NEC Np60 Projector User Manual

33
SELECTSOURCEAUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
SOURCEAUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
SELECT
SOURCEAUTO
ADJ.
O N/STA ND BY
FOCUSLAMP
STATUS
PO
WER
SELECT
SELECTSOURCEAUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
➊
 Using the Menus
NOTE: The on-screen menu may not be displayed correctly while an interlaced motion video image is projected.
1.  Press the MENU button on the remote control or projector cabinet to display the main menu.
5. Using On-Screen Menu
ENTEREXITUP
PAGE
OFF...

34
SELECTSOURCEAUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
5. Using On-Screen Menu
ENTEREXIT
MENU
UP
PAGE
OFF
POWER ON
PIC-MUTE
DOWN
FOCUS
6.  Repeat steps 2-5 to adjust an additional item, or press the EXIT button several times to close the menu.
Slide bar
Solid triangle
Return key symbol
Radio button
For Adjusting items (Slide bar) Slide bar ..................... Indicates settings or the direction of adjustment.
• Use the SELECT  ◀▶ buttons to adjust the item.
For Selecting items (Solid triangle)...

35
5. Using On-Screen Menu
➋ Menu Elements
Highlight
TitleSlide bar
Off Timer remaining time
Source
Radio button
Solid triangle
Key Lock symbol
Menu windows or dialog boxes typically have the following elements:Title .......................................... Indicates the menu title.
Highlight ................................... Indicates the selected menu or item. 
Source ...................................... Indicates the currently selected source.
Off timer remaining time .......... Indicates the...

36
Picture   Default Item   
Preset      1 to 6
 Detail Settings Reference  * 
High-Bright, Presentation, Video, Movie, Graphic, sRGB
    Gamma Correction  *  Dynamic, Natural, Black Detail
    Color Temperature  *  5000, 6500, 7800, 8500, 9300, 10500
   White Peaking  *
Contrast
Brightness
Sharpness
Color
Hue
Reset
Image Options   Default Item    
Aspect Ratio    *  Normal, Cinema, Native
Cinema Position
Position/Clock Horizontal  *
   Ver t i c al  *
   Clock  *
   Phase  *
Noise Reduction    Off...

37
Information   Item
Usage Time  Lamp Life Remaining   
    Lamp Hours Used   
Source Horizontal Frequency  
   Ver t i c al Fre qu en cy   
   Video Type 
NTSC, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
    Sync Type  Separate Sync, Composite Sync, Sync on Green, Sync on Video
   Sync Polarity
    Scan Type  Interlace, Non-Interlace
Version Product
   Serial Number
   Firmware
   Data
Reset   Item
 Current Signal    
 All Data     
  Clear Lamp Hours
5. Using On-Screen Menu 

38
5. Using On-Screen Menu
➍ Menu Descriptions & Functions [Picture]
Preset
Detail Settings
Selecting Reference Setting [Reference]
This option allows you to select one of fi ve user adjustable presettings. There are 6 factory presets optimized 
for various types of images, you can set user adjustable settings.
High-Bright ........... Recommended for the use in a brightly lit room.
Presentation .......... Recommended for making a presentation using a PowerPoint fi le.
Video ........................

39
5. Using On-Screen Menu
Adjusting Contrast, Brightness, Sharpness, Color and Hue
You can adjust contrast, brightness, sharpness, color and hue.
TIP:  When one of Contrast, Brightness, Sharpness, Color or Hue is highlighted, pressing the ENTER button will display its slide 
bar for adjustment.
Contrast ................ Adjusts the intensity of the image according to the incoming signal (White level of the image).
Brightness ............. Adjusts the brightness level or the black level of the image....

40
5. Using On-Screen Menu
NOTE: When you are displaying an RGB image with a higher resolution than the projectors native resolution, the image will be dis-
played in [Normal] even if [Native] is selected. Only when displaying an RGB image with a lower resolution than the projec-
tors native resolution, will the image be able to be displayed in its true resolution [Native].
When [Normal] is selected, an HDTV (1080i/720p) signal will be shown in its true aspect, as is the case when selecting [Cinema] ....

41
5. Using On-Screen Menu
➏ Menu Descriptions & Functions [Setup]
[Setup - General]
Enabling Auto Keystone [Auto Keystone]
This feature allows the projector to detect its tilt and correct vertical distortion automatically.
To turn on the Auto Keystone feature, select “On".
Correcting Vertical Keystone Distortion Manually [Keystone]
You can correct vertical distortion manually. ( → page 
25)
TIP:  When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment....

42
5. Using On-Screen Menu
[Setup - Installation]
Selecting Projector Orientation [Orientation]
This sets your image for your type of projection application. The options are:
desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection.
Desktop front Ceiling rear
Desktop rear
Ceiling front
Selecting Communication Speed [Communication Speed]
This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It supports data rates from 4800 to 38400 
bps....