NEC P350x Projector User Manual

183
8. User Supportware

  (cut-off icon) �������Disconnects communication with the computer �
  (Shift icon) ����������When the highlight is moved to this icon and the ENTER button is pressed, shift lock status is set� 
The  shift  lock  is  canceled  if  the  highlight  is  moved  to  this  icon  and  the  ENTER  button  is  pressed 
again�
  (Ctrl icon) ������������When the highlight is moved to this icon and the ENTER button is pressed, control lock status is set� 
The control lock is canceled if the...

184
8. User Supportware
• Operating the projector (exiting Desktop Control Utility 1.0)
1	 Click	the	projector	icon	[]	on	the	taskbar	while	the	desktop	screen	is	displayed.
2	 Click	[Exit].
	 Desktop	Control	Utility	1.0	will	be	terminated.
3	 Press	the	EXIT	button	on	the	projector	unit	or	on	the	remote	control.
	 The	“network	menu” 	screen	will	be	displayed.
4	 Press	the	MENU	button	on	the	projector	unit	or	on	the	remote	control.
 The on-screen menu will be displayed.
5	 Select	an	input	source	other	than...

185
8. User Supportware
 Controlling the Projector over a LAN (PC Control Utility Pro 4)
Using	the	utility	software	“PC	Control	Utility	Pro	4”,	the	projector	can	be	controlled	from	a	computer	over	a	LAN.
Control Functions
Power	On/Off,	 signal	selection,	 picture	freeze,	 picture	mute,	audio	mute,	 adjusting,	 error	message	 notification,	 event	
schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	 provides	 an	outline	 of	preparation	 for	use	 of	PC	 Control	 Utility	Pro	4.	For	 information	 on...

186
8. User Supportware
 Converting PowerPoint files to Slides (Viewer PPT Converter 
3.0)
Using	 Viewer	 PPT	Converter	 3.0	allows	 you	to	convert	 PowerPoint	 files	into	JPEG	 files.	Converted	 JPEG	files	and	
Index	 files	(.idx)	 can	be	saved	 to	a	USB	 memory. 	When	 the	USB	 memory	 inserted	into	the	projector,	 these	JPEG	 files	
and	Index	files	(.idx)	can	be	displayed	with	the	viewer	function	of	the	projector	without	connecting	a	computer.
NOTE:
When	Viewer	 PPT	Converter	 3.0	has	 been...

187
8. User Supportware
5.	 Select	the	USB	memory	drive	for	“Card	Drive”	and	type	in	“Index	name”.
 Index name must be eight alphanumeric characters or less. 2-byte character and file with a long filename cannot 
be used.
6.	 Click	 “Export”.
 A confirmation message will be displayed.
7.	 Click	 “OK”.
 Exporting a file will start.
8.	 Click	 “OK”.
9.	 Click	“Exit”.
 Viewer PPT Converter 3.0 will exit.
10. 	Remove	the	USB	memory	from	the	computer.
NOTE:
•	 Before	 removing	 the	USB	 memory	 from	the	USB...

188
8. User Supportware
 Projecting Your Mac’s Screen Image from the Projector over 
a LAN (Image Express Utility 2 for Mac)
Using	Image	 Express	 Utility	2	for	 Mac	 contained	 allows	you	to	send	 the	Mac’s	 screen	 image	to	the	 projector	 over	a	
network	(wired	or	wireless	LAN).
Image	Express	Utility	2	for	Mac	runs	on	Mac	OS	X	10.2.8	or	later.
It	runs	on	both	Mac	OS	X	(PowerPC)	and	Mac	OS	X	(Intel).
Hereafter,	 “Image	Express	Utility	2	for	Mac” 	is	abbreviated	as	“Image	Express	Utility	2”.
What you...

189
8. User Supportware
Using Image Express Utility 2
Connecting to a projector
1	 Confirm	that	the	projector	has	been	turned	on.
2	 Click	the	AirPort	status	(		)	on	the	Macintosh	menu	bar,	and	click	“Turn	AirPort	On”.
 The AirPort status is changed to “  ” or “  ”.
•	 AirPort	status	types	and	meanings
 ...AirPort : Off
 ...AirPort : On ( in infrastructure connection )
 ...AirPort : On ( in adhoc connection )
REFERENCE:
When the AirPort status (  /  /  ) is not displayed on the menu bar:
1	 Click	Apple...

190
8. User Supportware
3	 Double-click	the	“Image	Express	Utility	2” 	icon	in	the	“Image	Express	Utility	2” 	folder.
•	 At	the	initial	start,	the	“License	Agreement”	window	is	displayed. 	
	 Thoroughly	read	the	agreement	 shown	on	the	 screen,	 and	click	 “I	accept	 the	terms	 in	the	 license	 agreement” 	
and the [OK] button.
 Next, the “Authenticate” window will be displayed.
4	 Enter	the	administrator	name	and	password	of	your	Macintosh	computer, 	and	click	the	[OK]	button.
 The [Projector Selection]...

191
8. User Supportware
Stopping/Restarting Image Transmission
• Stopping image transmission
1	 Click	[Tools]	on	the	menu	bar,	and	click	[Stop	Sending].
 Image transmission is temporarily stopped.
• Restarting image transmission
1	 Click	[Tools]	on	the	menu	bar, 	and	click	[Start	Sending].
 Image transmission is started again.
Exiting Image Express Utility 2
1	 Click	[Image	Express	Utility	2]	on	the	menu	bar, 	and	click	[Quit	Image	Express	Utility	2].
 Image Express Utility 2 is exited. 

192
9. Appendix
1 Troubleshooting
This	section	helps	you	resolve	problems	you	may	encounter	while	setting	up	or	using	the	projector.
Indicator Messages
Power Indicator
Indicator ConditionProjector ConditionNote
Off The main power is off –
Blinking light Blue
0�5 sec On,0�5 sec OffThe projector is getting ready to turn on�Wait for a moment�
2�5 sec On,0�5 sec OffOff Timer is enabled�	–
Steady lightBlueThe projector is turned on�–
Orange [NORMAL] is selected for [STANDBY MODE] –
Red [POWER-SAVING]  is...