NEC Np905 Projector User Manual

7
4. Convenient Features
Operating your computer’s mouse from the remote control
You can operate your computer’s mouse from the remote control.
PAGE UP/DOWN Button   ...................scrolls the viewing area of the window or to move to the previous or next slide in Power-
Point on your computer.
SELECT  Button  ..................moves the mouse cursor on your computer.
MOUSE L-CLICK Button   ..................works as the mouse left button.
MOUSE R-CLICK Button  ..................works as the...

8
 Correcting Horizontal and Vertical Keystone Distortion (Cor-
nerstone)
Use the 3D Reform feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right 
side of the screen longer or shorter so that the projected image is rect\
angular.
4. Convenient Features
Projected image
Cornerstone
1.   Press and hold the 3D REFORM button for a minimum of 2 seconds to reset current adjustments.
  Current adjustments for [ Ke
Y st O ne
] or [C O rnerst O ne] will be...

9
8.   Press the ENTER button.
4. Convenient Features
10.  Press the SELECT  or  button to highlight the [OK] and press the ENTER button.
This completes the Cornerstone correction.
Selecting [ C ANCEL] will return to the adjustment screen without saving changes (Step 3)\
.
Selecting [R ESET] will return to the factory default.
Selecting [U NDO] will exit without saving changes.
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D R\
EFORM button for a minimum of 2...

40
4. Convenient Features
*  The following are conditions under which the maximum angle is achieved:
•   Image is projected in Wide (Zoom lever to the maximum)
NOTE: 
•  Even when the projector is turned on, the last used correction values ar\
e applied.
•
  Turning  on  the  projector  will  reset  the  previous  correction  setting  values  and  correct  distortion  anew  if  the  projection  angle  is 
changed from the last use.
 
If the projection angle is the same as in the last use, the previous...

41
4. Convenient Features
9 Displaying Two Pictures at the Same Time
The projector has a feature that allows you to view two different signals simultaneously. You have two modes: PIP 
mode and Side by Side mode.
From the menu you can select [SETUP] → [BASIC] → [PIP/SIDE B y  SIDE]. 
The [PIP/SIDE BY SIDE] menu item has the following three options: MODE, \
POSITION, and SOURCE.
Use the SELECT  or  button to select [MODE], [POSITION] or [SOURCE] and press the ENTER but\
ton.
Selecting the PIP or SIDE BY...

42
4. Convenient Features
Viewing Two p ictures
1.  Press the PIP button on the remote control.
  t he P i P/ side  BY  side  s
OU r C e
 screen will be displayed.
 
2.  Use the SELECT  or  button to select the source and press the ENTER button.
  t
he P
i
P screen or 
side
 BY  side  screen will be displayed, depending on which was selected in the [MO de ] set
-
ting screen.
 
3. Press the PIP button again to return to the normal screen (single picture).
TIP: 
•  Selecting another source will return...

4
4. Convenient Features
 Preventing Unauthorized Use of the Projector
Assigning a keyword prevents the projector from being used by unauthoriz\
ed individuals.
Turning on the Security function by assigning a keyword for the first time
1.   Press the MENU button.
  The menu will be displayed.
 
2.
  Press the SELECT 
 button to highlight the [ S ETUP] submenu and press the ENTER button.
 
The page tab [ B
ASIC
] will be highlighted.
 
3.   Press the SELECT  button three times to highlight the...

44
4. Convenient Features
4.  Press the SELECT  button three times to highlight [ S ECURIT y SETTINGS].
 
5.
  Press the ENTER button to display the SECURIT y  SETTINGS menu.
 
6. Press the SELECT   button four times to highlight [SECURIT y  SETTINGS] and press the ENTER button.
 The Security screen will be displayed.
 
 7.  Press the SELECT  button once to highlight the Keyword entry box and press the ENTER button.
 
The Software keyboard will be displayed. 

45
4. Convenient Features
8.  Enter an alphanumeric keyword using the Software keyboard.
  For example, to enter “1234”, follow the steps 8-1 to 8-4 below.
 
NOTE: 
•  When using your USB mouse, click each number or alphabet.
 
BS: Delete the character before the cursor or highlight. 
: Confirm the keyword and close the Software keyboard.
• The keyword must be 1 to 10 characters long.
• Please make a note of your keyword.
e nter a keyword by using the remote control.
8-1.
  Press the M en U button and...

4
4. Convenient Features
10. Press the SELECT  button to highlight [OK] and press the ENTER button.
 
The confirmation screen will be displayed.
 
11.   Press the SELECT  or   button to highlight [ y ES] and press the ENTER button.
 
The Security Function will take effect when the projector is turned on next time.
Checking If Security is enabled
Turn off the projector and turn it back on to check if the Security func\
tion is enabled.
1.
  Press the POWER button.
  t he [POW er  O ff  /  are...