	Express	Utility	2	(Intel).dmg”.
 The “Image Express Utility 2” folder will be displayed.
•	 If	your	Mac	is	PowerPC-based,	double-click	 “Image	Express	Utility	2.dmg”.
5	 Move	the	“Image...

155
8. User Supportware
  Using  the  Computer  Cable  (VGA)  to  Operate  the  Projector 
(Virtual Remote Tool)
Using	 the	utility	 software	 “Virtual	Remote	 Tool”,	Virtual	 Remote	 screen	(or	toolbar)	 can	be	displayed	 on	your	 computer	
screen.
This	 will	help	 you	perform	 operations	 such	as	projector’s	 power	on	or	off	 and	 signal	 selection	 via	the	 computer	 cable	
(VGA),	serial	cable,	 or	LAN	 connection. 	Only	 via	serial	 or	LAN	 connection	 it	is	 also	 used	 to	send	 an	image	 to	the...

156
8. User Supportware
Step 1: Install Virtual Remote Tool on the computer
NOTE:
•	 To	install	 Virtual	 Remote	 Tool,	the	Windows	 user	account	 must	have	“Administrator”	 privilege	(Windows	 7,	Windows	 Vista	and	
Windows	XP).	
•	 Exit	 all	running	 programs	 before	installing	 Virtual	Remote	 Tool.	If	another	 program	 is	running,	 the	installation	 may	not	be	com-
pleted.	
1	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
  The menu window will be displayed.
TIP:
If	the	menu...

157
8. User Supportware
TIP:
Uninstalling Software Program
Preparation:
Exit	the	software	 program	before	uninstalling. 	To	 uninstall	 the	software	 program,	 the	Windows	 user	account	 must	have	
“Administrator” 	privilege	(Windows	7	and	 Windows	Vista)	or	“Computer	Administrator” 	privilege	(Windows	XP).
• For Windows 7/Windows Vista
1	 Click	“Start”	and	then	 “Control	Panel”.
 The Control Panel window will be displayed.
2	 Click	 “Uninstall	a	program” 	under	“Programs”
 The “Programs and Features”...

158
8. User Supportware
Start Virtual Remote Tool
Start using the shortcut icon
•	 Double-click	the	shortcut	icon		on	the	Windows	Desktop.
Start from the Start menu
•	 Click	 [Start]	→	[All	 Programs]	 or	[Programs]	→	[NEC	 Projector	 User	Supportware]	→	[Virtual	 Remote	 Tool]	
→	[Virtual	Remote	 Tool].
 When Virtual Remote Tool starts for the first time, “Easy Setup” window will be displayed.
 Follow the instructions on the screens
 When “Easy Setup” is completed, the Virtual Remote Tool screen will be...

159
8. User Supportware
Exiting Virtual Remote Tool
1	 Click	the	Virtual	Remote	 Tool	icon		on	the	Taskbar.
 The pop-up menu will be displayed.
2	 Click	 “Exit”.
 The Virtual Remote Tool will be closed.
Viewing the help file of Virtual Remote Tool
• Displaying the help file using the taskbar
1	 Click	the	 Virtual	Remote	 Tool	icon		on	the	taskbar	when	 Virtual	Remote	Tool	is	running.
 The pop-up menu will be displayed.
2.	 Click	 “Help”.
 The Help screen will be displayed.
• Displaying the help file...

160
8. User Supportware
 Projecting Your Computer’s Screen Image from the Projector 
over a LAN (Image Express Utility Lite)
 
Using	 Image	 Express	 Utility	Lite	allows	 you	to	send	 the	computer’s	 screen	image	to	the	 projector	 over	a	USB	 cable	
or	a	wired	or	wireless	LAN.
This	section	 will	show	 you	an	outline	 about	how	to	connect	 the	projector	 to	a	LAN	 and	to	use	 Image	 Express	 Utility	
Lite.	For	the	operation	of	Image	Express	Utility	Lite,	see	the	help	of	Image	Express	Utility	Lite.
What...

161
8. User Supportware
TIP:
If	the	menu	window	will	not	be	displayed,	try	the	following	procedure.
For	Windows	7:
1.	Click	 “start” 	on	Windows.
2.	Click	 “All	Programs” 	→	“Accessories” 	→	“Run”.
3.	 Type 	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	in 	“Name”. 	(example: 	Q:\LAUNCH-
ER.EXE)
4.	 Click	 “OK”.
 The menu window will be displayed.
2.	 Click	a	software	program	on	the	menu	window.
 The installation will start.
•	 Follow	the	instructions	on	the	installer	screens	to...

162
8. User Supportware
3.	 Select	the	projector	you	wish	to	connect,	and	click	“Connect”.
 The target selection window will be displayed.
4.	 Place	a	check	mark	for	projectors	to	be	connected, 	and	then	click	“Connect”.
•	 When	one	or	more	 projectors	 are	displayed,	 from	the	menu	 on	the	 projector,	 select	[INFO.]	→ [WIRELESS LAN] 
→ [IP ADDRESS].
  When connecting with the projector is establised, you can operate the control window to control the projector. (→ 
page 35)
NOTE:
•	 When	 [POWER-SAVING]...