NEC P350x Projector User Manual

103
5. Using On-Screen Menu
[VERSION(1)]
[FIRMWARE]	Version
[DATA]	Version
[VERSION(2)]
[FIRMWARE2]	 Version
[OTHERS]
[PROJECTOR	NAME]
[MODEL	NO.]
[SERIAL	NUMBER]
[LAN	UNIT	TYPE]
[CONTROL	ID]	(when	[CONTROL	ID]	is	set) 

104
5. Using On-Screen Menu
 Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The	RESET	 feature	allows	you	to	change	 adjustments	 and	settings	 to	the	 factory	 preset	for	a	(all)	 source	 (s)	except	
the	following:
[CURRENT	SIGNAL]
Resets	the	adjustments	for	the	current	signal	to	the	factory	preset	levels. 	
The	items	 that	can	be	reset	 are:	[PRESET],	 [CONTRAST],	 [BRIGHTNESS],	 [COLOR],	[HUE],	[SHARPNESS],	
[ASPECT	RATIO],	[HORIZONTAL],	[VERTICAL],	[CLOCK],	[PHASE],	and...

105
5. Using On-Screen Menu
❾ Application Menu
When	[NETWORK]	 is	selected	 from	the	[SOURCE]	 menu,	the	application	 menu	[APPLICATION	 MENU]	will	be	dis-
played.
The	 application	 menu	allows	 you	to	set	 up	the	 User	 Supportware,	 Network	Settings	(NETWORK	 SETTINGS)	and	
Tools	(TOOLS).
The	User	Supportware	is	contained	on	the	supplied	NEC	Projector	CD-ROM.
In	[ADMINISTRATOR	MODE],	either	[ADVANCED]	menu	or	[BASIC]	menu	can	be	selected. 	(→	page	123)
The	[BASIC]	menu	contains	minimum	essentials	of...

106
5. Using On-Screen Menu
NETWORK PROJECTOR
This	shows	 information 	for	 projector 	name,	 resolution, 	and	 network 	(wired/wireless) 	which 	are	 required 	to	 use	 Network	
Projector.
Use	this	information	to	set	up	for	your	computer.
REMOTE DESKTOP CONNECTION
This	allows	you	to	set	up	for	computer	name	entry	and	effects	for	Remote	Desktop.
NOTE:
•	 A	USB	keyboard	is	required	to	set	up	the	Remote	Desktop	Connection. 

107
5. Using On-Screen Menu
NETWORK SETTINGS
Important:
•	 Consult	with	your	network	administrator	about	these	settings.
•	 When	using	a	wired	 LAN	connection,	 connect	a	LAN	 cable	 (Ethernet	 cable)	to	the	 LAN	 port	(RJ-45)	 of	the	 projector.	 (→	page	
138)	
TIP:	The	network	settings	you	make	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
Hints on How to Set Up LAN Connection 
To set up the projector for a LAN connection:
Select	[WIRED	LAN]	or	[WIRELESS	LAN]	→	[PROFILES]	→	[PROFILE	1]...

108
5. Using On-Screen Menu
WIRED LAN or WIRELESS LAN (ADVANCED menu only)
PROFILES•	 Up	to	two	 settings	 for	the	 LAN	 port	or	USB	 wireless	 LAN	unit	
can	be	stored	 in	memory	 of	the	 projector. 	Total	 of	four	 settings	
can	be	stored.
	 Five	 settings	 can	be	stored: 	two	 for	the	 built-in	 LAN	port,	 two	
for	wireless	LAN	and	one	for	 WPS.
•	 Select	[PROFILE	 1]	or	 [PROFILE	 2]	and	 then	 do	settings	 for	
[DHCP]	and	the	other	options. 	
	 After	doing	this,	select	 [OK]	and	press	 the	ENTER...

109
5. Using On-Screen Menu
•	 When	selecting	 [WPS],	the	network	 will	be	connected	 by	using	
settings	stored	automatically	with	the	 WPS	function.
	 Selecting	[WPS]	will	allow	 the	projector	 to	access	 the	network	
by	using	the	settings	the	 WPS	function	automatically	stored.
DHCPPlace	a	check	 mark	to	automatically	 assign	an	IP	address	 to	the	
projector	from	your	DHCP	server.
Clear	 this	check	 box	to	register	 the	IP	address	 or	subnet	 mask	
number	obtained	from	your	network	administrator.
—
IP...

110
5. Using On-Screen Menu
SITE	SURVEYDisplays	a	list	 of	available	 SSIDs	for	wireless	 LAN	on	site. 	Select	
an	SSID	which	you	can	access.
To	 select	 an	SSID,	 highlight	 [SSID]	and	use	the	SELECT	→  to 
select	[OK]	and	press	the	ENTER	button. 	
 �����������������������Wireless access point 
 �����������������������Ad Hoc PC 
 �����������������������WEP or WPA enabled —
SECURITY
This	 will	turn	 on	or	off	 the	 encryption	 mode	for	secure	 transmis-
sion.
To	 use	 encryption,	 specify	a	WEP	 key	or...

111
5. Using On-Screen Menu
When [WEP(64bit)] or [WEP(128bit)] is selected for [SECURITY TYPE]
KEY	SELECTSelects	one	WEP	key	from	the	four	keys	below.
KEY1,	KEY2,	KEY3,	
KEY4
Enter	a	WEP	key.
• Maximum number of characters
Option Alphanumeric	(ASCII) Hexadecimal	(HEX)
WEP	64bit 510
WEP	128bit 1326
When [WPA-PSK], [WPA-EAP], [WPA2-PSK], or [WPA2-EAP] is selected for [SECURITY TYPE]
ENCRYPTION	TYPESelect	[TKIP]	or	[AES].
KEYEnter	encryption	key. 	Key	length	must	be	8	or	greater	and	63	or	less. 

112
5. Using On-Screen Menu
[AUTHENTICATION] (required for wireless only)
Setting	is	required	for	using	WPA-EAP	or	WPA2-EAP.	
Preparation before setting
Select	a	wireless	 LAN	compliant	 WPA-EAP	 or	WPA2-EAP	 authentication	 and	install	 a	digital	 certificate	 on	the	 projec-
tor.
1.	 Set	[DATE	AND	 TIME]	on	the	projector. 	(→	page	127)
2.	 Use	a	computer	 to	save	 digital	 certificates	 (files)	for	WPA-EAP	 or	WPA2-EAP	 setting	to	your	 USB	memory	
device.
 After completing saving the file, remove the...