Home > NEC > Communications System > NEC Neax 2400 Imx Direct Station Selection Console Manual

NEC Neax 2400 Imx Direct Station Selection Console Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Imx Direct Station Selection Console Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ND-70684 (E) CHAPTER 3
    Page 33
    Revision 1.0
    DATA PROGRAMMING
    Data Programming Procedure for Add-On Module
    MY LINE
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)
    X200 (= D
    term)
    PRIORITY 
    OF 
    ANSWERING 
    CALL
    (PRI)PRIME LINE
    ALLOW 
    OG 
    FROM 
    PRIME
    LINE
    (S)
    0/1MESSAGE
    WAITING
    DATA
    DISPLAY
    SELECTION
    (MWD)
    0/1LINE 
    PREFERENCE
    (LN PRE)LINE
    PREFERENCE
    FOR
    SPEAKER
    BUTTON
    (SPK)
    0 - 3LINE
    PREFERENCE
    FOR
    ANSWER
    BUTTON
    (ANS)
    0 - 2LINE 
    PREFERENCE
    FOR
    OUTGOING
    BUTTON
    (ORG)
    0/1TYPE
    OF
    D
    termTENANT
    NUMBER
    (PL TN)STATION
    NUMBER
    (PL STN)
    0 X 200 (= D
    term)0X0 0−−1
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KY)
    0 - 2FEATURE KEY CODE
    (FKY)
    1 - 320KIND OF 
    LINE
    (KD)
    0 - 2MULTI-LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0 - 7KIND OF
    INCOM
    (CM)
    0 - 2GROUP ID
    NUMBER
    (G-ID)
    1 - 50
    9XXXXXXXX
    10XXXXXXXX
    11XXXXXXXX
    12XXXXXXXX
    13XXXXXXXX
    14XXXXXXXX
    15XXXXXXXX
    16XXXXXXXX
    17XXXXXXXX
    18XXXXXXXX
    19XXXXXXXX
    20XXXXXXXX
    21XXXXXXXX
    22XXXXXXXX
    23XXXXXXXX
    24XXXXXXXX
    25XXXXXXXX
    26XXXXXXXX
    27XXXXXXXX
    28XXXXXXXX
    29XXXXXXXX
    30XXXXXXXX
    31XXXXXXXX
    32XXXXXXXX 
    						
    							CHAPTER 3 ND-70684 (E)
    Page 34
    Revision 1.0
    DATA PROGRAMMING
    Data Programming Procedure for Add-On Module
    Note:
    *Buttons 1-40 are assignable / **Assignment of Line/Feature access keys (KYNs 1-16) on Dterm “200” /
    **Assignment of Line/Feature access keys (KYNs 1-24) on Add-On Module “201”
    MY LINE
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)
    X200 (= D
    term)
    PRIORITY 
    OF 
    ANSWERING 
    CALL
    (PRI)PRIME LINE
    ALLOW 
    OG 
    FROM 
    PRIME
    LINE
    (S)
    0/1MESSAGE
    WAITING
    DATA
    DISPLAY
    SELECTION
    (MWD)
    0/1LINE 
    PREFERENCE
    (LN PRE)LINE
    PREFERENCE
    FOR
    SPEAKER
    BUTTON
    (SPK)
    0 - 3LINE
    PREFERENCE
    FOR
    ANSWER
    BUTTON
    (ANS)
    0 - 2LINE 
    PREFERENCE
    FOR
    OUTGOING
    BUTTON
    (ORG)
    0/1TYPE
    OF
    D
    termTENANT
    NUMBER
    (PL TN)STATION
    NUMBER
    (PL STN)
    0 X 200 (= Dterm)
    0X0 0−−1
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KY)
    0 - 2FEATURE KEY CODE
    (FKY)
    1 - 320KIND OF 
    LINE
    (KD)
    0 - 2MULTI-LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0 - 7KIND OF
    INCOM
    (CM)
    0 - 2GROUP ID
    NUMBER
    (G-ID)
    1 - 50
    33XXXXXXXX
    34XXXXXXXX
    35XXXXXXXX
    36XXXXXXXX
    37XXXXXXXX
    38XXXXXXXX
    39XXXXXXXX
    40XXXXXXXX 
    						
    							ND-70684 (E) CHAPTER 3
    Page 35
    Revision 1.0
    DATA PROGRAMMING
    Data Programming Procedure for Add-On Module
    For Line/Feature access keys: KYNs 25-60 (Add-On Module)
    MY LINE
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)
    X201 (= Add-
    On Module)
    PRIORITY 
    FOR 
    ANSWERING 
    CALL
    (PRI)PRIME LINE
    ALLOW 
    OG 
    FROM 
    PRIME
    LINE
    (S)
    0/1MESSAGE
    WAITING
    DATA
    DISPLAY
    SELECTION
    (MWD)
    0/1LINE 
    PREFERENCE
    (LN PRE)LINE
    PREFERENCE
    FOR
    SPEAKER
    BUTTON
    (SPK)
    0 - 3
    LINE
    PREFERENCE
    FOR
    ANSWER
    BUTTON
    (ANS)
    0 - 2LINE 
    PREFERENCE
    FOR
    OUTGOING
    BUTTON
    (ORG)
    0/1TYPE
    OF
    D
    termTENANT
    NUMBER
    (PL TN)STATION
    NUMBER
    (PL STN)
    0X201 (= Add-
    On Module)
    0X0 0−−1
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KY)
    0 - 2FEATURE KEY CODE
    (FKY)
    1 - 320KIND OF 
    LINE
    (KD)
    0 - 2MULTI-LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0 - 7KIND OF
    INCOM
    (CM)
    0 - 2GROUP ID
    NUMBER
    (G-ID)
    1 - 50
    12 (= Multi Line)−0 (= Line)X201 (Add-on 
    Module)X−−
    2
    3
    4
    5XXXXXXXX
    6XXXXXXXX
    7XXXXXXXX
    8XXXXXXXX
    9XXXXXXXX
    10XXXXXXXX
    11XXXXXXXX
    12XXXXXXXX
    13XXXXXXXX
    14XXXXXXXX
    15XXXXXXXX
    16XXXXXXXX
    17XXXXXXXX
    18XXXXXXXX
    19XXXXXXXX
    20XXXXXXXX
    21XXXXXXXX
    22XXXXXXXX
    23XXXXXXXX 
    						
    							CHAPTER 3 ND-70684 (E)
    Page 36
    Revision 1.0
    DATA PROGRAMMING
    Data Programming Procedure for Add-On Module
    MY LINE
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)
    X201 (= Add-
    On Module)
    PRIORITY 
    FOR 
    ANSWERING 
    CALL
    (PRI)PRIME LINE
    ALLOW 
    OG 
    FROM 
    PRIME
    LINE
    (S)
    0/1MESSAGE
    WAITING
    DATA
    DISPLAY
    SELECTION
    (MWD)
    0/1LINE 
    PREFERENCE
    (LN PRE)LINE
    PREFERENCE
    FOR
    SPEAKER
    BUTTON
    (SPK)
    0 - 3LINE
    PREFERENCE
    FOR
    ANSWER
    BUTTON
    (ANS)
    0 - 2LINE 
    PREFERENCE
    FOR
    OUTGOING
    BUTTON
    (ORG)
    0/1TYPE
    OF
    D
    termTENANT
    NUMBER
    (PL TN)STATION
    NUMBER
    (PL STN)
    0X201 (= Add-
    On Module)
    0X0 0−−1
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KY)
    0 - 2FEATURE KEY CODE
    (FKY)
    1 - 320KIND OF 
    LINE
    (KD)
    0 - 2MULTI LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0 - 7KIND OF
    INCOM
    (CM)
    0 - 2GROUP ID
    NUMBER
    (G-ID)
    1 - 50
    24XXXXXXXX
    25XXXXXXXX
    26XXXXXXXX
    27XXXXXXXX
    28XXXXXXXX
    29XXXXXXXX
    30XXXXXXXX
    31XXXXXXXX
    32XXXXXXXX
    33XXXXXXXX
    34XXXXXXXX
    35XXXXXXXX
    36XXXXXXXX
    37XXXXXXXX
    38XXXXXXXX
    39XXXXXXXX
    40XXXXXXXX 
    						
    							ND-70684 (E) CHAPTER 3
    Page 37
    Revision 1.0
    DATA PROGRAMMING
    Office Data Setting Sheets
    5. Office Data Setting Sheets
    This section contains blank data setting sheets for commands used by DSS. You can use these sheets to plan
    your data before installing the DSS.
    5.1 ASDT
    TENANT
    NUMBER
    (TN) 
    1-63STATION
    NUMBER
    (STN)
    5 DIGITSLINE EQUIPMENT NUMBER
    (LENS)TELEPHONE
    EQUIPMENT
    CLASS 
    (TEC)
    1-31ROUTE
    RESTRICTION
    CLASS 
    (RSC)
    0-15SERVICE
    FEATURE 
    CLASS 
    (SFC)
    0-15MAKE BUSY
    INFORMATION
    (MB)
    0/1REMARKS
    MG U G LV 
    						
    							CHAPTER 3 ND-70684 (E)
    Page 38
    Revision 1.0
    DATA PROGRAMMING
    Office Data Setting Sheets
    5.2 AKYD
    MY LINE
    TENANT
    NUMBER
    (TN)STATION NUMBER 
    (STN)
    PRIORITY
    FOR
    ANSWERING
    CALL
    (PRI)
    0-4PRIME LINE ALLOW 
    OG
    FROM
    PRIME
    LINE
    (S)
    0/1MESSAGE
    WAITING
    DATA
    DISPLAY
    SELECTION
    (MWD)
    0/1LINE
    PREFERENCE
    (LN PRE)
    0/1LINE
    PREFERENCE
    FOR SPEAKER
    BUTTON
    (SPK)
    0-3LINE
    PREFERENCE
    FOR ANSWER
    BUTTON
    (ANS)
    0-2LINE
    PREFERENCE
    FOR
    OUTGOING
    BUTTON
    (ORG)
    0/1TYPE OF
    D
    term
    (TP)
    0-3 TENANT
    NUMBER
    (PL TN)STATION
    NUMBER
    (PL STN)
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KYI) 
    0 – 2FEATURE
    KEY CODE
    (FKY)
    1-320KIND OF
    LINE
    (KD)
    0-2MULTI LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0-7KIND OF
    INCOM
    (ICM)
    0-2GROUP
    ID
    NUMBER
    (G-ID)
    1-50
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26 
    						
    							ND-70684 (E) CHAPTER 3
    Page 39
    Revision 1.0
    DATA PROGRAMMING
    Office Data Setting Sheets
    Note 1:
    When KYI = None, it is not necessary to assign any data.
    Note 2:When KYI = FUNCTION, assign data for FKY only.
    Note 3:When KYI = Multi-Line, assign data for multiple telephone only.
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KYI) 
    0 – 2FEATURE
    KEY CODE
    (FKY)
    1-320KIND OF
    LINE
    (KD)
    0-2MULTI LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0-7KIND OF
    INCOM
    (ICM)
    0-2GROUP 
    ID
    NUMBER
    (G-ID)
    1-50
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    F1
    F2
    F3
    F4
    F5
    F6
    F7
    F8 
    						
    							CHAPTER 3 ND-70684 (E)
    Page 40
    Revision 1.0
    DATA PROGRAMMING
    Office Data Setting Sheets
    MY LINE
    TENANT
    NUMBER
    (TN)STATION NUMBER 
    (STN)
    PRIORITY
    FOR
    ANSWERING
    CALL
    (PRI)
    0-4PRIME LINE ALLOW 
    OG
    FROM
    PRIME
    LINE
    (S)
    0/1MESSAGE
    WAITING
    DATA
    DISPLAY
    SELECTION
    (MWD)
    0/1LINE
    PREFERENCE
    (LN PRE)
    0/1LINE
    PREFERENCE
    FOR SPEAKER
    BUTTON
    (SPK)
    0-3LINE
    PREFERENCE
    FOR ANSWER
    BUTTON
    (ANS)
    0-2LINE
    PREFERENCE
    FOR
    OUTGOING
    BUTTON
    (ORG)
    0/1TYPE OF
    D
    term
    (TP)
    0-3 TENANT
    NUMBER
    (PL TN)STATION
    NUMBER
    (PL STN)
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KYI) 
    0 – 2FEATURE
    KEY CODE
    (FKY)
    1-320KIND OF
    LINE
    (KD)
    0-2MULTI LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0-7KIND OF
    INCOM
    (ICM)
    0-2GROUP ID
    NUMBER
    (G-ID)
    1-50
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26 
    						
    							ND-70684 (E) CHAPTER 3
    Page 41
    Revision 1.0
    DATA PROGRAMMING
    Office Data Setting Sheets
    Note 1:
    When KYI = None, it is not necessary to assign any data.
    Note 2:When KYI =FUNCTION, assign data for FKY only.
    Note 3:When KYI = Multi-Line, assign data for multiple telephone only.
    KEY
    NUMBER
    (KYN)SERVICE
    CONDITION
    (KYI) 
    0 – 2FEATURE
    KEY CODE
    (FKY)
    1-320KIND OF
    LINE
    (KD)
    0-2MULTI LINE INTERCOM
    TENANT
    NUMBER
    (TN)STATION
    NUMBER
    (STN)RING
    INFORMATION
    FOR
    EACH LINE
    (RG)
    0-7KIND OF
    INCOM
    (ICM)
    0-2GROUP ID
    NUMBER
    (G-ID)
    1-50
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    F1
    F2
    F3
    F4
    F5
    F6
    F7
    F8 
    						
    							CHAPTER 3 ND-70684 (E)
    Page 42
    Revision 1.0
    This page is for your notes. 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Imx Direct Station Selection Console Manual