NEC Np905 Projector User Manual

47
Disabling the Security
1.  Press the MENU button.
  t he menu will be displayed.
NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is dis-
played at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time, 
pressing the MENU button will display the menu.
2.
 
Press the SELECT 
 button to highlight [ S ETUP] and press the ENTER button.
  t
he page tab [ Basi
C
] will be...

48
4. Convenient Features
 Limiting Access Level to Available Menu Items
The Account function allows you to manage available menu items by user l\
evel.
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED menu  ..This is the menu that contains all the available menus and commands. Use\
rs with an ADMINISTRATOR or 
ADVANCED account can access the ADVANCED menu.
BASIC menu  ..........This  is  the  basic  menu  that  contains  minimum  essentials  of  menus  and  commands....

49
4. Convenient Features
Creating or Adding a User
1.   From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
2. 
 
Select [ACCOUNT]-[SETTINGS].
  t
he [
a
CCOU
nt
] setting screen will be displayed.
 
3.    Select [CREATE].
  t
he [ a CCOU nt ] create screen will be displayed.
 
4.  Enter a user name, user type, and password.
•
  A user name must be 16 alphanumeric characters or less (case sensitive)\
.
•
  User type has two options: [ADVANCED] and [BASIC].
•
  Use the software...

50
4. Convenient Features
Editing a User (Changing Account Settings)
1.   From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to change the account settings.
2.
 
Select [ACCOUNT]-[SETTINGS].
  t he [ a CCOU nt ] setting screen will be displayed.
3.
 
Select a user name you wish to edit.
4. 
 
Select [EDIT].
  t he [ edit ] screen will be displayed.
  e nter your password and press the  enter  button.
  i
f no password is...

51
4. Convenient Features
L Operation Using an HTTP Browser
Overview
The  use  of  HTTP  server  functions  will  allow  control  of  the  projector  from  a  web  browser  without  the  installation  of 
special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This 
device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting meth-
od will vary depending on the version of browser. Please refer to...

52
Structure of the HTTP Server
POWER: This controls the power of the projector.
ON  .....................................Power is switched on.
OFF   ...................................Power is switched off.
VOLUME: This controls the volume of the projector.
    .....................................Increases the volume adjustment value.
    .....................................Decreases the volume adjustment value.
AV-MUTE: This controls the mute function of the projector.
PICTURE ON...

5
SOURCE SELECT: This switches the input connector of the projector.
C OMPUTER  1   ...................
Switches to the COMPUTER 1 IN connector.
C
OMPUTER
 2
 
...................
Switches to the COMPUTER 2 IN connector.
HDMI   .................................Switches to the HDMI IN connector.
V
IDEO
 
...............................
Switches to the VIDEO IN connector.
S- V IDEO   ...........................Switches to the S-VIDEO IN connector.
V
IEWER
 
............................
Switches to...

54
M Projecting Your Computer’s Screen Image from the Projector  
via a Network [NETWORK PROJECTOR]
A  Windows  Vista-based  computer  can  be  operated  using  the  projector  over  a  network.  The  projector  supports  the 
Network Projector function and the Remote Desktop function of Windows Vi\
sta. 
By selecting the projector connected to the same network as that of your PC, the PC screen image can be project-
ed to the screen via network. There is no need of connection using the V\
GA signal...

55
4. Convenient Features
2.  Press the SELECT  or  button to select [NETWORK] and press the ENTER button.
  i
n the screen, the [
net
WO
r K] menu is displayed.
 
3.    From the [NETWORK] menu, select [NETWORK PROJECTOR].
  t
he [P r OJ e C t O r   na M e / dis P la Y  res O l U ti O n /P ass WO rd /U rl ] will be displayed.
 
TIP:
•  To change the default password “1234”, select [CHANGE] and press th\
e ENTER button.
 
The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The...

5
4. Convenient Features
Changing the resolution of Windows Vista screen to the information on [D\
IS p LAY RESOLUTION] 
in the NETWORK 
p
ROJECTOR screen.
1.   Click [Start] from the desktop of Windows Vista.
2.   Click [Control Panel].
3.
  Click [Adjust screen resolution] displayed under [Appearance and Personalization].
4.
  Operate [Resolution] slide bar to change the resolution to the resolution displayed on [DISPLA y  RESO
-
LUTION] in the NETWORK PROJECTOR screen..
 
5.  Click [OK].
  t he...