NEC Np905 Projector User Manual

							
47
Disabling the Security
1.  Press the MENU button.
  t he menu will be displayed.
NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is dis-
played at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time, 
pressing the MENU button will display the menu.
2.
 
Press the SELECT 
 button to highlight [ S ETUP] and press the ENTER button.
  t
he page tab [ Basi
C
] will be highlighted.
3.
 
Press the SELECT 
 button twice to highlight the page tab [INSTALLATION (2)].
4.
 
Press  the  SELECT 
  button  three  times  to  highlight  [ S ECURIT y  SETTINGS]  and  press  the  ENTER  but-
ton.
5.
 
Press the SELECT 
  button four times to highlight [SECURIT y ] - [SETTINGS] and press the ENTER but-
ton.
  t he Keyword entry screen will be displayed
 
6.   Press the ENTER button.
  t he  s oftware keyboard will be displayed.
7.
  Use the same procedures as steps 1 to 8 described in the “Turning on the Security function by assigning 
a keyword for the first time” section to enter “1234”.
  e ach  time  one  number  is  entered,  an “
”  (asterisk)  will  appear.  Keyword  appears  as  asterisks  so  the  real  key-
word is hidden.
8.
 
After entering your keyword, highlight [OK] and press the ENTER button.
  t he  s oftware keyboard will disappear.  t he  s ecurity screen will be displayed.
9.
 
Highlight [ O
N
] and press the SELECT  button to highlight [ O FF].
10.  Press the SELECT  button to highlight [OK] and press the ENTER button.
  t
he 
s
ecurity 
f
unction will be disabled when the projector is turned on next time.
NOTE:  Do  not  forget  your  keyword.  However,  if  you  forget  your  keyword,  NEC  or  your  dealer  will  provide  you  with  your  Release 
Code upon proof of ownership.
4. Convenient Features 
						

							
48
4. Convenient Features
 Limiting Access Level to Available Menu Items
The Account function allows you to manage available menu items by user l\
evel.
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED menu  ..This is the menu that contains all the available menus and commands. Use\
rs with an ADMINISTRATOR or 
ADVANCED account can access the ADVANCED menu.
BASIC menu  ..........This  is  the  basic  menu  that  contains  minimum  essentials  of  menus  and  commands.  Users  with  a  BASIC 
account can access the BASIC menu.
See page 49 for settings available to ADVANCED and BASIC menus.
NOTE: 
•   A user with an ADMINISTRATOR account that has no password set is registered at the factory.
This will allow the user to access the ACCOUNT items without password entry.
Logging On
Logging on your projector
When a user is registered, trying to display the menu will display the LOGON screen, prompting the user to select 
the user and to enter the password.
NOTE: If one user logs on to the projector, any other user cannot log on.
1. 
  Enter a user name.
2. 
  Enter the registered password if you have it.
3. 
  Select [OK].
NOTE:  Do  not  forget  your  password.  If  you  forget  your  password,  ask  your  administrator.  If  your  administrator  forget  the  pass-
word,  ask  NEC  or  your  dealer.  NEC  or  your  dealer  will  provide  you  with  your  Release  Code  (24  character  length)  upon  proof  of 
ownership. 
Logging Off
Logging off your projector
Logging off your projector will prevent an unauthorized user from operat\
ing your projector.
1.   From the menu, select [SETUP] 
→ [BASIC] → [LOGOFF].
2. 
 
Select [
y
ES]. 
						

							
49
4. Convenient Features
Creating or Adding a User
1.   From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
2. 
 
Select [ACCOUNT]-[SETTINGS].
  t
he [
a
CCOU
nt
] setting screen will be displayed.
 
3.    Select [CREATE].
  t
he [ a CCOU nt ] create screen will be displayed.
 
4.  Enter a user name, user type, and password.
•
  A user name must be 16 alphanumeric characters or less (case sensitive)\
.
•
  User type has two options: [ADVANCED] and [BASIC].
•
  Use the software keyboard to enter a password in the NEW PASSWORD entry \
field. 
  a   password  must  be  10  alphanumeric  characters  or  less.  i f  no  password  is  set,  the  user  is  registered  without  a 
password.
•  After entering a password, enter the same password in [CONFIRM PASSWORD]\
 input screen again.
•
  Make a note of your password.
5.
 
Place a checkmark on [ENABLE].
  t he account will be made available.
6.
 
Select [OK].
  t his will complete adding a user.
NOTE: Up to 12 user names can be created. 
						

							
50
4. Convenient Features
Editing a User (Changing Account Settings)
1.   From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to change the account settings.
2.
 
Select [ACCOUNT]-[SETTINGS].
  t he [ a CCOU nt ] setting screen will be displayed.
3.
 
Select a user name you wish to edit.
4. 
 
Select [EDIT].
  t he [ edit ] screen will be displayed.
  e nter your password and press the  enter  button.
  i
f no password is set, simply press the  enter  button without entering any password.
5. 
 
Change the settings and select [OK].
Deleting a User
1.    From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURIT y  SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to delete the account settings.
2.
 
Select [ACCOUNT]-[SETTINGS].
  t he [ a CCOU nt ] setting screen will be displayed.
3.
 
Select a user name you wish to delete.
 
4.    Select [DELETE].
  t
he [ delete ] screen will be displayed.
  e
nter your password and press the  enter  button. 
  t
he confirmation screen will be displayed.
5. 
  Select [ y ES].
  t
his will complete deleting the user.
NOTE:  Do  not  forget  your  password.  If  you  forget  your  password,  ask  your  administrator.  If  your  administrator  forget  the  pass-
word,  ask  NEC  or  your  dealer.  NEC  or  your  dealer  will  provide  you  with  your  Release  Code  (24  character  length)  upon  proof  of 
ownership. 
						

							
51
4. Convenient Features
L Operation Using an HTTP Browser
Overview
The  use  of  HTTP  server  functions  will  allow  control  of  the  projector  from  a  web  browser  without  the  installation  of 
special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This 
device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting meth-
od will vary depending on the version of browser. Please refer to the help files and the other information provided in 
your software.)
Access is gained to the HTTP server functions by specifying
    http://  /index.html
in the entry column of the URL.
NOTE:
•  The  display’s  or  button’s  response  can  be  slowed  down  or  operation  may  not  be  accepted  depending  the  settings  of  your  net
-
work. Should this happen, consult your network administrator.
 
The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and 
repeat. If you still can’t get any response, turn off and back on the\
 projector.
•
 
Do not use the HTTP Server functions and PC Control Utility 3.0 included on the supplied Supportware 5 CD-ROM. Using both 
at the same time may result in a connection failure or slow response.
Preparation Before Use
Make network connections and set up the projector and confirm that it is complete before engaging in browser op-
erations. (→ [NETWORK SETTINGS] on page 99)
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and 
the  setting  method.  Although  the  type  of  proxy  server  will  be  a  factor,  it  is  possible  that  items  that  have  actually 
been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser 
may not be reflected in operation. It is recommended that a proxy serv\
er not be used unless it is unavoidable.
Handling of the Address for Operation via a Browser
Regarding  the  actual  address  that  is  entered  for  the  address  or  entered  to  the  URL  column  when  operation  of  the 
projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address 
of  the  projector  has  been  registered  to  the  domain  name  server  by  a  network  administrator,  or  the  host  name  cor-
responding to the IP address of the projector has been set in the “HO\
STS” file of the computer being used.
Example 1:
  When the host name of the projector has been set to “pj.nec.co.jp”\
,
 
http://pj.nec.co.jp/index.html
 
is specified for the address or the entry column of the URL.
Example 2:
  When the IP address of the projector is “192.168.73.1”, access is \
gained to the 
 
HTTP server functions by specifying
 
http://192.168.73.1/index.html
 
for the address or the entry column of the URL. 
						

							
52
Structure of the HTTP Server
POWER: This controls the power of the projector.
ON  .....................................Power is switched on.
OFF   ...................................Power is switched off.
VOLUME: This controls the volume of the projector.
    .....................................Increases the volume adjustment value.
    .....................................Decreases the volume adjustment value.
AV-MUTE: This controls the mute function of the projector.
PICTURE ON   ....................Mutes the video.
PICTURE OFF   ..................Cancels the video muting.
SOUND ON  .......................Mutes the audio.
SOUND OFF   .....................Cancels the audio muting.
OSD ON  ............................Mutes the on-screen display.
OSD OFF   ..........................Cancels the muting of the on-screen display.
ALL ON  .............................Mutes each of the video, audio, and on-screen display functions.
ALL OFF   ............................Cancels the muting of each of the video, audio, and on-screen display fu\
nctions.
PICTURE: Controls the video adjustment of the projector.
BRIGHTNESS     .............Increases the brightness adjustment value.
BRIGHTNESS    ..............Decreases the brightness adjustment value.
CONTRAST    .................Increases the contrast adjustment value.
CONTRAST    .................Decreases the contrast adjustment value.
COLOR    ........................Increases the color adjustment value.
COLOR    ........................Decreases the color adjustment value.
HUE    ..............................Increases the hue adjustment value.
HUE    ..............................Decreases the hue adjustment value.
SHARPNESS    ...............Increases the sharpness adjustment value.
SHARPNESS    ...............Decreases the sharpness adjustment value.
•
 
The functions that can be controlled will vary depending on the signal b\
eing input to the projector. (→ page 80)
4. Convenient Features 
						

							
5
SOURCE SELECT: This switches the input connector of the projector.
C OMPUTER  1   ...................
Switches to the COMPUTER 1 IN connector.
C
OMPUTER
 2
 
...................
Switches to the COMPUTER 2 IN connector.
HDMI   .................................Switches to the HDMI IN connector.
V
IDEO
 
...............................
Switches to the VIDEO IN connector.
S- V IDEO   ...........................Switches to the S-VIDEO IN connector.
V
IEWER
 
............................
Switches to the data on the USB memory device.
NETWORK   ........................Switches to a LAN signal.
PROJECTOR STATUS: This displays the condition of the projector.
LAMP LIFE REMAINING   ....Displays the remaining life of the lamp as a percentage.
LAMP HOURS USED.......Displays how many hours the lamp has been used.
FILTER HOURS USED   ....Displays how many hours the filter has been used.
ERROR STATUS  .............Displays the status of errors occurring within the projector.
4. Convenient Features 
						

							
54
M Projecting Your Computer’s Screen Image from the Projector  
via a Network [NETWORK PROJECTOR]
A  Windows  Vista-based  computer  can  be  operated  using  the  projector  over  a  network.  The  projector  supports  the 
Network Projector function and the Remote Desktop function of Windows Vi\
sta. 
By selecting the projector connected to the same network as that of your PC, the PC screen image can be project-
ed to the screen via network. There is no need of connection using the V\
GA signal cable.
The projector supports the Network Projector function and the Remote Des\
ktop function of Windows Vista.
Operation Environment
Applicable OSWindows Vista (32-bit version) Home Premium
Windows Vista (32-bit version) Business
Windows Vista (32-bit version) Ultimate
Windows Vista (32-bit version) Enterprise
(Note)   These functions are not available on Windows Vista Home Basic.
Hardware specificationsThe  specifications  recommended  by  Microsoft  as  the  operation  environment  for 
Windows Vista should be satisfied.
Network EnvironmentWired LAN or wireless LAN environment that supports TCP/IP is required.
Screen colorHigh Color (16 bits)
True Color (24 bits and 32 bits)
* Setting with 256 colors or less is not available.
Setting the  p rojector to Network  p rojector Input  m ode
1.  With the projector turned on, press the SOURCE button.
  t he input selection window appears.
  a nother  way  to  display  the  input  selection  window  is  to  press  the  net WO r K  button  on  the  remote  control.  t he 
net WO r K screen will be displayed.  g o to step 3.
 
4. Convenient Features
VIDEO INAUDIO INUSBLANAUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 INPC CONTROLMONITOR OUTAUDIO OUTS-VIDEO INAUDIO INL/MONOL/MONORRAC IN
USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT (LAN)USBWIRELES SWIRELES S 
						

							
55
4. Convenient Features
2.  Press the SELECT  or  button to select [NETWORK] and press the ENTER button.
  i
n the screen, the [
net
WO
r K] menu is displayed.
 
3.    From the [NETWORK] menu, select [NETWORK PROJECTOR].
  t
he [P r OJ e C t O r   na M e / dis P la Y  res O l U ti O n /P ass WO rd /U rl ] will be displayed.
 
TIP:
•  To change the default password “1234”, select [CHANGE] and press th\
e ENTER button.
 
The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The passwor\
d must be eight characters or less.
 
The changed password stored in the projector will be displayed in the [N\
ETWORK PROJECTOR] screen next time. 
						

							
5
4. Convenient Features
Changing the resolution of Windows Vista screen to the information on [D\
IS p LAY RESOLUTION] 
in the NETWORK 
p
ROJECTOR screen.
1.   Click [Start] from the desktop of Windows Vista.
2.   Click [Control Panel].
3.
  Click [Adjust screen resolution] displayed under [Appearance and Personalization].
4.
  Operate [Resolution] slide bar to change the resolution to the resolution displayed on [DISPLA y  RESO
-
LUTION] in the NETWORK PROJECTOR screen..
 
5.  Click [OK].
  t he message “ d o you keep this screen setting?” is displayed.
6.
  Click [ y es].
  t he  resolution  of Windows Vista  screen  is  changed  to  the  resolution  displayed  on  [ dis P la Y  res O l U ti O n ]  in 
the 
net WO r K P r OJ e C t O r  screen..
projecting the Image with Network  p rojector
1.  Click [Start] from the desktop of Windows Vista.
2.   Click [All Programs].
3.
  Click [Accessories].
4.
  Click [Connect to a Network Projector].
  When the [Permission Connect to a  n etwork Projector] window appears,click [Yes.].
  t he “Connect to a  n etwork Projector” window appears.