NEC Np60 Projector User Manual

13
AUDIO INLR
AUDIO OUT
LR
Component
YCbCr
S-VIDEO IN
VIDEO IN
COMPUTER IN
PC CONTROLAC IN
COMPUTER IN
2. Installation and Connections
NOTE: Refer to your DVD players owners manual for more information about your DVD players video output requirements.
Connecting Your DVD Player with Component Output
DVD player Audio Equipment
Optional 15-pin - to - RCA (female)
 
× 3 cable (ADP-CV1E)
Component video RCA ×3 cable 
(not supplied)
Audio cable (not supplied) 

14
AUDIO INLRAUDIO OUTLRVIDEO OUTS-VIDEO
VIDEO
S-VIDEO IN
VIDEO IN
COMPUTER IN
PC CONTROLAC IN
VIDEO IN
S-VIDEO IN
2. Installation and Connections
Connecting Your VCR or Laser Disc Player
S-Video cable (not supplied)
Video cable (not supplied)
VCR/ Laser disc player
Audio equipment
Audio cable (not supplied)
NOTE: Refer to your VCR or laser disc player owners manual for more information about your equipments video output require-
ments.
NOTE: An image may not be displayed correctly when a Video or...

15
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other 
plug of the supplied power cable in the wall outlet.
To wa l l o u t l e t
The projector will go into its stand-
by mode and the power indicator 
will glow orange.
CAUTION:
Do not try to touch the ventilation outlet on the right front (when seen from the front) as it...

16
AUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
SELECT
3. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to project a picture onto the screen.
➊
 Turning on the Projector
NOTE: Before turning on the projector, fi rst connect the supplied power cables three-pin plug to the AC IN of the projector, a nd 
then connect the other plug of the supplied power cable in the wall outlet. Make sure that the projector is in its standby mode  
and the power indicator is...

17
SOURCEAUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
SELECT
SOURCEAUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
SELECT
EXIT
MENU
UP
PAGE
OFF
POWER ON
PIC-MUTE
DOWN
FOCUS
ENTER
3. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When you fi rst turn on the projector, you will get the Startup menu. The menu gives you the opportunity to select 
the menu in one of the nine languages.
To select a menu language, follow these steps:
1.  Use the SELECT  ▲ or  ▼ button...

18
SELECTSOURCEAUTO
ADJ.
ON/STAND BY FOCUSLAMP
STATUS
POWER
3. Projecting an Image (Basic Operation)
➋
 Selecting a Source
Selecting the computer or video source
LAMP MODE
VOLUMES-VIDEO
VIDEO
L-CLICK
MOUSE
R-CLICK
AUTO ADJ.
COMPUTER
ASPECT HELP
FREEZE
PICTURE
NOTE: Turn on the computer or video source equipment connected to the pro-
jector.
Adjusting with buttons on the cabinet
1.  Press the SELECT  ▶ button with no menus displayed.
  The Source list will be displayed.
  - When the menu is displayed,...

19
3. Projecting an Image (Basic Operation)
Selecting Default Source
You can set a source as the default source so that the default source will be displayed each time the projector is 
turned on.
1. S e l e c t [ S e t u p - O p t i o n s ]  → [Default 
Source Select] from the menu.
  The [Default Source Select] screen will be  displayed.
 
2. Select a source as the default source,  and press the ENTER button.
 
3. P r e s s t h e E X I T b u t t o n a f e w t i m e s t o  close the menu.
4.  Restart...

20
3. Projecting an Image (Basic Operation)
Place your projector on a fl at level surface and ensure that the 
projector is square to the screen.
Lift the front edge of the projector to center the image verti-
cally.
*  I f t h e pr o j e c te d i m ag e d o e s n ot a p p e ar s q u are to t h e screen then use the Keystone feature for proper adjust-
ment. ( → page 
25)
➌
 Adjusting the Picture Size and Position
About Auto Focus
Just placing the projector on a fl at level surface makes a fo-
cused...

21
LAMP
ST ATU S
PO WERO N/S TA ND  BYSOU RCEAU TO
AD J.S ELE CTFO CUS
2
1
S-VIDEO IN
VIDEO IN
COMPUTER IN
PC CONTROLSO
URCEAUTO
A D J.SELECTON/STAND BYLAMP
STATUS
POW ERFOCUS
AC IN
3. Projecting an Image (Basic Operation)
Adjust the Tilt Foot
1.  Lift the front edge of the projector.
CAUTION:
Do not try to touch the ventilation outlet during Tilt Foot adjust-
ment as it can become heated while the projector is turned on and 
during its cool down period after it is turned off.
2.  Push up and hold the...

22
3. Projecting an Image (Basic Operation)
Zoom
Use the ZOOM lever to adjust the image size on the 
screen.
NOTE: Rotating the ZOOM lever will cause the focus to be ad-
justed automatically.
Auto Focus
The focus sensor on the projector detects the distance to the screen and automatically adjusts the focus of an 
image.
•  The Auto Focus function will work when the following tasks are done:-  Turning on the power
-  Changing the zoom lever
-  Repositioning the projector
-  Changing the projection angle...