NEC Np1200 Lcd Projector Users Manual

30
3. Projecting an Image (Basic Operation)
 Optimizing an RGB Image Automatically
Adjusting the Image Using Auto Adjust
Optimizing	an	RGB	image	automatically.
Press	the	AUTO	ADJUST	(AUTO	ADJ.)	button	to	optimize	an	RGB	image	automatically.
This	adjustment	may	be	necessary	when	you	connect	your	computer	for	the	first	time.
[Poor	picture]
[Normal	picture]
Sound	level	from	the	speaker	 and	the	AUDIO	 OUT	
jack	(Stereo	mini)	on	the	projector	can	be	adjusted.
Another	way	to	adjust	volume	is	to	use	the...

31
7 Turning off the Projector
To	turn	off	the	projector:
3. Projecting an Image (Basic Operation)
1. Press the POWER (ON/STAND BY) button on the projector cabi-
net or the POWER OFF button on the remote control. 
	 The	 [POWER	 OFF	/	ARE	 YOU	 SURE?	 /	CARBON	 SAVINGS-	 SES-
SION	0.000[g-CO2]]	message	will	appear.
 
2. Press the ENTER button or press the POWER(ON/STAND BY) or 
the POWER OFF button again.
	 The	 lamp	will	turn	 off	and	 the	projector	 will	go	into	 standby	 mode.	
When	 in	standby	 mode,...

32
 Turning off the Image and Sound
Press	the	AV-MUTE	 button	to	turn	 off	the	 image	 and	sound	 for	a	short	
period	of	time. 	Press	again	to	restore	the	image	and	sound.
NOTE:
•	 Even	though	the	image	is	turned	off,	the	menu	still	remains	on	the	screen.
•	 Sound	from	the	AUDIO	OUT	jack	(Stereo	mini)	can	be	turned	off.
 Freezing a Picture
Press	the	FREEZE	 button	to	freeze	 a	picture. 	Press	 again	to	resume	
motion.
NOTE: The image is frozen but the original video is still playing back.
 Enlarging a...

 Changing Eco Mode
This	feature	enables	you	to	select	two	brightness	modes	of	the	lamp:
OFF	and	ON	modes.	The	lamp	life	can	be	extended	by	turning	on	the	[ECO	MODE].
[ECO	MODE]DescriptionStatus	of	LAMP	indicator
[OFF]This	is	the	default	setting	(100%	Brightness).Off
ST ATUS
LAMP
[ON]Select	
this	mode	 to	increase	 the	lamp	 life	(approx. 	
8 0 %	B r i g h t n e s s	 o n	N P 3 2 0 0	 a n d	a p p r ox . 	8 8 %	
Brightness	on	NP2200/NP1200).
Steady	Green	light
ST ATUS
LAMP
ONOFFAUTO ADJ.
COMPUTER
VIDEO...

 Checking Energy-Saving Effect [CARBON METER]
This	feature	 will	show	 energy-saving	 effect	in	terms	 of	CO2	emission	 reduction	 (kg)	when	 the	projector’s	 [ECO	
MODE]	is	set	to	[ON]. 	This	feature	is	called	as	[CARBON	METER]. 	(→	page	33)
There	are 	two 	messages: 	[TOTAL 	CARBON 	SAVINGS] 	and 	[CARBON 	SAVINGS-SESSION]. 	The 	[TOTAL 	CARBON	
SAVINGS]	 message	shows	the	total	 amount	 of	CO2	emission	 reduction	 from	the	time	 of	shipment	 up	to	now. 	You	
can	check	the	information	on	[USAGE	 TIME]...

 Preventing the Unauthorized Use of the Projector [SECURITY]
A	keyword	 can	be	set	 for	your	 projector	 using	the	Menu	 to	avoid	 operation	 by	an	 unauthorized	 user.	When	 a	key-
word	 is	set,	 turning	 on	the	 projector	 will	display	 the	Keyword	 input	screen. 	Unless	 the	correct	 keyword	 is	entered,	
the	projector	cannot	project	an	image. 	
•	The	[SECURITY]	setting	cannot	be	cancelled	by	using	the	[RESET]	of	the	menu.
To	enable	the	Security	function:
1.  Press the MENU button.
	 The	menu	will	be...

7. Type in the same combination of  buttons and press the ENTER button.
	 The	confirmation	screen	will	be	displayed.
8.  Select [YES] and press the ENTER button.
	 The	SECURITY	function	has	been	enabled.
To	turn	on	the	projector	when	[SECURITY]	is	enabled:
1.  Press and hold the POWER button for about 1 second.
	 The	projector	will	be	turned	on	and	display	a	message	to	the	effect	that	the	projector	is	locked.
2.  Press the MENU button.
3.  Type in the correct keyword and press the ENTER button. The...

To	disable	the	SECURITY	function:
1. Press the MENU button.
	 The	menu	will	be	displayed.
2.   Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button.
	 The	OFF/ON	menu	will	be	displayed.
3. Select [OFF] and press the ENTER button.
	 The	KEYWORD	CONFIRMATION	screen	will	be	displayed.
4.  Type in your keyword and press the ENTER button.
	 When	the	correct	keyword	is	entered,	the	SECURITY	function	will	be	disabled.
NOTE:  If  you  forget  your  keyword,  contact  your  dealer.  Your...

30
30
7 Using the Optional Remote Mouse Receiver (NP01MR)
The	optional	 remote	mouse	receiver	 enables	you	to	operate	 your	computer’s	 mouse	functions	 from	the	remote	 con-
trol.	It	is	a	great	convenience	for	clicking	through	your	computer-generated	presentations.
Connecting	the	remote	mouse	receiver	to	your	computer
If	you	wish	to	use	the	remote	mouse	function,	connect	the	mouse	receiver	and	computer.
The	mouse	receiver	can	be	connected	directly	to	the	computer’s	USB	port	(type	A).
NOTE: Depending on...

Operating	your	computer’s	mouse	from	the	remote	control
You	can	operate	your	computer’s	mouse	from	the	remote	control.
PAGE	/	Button:		
scrolls	the	viewing	 area	of	the	 window	 or	to	move	 to	the	 previous	 or	next	 slide	 in	
PowerPoint	on	your	computer.
	Buttons:	 moves	the	mouse	cursor	on	your	computer.
MOUSE	L-CLICK	Button:	 works	as	the	mouse	left	button.
MOUSE	R-CLICK	Button:	 works	as	the	mouse	right	button.
NOTE:
•	 When	you	operate	 the	computer	 using	the	 or  button with the menu...