NEC Neax 2400 Imx Direct Station Selection Console Manual
Have a look at the manual NEC Neax 2400 Imx Direct Station Selection Console Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ND-70684 (E) CHAPTER 3 Page 23 Revision 1.0 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) 2.1 Example of Data Programming for DSS/BLF 2.1.1 ASDT Note: *0 = Even-numbered LEN level / **1 = Odd-numbered LEN level TENANT NUMBER (TN) 1-63STATION NUMBER (STN) Max. 5 DigitsLINE EQUIPMENT NUMBER (LENS)TELEPHONE EQUIPMENT CLASS (TEC) 1-31ROUTE RESTRICTION CLASS (RSC) 0-15SERVICE FEATURE CLASS (SFC) 0-15REMARKS MG U G LV X 200 0 0 0 1 0 *0 12×× For DSS/BLF 201 0 0 0 1 0 **1 12×× For DSS/BLF 400 0 0 0 1 0 7 12××For Associated D term
CHAPTER 3 ND-70684 (E) Page 24 Revision 1.0 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) 2.1.2 AKYD The following table shows DSS key assignment for even-numbered LV (2n). MY LINE TENANT NUMBER (TN)STATION NUMBER (STN) X200 PRIORITY FOR ANSWERING CALL (PRI) 0 - 4PRIME LINE ALLOW OG FROM PRIME LINE (S) 0/1MESSAGE WAITING DATA DISPLAY SELECTION (MWD) 0/1LINE PREFERENCE (LN PRE) 0/1LINE PREFERENCE FOR SPEAKER BUTTON (SPK) 0 - 3LINE PREFERENCE FOR ANSWER BUTTON (ANS) 0 - 2LINE PREFERENCE FOR OUTGOING BUTTON (ORG) 0/1TYPE OF D term (TP) 0 - 3 TENANT NUMBER (PL TN)STATION NUMBER (PL ST) 0 X 400 (= D term)0 X 0 0 _ _ 1 KEY NUMBER (KYN) 1-16SERVICE CONDITION (KY) 0 - 2FEATURE KEY CODE (FKY) 1 - 320KIND OF LINE (KD) 0 - 2MULTI-LINE INTERCOM TENANT NUMBER (TN) 1-15STATION NUMBER (STN)RING INFORMATION FOR EACH LINE (RG) 0-7KIND OF INTERCOM (ICM) 0 - 2GROUP ID NUMBER (G-ID) 1 - 50 1 2 (= Multi Line)−0 (= Line) X200X−− 2 2 (= Multi Line)−0 (= Line) X400 (Dterm)X−− 3 4 5 6 7 8 9 10 2 (= Multi Line) −2 (= DSS) XX−− − 11 2 (= Multi Line)−2 (= DSS) XX−− − 12 2 (= Multi Line)−2 (= DSS) XX−− − 13 2 (= Multi Line)−2 (= DSS) XX−− − 14 2 (= Multi Line)−2 (= DSS) XX−− − 15 2 (= Multi Line)−2 (= DSS) XX−− − 16 2 (= Multi Line)−2 (= DSS) XX−− − 17 2 (= Multi Line)−2 (= DSS) XX−− − 18 2 (= Multi Line)−2 (= DSS) XX−− − 19 2 (= Multi Line)−2 (= DSS) XX−− − 20 2 (= Multi Line)−2 (= DSS) XX−− − 212 (= Multi Line)−2 (= DSS) XX−− − 222 (= Multi Line)−2 (= DSS) XX−− − 232 (= Multi Line)−2 (=DSS) XX−− −
ND-70684 (E) CHAPTER 3 Page 25 Revision 1.0 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) MY LINE TENANT NUMBER (TN)STATION NUMBER (STN) X200 PRIORITY FOR ANSWERING CALL (PRI) 0 - 4PRIME LINE ALLOW OG FROM PRIME LINE (S) 0/1MESSAGE WAITING DATA DISPLAY SELECTION (MWD) 0/1LINE PREFERENCE (LN PRE)LINE PREFERENCE FOR SPEAKER BUTTON (SPK) 0 - 3LINE PREFERENCE FOR ANSWER BUTTON (ANS) 0 - 2LINE PREFERENCE FOR OUTGOING BUTTON (ORG) 0/1TYPE OF D term (TP) 0 -3 TENANT NUMBER (PL TN)STATION NUMBER (PL ST) 0 X 400 (= D term)0 X 0 0 _ _ 1 KEY NUMBER (KYN) 1-16SERVICE CONDITION (KY) 0 - 2FEATURE KEY CODE (FKY) 1 - 320KIND OF LINE (KD) 0 - 2MULTI-LINE INTERCOM TENANT NUMBER (TN)STATION NUMBER (STN)RING INFORMATION FOR EACH LINE (RG)KIND OF INTERCOM (ICM) 0 - 2GROUP ID NUMBER (G-ID) 1 - 50 242 (= Multi Line)−2 (= DSS)XX−− − 252 (= Multi Line)−2 (= DSS) XX−− − 262 (= Multi Line)−2 (= DSS) XX−− − 272 (= Multi Line)−2 (= DSS) XX−− − 282 (= Multi Line)−2 (= DSS) XX−− − 292 (= Multi Line)−2 (= DSS) XX−− − 302 (= Multi Line)−2 (= DSS) XX−− − 312 (= Multi Line)−2 (= DSS) XX−− − 322 (= Multi Line)−2 (= DSS) XX−− − 332 (= Multi Line)−2 (= DSS) XX−− − 342 (= Multi Line)−2 (= DSS) XX−− − 352 (= Multi Line)−2 (= DSS) XX−− − 362 (= Multi Line)−2 (= DSS) XX−− − 372 (= Multi Line)−2 (= DSS) XX−− − 382 (= Multi Line)−2 (= DSS) XX−− − 392 (= Multi Line)−2 (= DSS) XX−− −
CHAPTER 3 ND-70684 (E) Page 26 Revision 1.0 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) The following table shows DSS key assignment for odd-numbered LV (2n + 1) MY LINE TENANT NUMBER (TN)STATION NUMBER (STN) X201 PRIORITY FOR ANSWERING CALL (PRI) 0 - 4PRIME LINE ALLOW OG FROM PRIME LINE (S) 0/1MESSAGE WAITING DATA DISPLAY SELECTION (MWD) 0/1LINE PREFERENCE (LN PRE) 0/1LINE PREFERENCE FOR SPEAKER BUTTON (SPK) 0 - 3LINE PREFERENCE FOR ANSWER BUTTON (ANS) 0 - 2LINE PREFERENCE FOR OUTGOING BUTTON (ORG) 0/1TYPE OF D term (TP) 0 - 3 TENANT NUMBER (PL TN)STATION NUMBER (PL STN) 0 X 400 (=D term)0X 0 0−−1 KEY NUMBER (KYN) 1-16SERVICE CONDITION (KY) 0 - 2FEATURE KEY CODE (FKY) 1 - 320KIND OF LINE (KD) 0 - 2MULTI-LINE INTERCOM TENANT NUMBER (TN)STATION NUMBER (STN)RING INFORMATION FOR EACH LINE (RG) 0-7KIND OF INTERCOM (ICM) 0 - 2GROUP ID NUMBER (G-ID) 1 - 50 1 2 (= Multi Line)−0 (= Line) X200X−− 2 2 (= Multi Line)−0 (= Line) X400 (Dterm)X−− 3 4 5 6 7 8 9 10 2 (= Multi Line)−2 (= DSS) XX−− − 11 2 (= Multi Line)−2 (= DSS) XX−− − 12 2 (= Multi Line)−2 (= DSS) XX−− − 13 2 (= Multi Line)−2 (= DSS) XX−− − 14 2 (= Multi Line)−2 (= DSS) XX−− − 15 2 (= Multi Line)−2 (= DSS) XX−− − 16 2 (= Multi Line)−2 (= DSS) XX−− − 17 2 (= Multi Line)−2 (= DSS) XX−− − 18 2 (= Multi Line)−2 (= DSS) XX−− − 19 2 (= Multi Line)−2 (= DSS) XX−− − 20 2 (= Multi Line)−2 (= DSS) XX−− − 212 (= Multi Line)−2 (= DSS) XX−− − 222 (= Multi Line)−2 (= DSS) XX−− − 232 (= Multi Line)−2 (=DSS) XX−− −
ND-70684 (E) CHAPTER 3 Page 27 Revision 1.0 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) MY LINE TENANT NUMBER (TN)STATION NUMBER (STN) X200 PRIORITY FOR ANSWERING CALL (PRI) 0 - 4PRIME LINE ALLOW OG FROM PRIME LINE (S) 0/1MESSAGE WAITING DATA DISPLAY SELECTION (MWD) 0/1LINE PREFERENCE (LN PRE)LINE PREFERENCE FOR SPEAKER BUTTON (SPK) 0 - 3LINE PREFERENCE FOR ANSWER BUTTON (ANS) 0 - 2LINE PREFERENCE FOR OUTGOING BUTTON (ORG) 0/1TYPE OF D term (TP) 0 -3 TENANT NUMBER (PL TN)STATION NUMBER (PL ST) 0 X 400 (=D term)0X 0 0−−1 KEY NUMBER (KYN) 1-16SERVICE CONDITION (KY) 0 - 2FEATURE KEY CODE (FKY) 1 - 320KIND OF LINE (KD) 0 - 2MULTI-LINE INTERCOM TENANT NUMBER (TN)STATION NUMBER (STN)RING INFORMATION FOR EACH LINE (RG)KIND OF INTERCOM (ICM) 0 - 2GROUP ID NUMBER (G-ID) 1 - 50 242 (= Multi Line)−2 (= DSS) XX−− − 252 (= Multi Line)−2 (= DSS) XX−− − 262 (= Multi Line)−2 (= DSS) XX−− − 272 (= Multi Line)−2 (= DSS) XX−− − 282 (= Multi Line)−2 (= DSS) XX−− − 292 (= Multi Line)−2 (= DSS) XX−− − 302 (= Multi Line)−2 (= DSS) XX−− − 312 (= Multi Line)−2 (= DSS) XX−− − 322 (= Multi Line)−2 (= DSS) XX−− − 332 (= Multi Line)−2 (= DSS) XX−− − 342 (= Multi Line)−2 (= DSS) XX−− − 352 (= Multi Line)−2 (= DSS) XX−− − 362 (= Multi Line)−2 (= DSS) XX−− − 372 (= Multi Line)−2 (= DSS) XX−− − 382 (= Multi Line)−2 (= DSS) XX−− − 392 (= Multi Line)−2 (= DSS) XX−− −
CHAPTER 3 ND-70684 (E) Page 28 Revision 1.0 DATA PROGRAMMING Add-On Module 3. Add-On Module This section covers how to assign an Add-On Module. In Figure 3-3, an Add-On Module and the associated D term are assigned as follows: Figure 3-3 Example of Data Programming for Add-On Module TERMINAL LINE EQUIPMENT NUMBER (LEN) STATION NUMBER (ST) Add-On Module 000101201 Note D term000100 200 2n+1 2nLV 7 6 5 4 3 2 1 0 ELC Note:Station number 201 is only used to assign Line/Feature access keys for the Add-On Module. Accordingly, these numbers are not used when operating the Add-On Module. 000504030201 545958575655485352515049424746454443364140393837303534333231242928272625182322212019121716151413061110090807 1234567890# Dterm (STN 200) Add-On Module
ND-70684 (E) CHAPTER 3 Page 29 Revision 1.0 DATA PROGRAMMING Data Programming Procedure for Add-On Module 4. Data Programming Procedure for Add-On Module When assigning Add-On Module data, perform the following procedure. “X” indicates the value should be tai- lored to the existing system. STEP 1: ASDT Assign a D term to an even-numbered LEN level. (In this example, LV 0 is used.) Assign the Add-On Module to the subsequent odd-numbered LEN level. (In this example LV 1 is used.) STEP 2: AKYD Assign Line/Feature access keys to the Add-On Module. The upper 24 Line/Feature access keys be- long to the associated D term and the remaining lower 36 Line/Feature access keys belong to the Add- On Module. Use the associated D term port to assign information for the Dterm and first 24 keys on the ADM. TN : X STN : 201 LEN : 0 0 0 1 0 1 Odd-numbered LEN level TEC : 1 2 Fixed RSC : X SFC : X TN : X STN : 200 TP : 1 Buttons 1-39 are assignable PRI : 0 PL TN : X PL STN : 200 S : 0 = Off Hook Suppression is off MWD : X LN PRE : 0 = Prime Line Pickup KYN : 1-16 For D term 17-40 Correspond to KYNs (1-24) on the Add-On Module KY1 : X KD : X TN : X STN : XXXX RG : X ICM : X G-ID : X
CHAPTER 3 ND-70684 (E) Page 30 Revision 1.0 DATA PROGRAMMING Data Programming Procedure for Add-On Module Use the Add-On Module port to assign key information for the last 36 keys on the ADM. TN : X STN : 201 TP : 1 Buttons 1-39 are assignable PRI : 0 PL TN : X PL STN : 200 Enter the associated D term as a PL STN S : 0 = Off Hook Suppression is off MWD : X LN PRE : 0 = Prime Line Pickup KYN : 5-40 Corresponds to KYNs 25-60 on the Add-On Module KYI : X KD : X TN : X STN : XXXX RG : X ICM : X G-ID : X
ND-70684 (E) CHAPTER 3 Page 31 Revision 1.0 DATA PROGRAMMING Data Programming Procedure for Add-On Module Figure 3-4 DSS Key Assignment for Add-On Module 000504030201 545958575655 485352515049 424746454443 364140393837 303534333231 242928272625 182322212019 121716151413 061110090807 Use KYNs 5-40 of the Add-On Module for programming the remaining 36 Line/Feature access keys on the Add- On Module.Use KYNs 17-40 of the associated D term for programming the first 24 Line/Feature access keys on the Add-On Module.
CHAPTER 3 ND-70684 (E) Page 32 Revision 1.0 DATA PROGRAMMING Data Programming Procedure for Add-On Module 4.1 Example of Data Programming for Add-On Module 4.1.1 ASDT Note: *0 = Even numbered LEN level / **1 = Odd numbered LEN level 4.1.2 AKYD For Line/Feature access keys: KYNs 1 - 24 (Dterm) TENANT NUMBER (TN) 1-63STATION NUMBER (STN) Max. 5 DigitsLINE EQUIPMENT NUMBER (LENS)TELEPHONE EQUIPMENT CLASS (TEC) 1-31ROUTE RESTRICTION CLASS (RSC) 0-15SERVICE FEATURE CLASS (SFC) 0-15REMARKS MG U G LV X 200 0 001 0*0XXXFor Dterm 201 0 0 0 1 0 **1XXXFor Add-On Module MY LINE TENANT NUMBER (TN)STATION NUMBER (STN) X200 (= D term) PRIORITY FOR ANSWERING CALL (PRI)PRIME LINE ALLOW OG FROM PRIME LINE (S) 0/1MESSAGE WAITING DATA DISPLAY SELECTION (MWD) 0/1LINE PREFERENCE (LN PRE) 0/1LINE PREFERENCE FOR SPEAKER BUTTON (SPK) 0 - 3LINE PREFERENCE FOR ANSWER BUTTON (ANS) 0 - 2LINE PREFERENCE FOR OUTGOING BUTTON (ORG) 0/1TYPE OF D termTENANT NUMBER (PL TN)STATION NUMBER (PL STN) 0 X 200 (= D term)0X0 0−−1 KEY NUMBER (KYN)SERVICE CONDITION (KY) 0 - 2FEATURE KEY CODE (FKY) 1 - 320KIND OF LINE (KD) 0 - 2MULTI-LINE INTERCOM TENANT NUMBER (TN)STATION NUMBER (STN)RING INFORMATION FOR EACH LINE (RG) 0 - 7KIND OF INCOM (CM) 0 - 2GROUP ID NUMBER (G-ID) 1 - 50 12X0 1 200XXX 2XXXXXXXX 3XXXXXXXX 4XXXXXXXX 5XXXXXXXX 6XXXXXXXX 7XXXXXXXX 8XXXXXXXX