NEC Np1200 Lcd Projector Users Manual

8 Network Setting by Using an HTTP Browser
Overview
Connecting	the	projector	 to	a	network	 allows	the	Alert	 Mail	setting	 (→	page	42)	 and	 the	projector	 control	from	a	
computer	via	the	network.
To	perform	the	projector	control	from	a	web	browser,	you	must	have	an	exclusive	application	 “PC	Control	Utility	Pro	4”	
installed	on	your	computer	from	the	supplied	NEC	Projector	CD-ROM. 	
The	IP	address	 and	subnet	 mask	of	the	 projector	 can	be	set	 on	the	 Network	 Setting	screen	of	the	 web	 browser	 by...

Network	Settings
http://	/index.html
DHCP ����������������������������Enabling this option automatically assigns an IP address to the projector from your DHCP server � Dis-
abling  this  option  allows  you  to  register  the  IP  address  or  subnet  mask  number  obtained  from  your 
network administrator�
TIP:	You	can	check	the	IP	address	in	the	menu	when	[ENABLE]	is	selected	for	[DHCP].	To	do	so,	from 	
the menu, select [INFO.] →	[WIRED	LAN].
IP ADDRESS �����������������Set your IP address of the...

Alert	Mail	Setting
http:///lanconfig.html
This	option	 notifies	 your	computer	 of	an	 error	 message	 via	e-mail	 when	using	wired	LAN.	An	 error	 message	 notifi-
cation	will	be	sent	when	the	projector	lamp	has	reached	the	end	of	its	usable	life	or	an	error	occurs	in	the	projector.
HOST NAME  �����������������������������������Type  in  the  hostname  of  the  network  connected  to  the  projector �  Up  to  60  alphanumeric 
characters can be used� If the host name is unknown, type in a string of...

9 Using the VGA Signal Cable to Operate the Projector (Virtual 
Remote)
Using	the	utility	 software	 “Virtual	Remote	 Tool”	included	 on	the	 companion	 NEC	Projector	 CD-ROM,	 Virtual	Remote	
screen	(or	toolbar)	can	be	displayed	on	your	computer	screen.
This	will	help	 you	perform	 operations	 such	as	projector’s	 power	on	or	off	 and	 signal	 selection	 via	the	 VGA	 signal	
cable.
Virtual	Remote	screenToolbar
This	section	provides	an	outline	of	preparation	for	use	of	 Virtual	Remote	Tool.
For...

Install Virtual Remote Tool
Preparation:
Exit	all	running	 programs	 before	installing	 Virtual	Remote	 Tool.	If	 another	 program	 is	running,	 the	installation	 may	
not	be	completed. 	To	 install	 Virtual	 Remote	 Tool,	the	Windows	 user	account	 must	have	[Administrator]	 privilege	
(Windows	7,	Windows	Vista	and	 Windows	2000)	or	[Computer	Administrator]	privilege	(Windows	XP).
1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.
	 The	 folders	in	NEC	 Projector	 CD-ROM	 will	be...

TIP:
Uninstalling	Virtual	Remote	 Tool
Preparation:
Exit	Virtual	 Remote	 Tool	before	 uninstalling. 	To	 uninstall	 Virtual	Remote	 Tool,	the	Windows	 user	account	 must	have	
“Administrator” 	privilege	 (Windows	 7,	Windows	 Vista	and	Windows	 2000)	or	“Computer	 Administrator” 	privilege	
(Windows	XP).
•	For	 Windows	7/Windows	 Vista
1 Click “Start” and then “Control Panel”.
	 The	Control	Panel	window	will	be	displayed.
2 Click “Uninstall a program” under “Programs”
	 The	 “Programs	and	Features”...

Step 3: Start Virtual Remote Tool
1 Double-click the shortcut icon  on the Windows Desktop.
	 When	 Virtual	Remote	 Tool	starts	for	the	first	time,	 “Easy	Setup”	window	will	be	displayed.
	 Follow	the	instructions	on	the	screens
	 When	“Easy	Setup” 	is	completed,	the	 Virtual	Remote	Tool	screen	will	be	displayed.
TIP:
•	 The	Virtual	Remote	Tool	screen	(or	Toolbar)	can	be	displayed	without	displaying	“Easy	Setup”	window.
 To do so, click to place a check mark for “ 	Do	not	use	Easy	Setup	next	time”	on	the...

Exiting	Virtual	Remote	 Tool
1 Click the Virtual Remote Tool icon  on the Taskbar.
	 The	pop-up	menu	will	be	displayed.
2 Click “Exit”.
	 The	 Virtual	Remote	 Tool	will	be	closed.
Viewing	the	help	file	of	 Virtual	Remote	Tool
•	Displaying	the	help	file	using	the	taskbar
1 Click the Virtual Remote Tool icon  on the taskbar when Virtual Remote Tool is running.
	 The	pop-up	menu	will	be	displayed.
2. Click “Help”.
	 The	Help	screen	will	be	displayed.
•	Displaying	the	help	file	using	the	Start	Menu.
1....

 Controlling the Projector over a LAN (PC Control Utility Pro 4)
Using	the	utility	 software	“PC	 Control	Utility	Pro	4”	included	 on	the	 companion	 NEC	Projector	 CD-ROM,	 the	projec-
tor	can	be	controlled	from	a	computer	over	a	LAN.
Control Functions
Power	 On/Off,	 signal	selection,	 picture	freeze,	 picture	mute,	audio	mute,	 adjusting,	 error	message	 notification,	
event	schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	 provides	 an	outline	 of	preparation	 for	use	 of	PC	 Control...

Install	PC	Control	Utility	Pro	4
Preparation: 
Exit	all	running	 programs	 before	installing	 PC	Control	 Utility	Pro	4.	If	 another	 program	 is	running,	 the	installation	
may	 not	be	completed. 	To	 install	 PC	Control	 Utility	Pro	4,	the	 Windows	 user	account	 must	have	[Administrator]	 privi-
lege	(Windows	7,	 Windows	Vista	and	 Windows	2000)	or	[Computer	Administrator]	privilege	(Windows	XP).
1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.
	 The	folders	in	NEC	Projector...