NEC Neax 2000 Ivs2 Wcs Features And Specifications

CALL FORWARDING-NOT AVAILABLE
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 6NDA-24274, Issue 1.0
CALL FORWARDING-NOT AVAILABLE
General Description
When a PS is power off or out of zone, a call directed to the PS is forwarded to a VMS, and a voice mail message
can be recorded to the VMS and checked from the PS. Also the VMS can page the PSautomatically after the
voice mail message is recorded.
Configuration Application
IVS Wired for Wireless
Operating Procedure
To set Call...

CALL FORWARDING-NOT AVAILABLE
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 7
Service Conditions
1. After an incoming call to a “Not Available-PS” is forwarded, if the PS becomes available (power on or goes
into zone), the PS can originate or receive a call even if the pervious incoming call is connected to the VMS.
2. This feature has a priority to Announcement PS-No Answer/PS-Out of Zone features.
3. A maximum of three digits can be used for the access codes...

CCIS INTERFACE
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 8NDA-24274, Issue 1.0
CCIS INTERFACE
General Description
This feature allows the IVS-WCS to be integrated with NEC PBXs with CCIS interface.
Configuration Application
PBX Adjunct (CCIS)
Operating Procedure
To place a call using Overlap Dialing:
1. Press the L1 or L2 key and receive extension dial tone.
2. Dial the desired number and receive ringback tone.
To place a call using Preset Dialing:
Dial the desired number, then...

CCIS INTERFACE
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 9
To transfer the call in progress:
1. While connected to the first party, press the TRF key and receive Feature Dial Tone. The number displayed
on the LCD is cleared. If the PBX provides the service, the held party hears Music on Hold.
2. Dial the third party number and receive ringback tone. The number is displayed.
3. Press the END key before the third party answers. The first and third parties will...

CALLING NAME DISPLAY - PS
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 10NDA-24274, Issue 1.0
CALLING NAME DISPLAY - PS
General Description
Without answering incoming calls or hold calls terminates to the DtermPSII, the calling party’s name can be
confirmed by the indications on the LCD.
Configuration Application
IVS Wired for Wireless and PBX Adjunct with CCIS interface
Operating Procedure
No manual operation is required.
Service Conditions
1. One of the followings is displayed on...

CALLING NUMBER DISPLAY - PS
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 11
CALLING NUMBER DISPLAY - PS
General Description
This feature provides a display on the LCD of a DtermPSII receiving a call, indicating the station number.
Configuration Application
IVS Wired for Wireless and PBX Adjunct with CCIS interface
Operating Procedure
No manual operation is required.
Service Conditions
1. For internal or CCIS incoming calls, the calling extension number will be...

DTMF SIGNAL SENDER
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 12NDA-24274, Issue 1.0
DTMF SIGNAL SENDER
General Description
ThisfeatureallowsaDtermPSII user to send the DTMF signal (tone) to the called party (terminal, voice mail
system, etc.) while engaged in communication.
Configuration Application
IVS Wired for Wireless and PBX Adjunct
Operating Procedure
To send the DTMF signal:
While engaged in communication, press a digit key. The IVS-WCS automatically sends the...

GROUP CALL-AUTOMATIC CONFERENCE (6/10-PARTY)
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 13
GROUP CALL-AUTOMATIC CONFERENCE (6/10-PARTY)
General Description
This feature permits a DtermPSII user, Dtermuser or Single Line Telephone user within the system to establish
a conference among as many as six or ten parties. From a DtermPSII/Dterm/Single Line Telephone, a maximum
of nine PSs can be paged simultaneously except the conference leader. The PSs are assigned...

GROUP CALL-AUTOMATIC CONFERENCE (6/10-PARTY)
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
Page 14NDA-24274, Issue 1.0
Service Conditions
1. A maximum of nine stations are paged simultaneously except the conference leader.
Even if more than nine stations are assigned to one group except the leader, the first nine stations are paged
in order of registered number on the system data.
2. Single Line Telephones, D
terms, DtermPSIIs can be assigned as the stations within the conference groups...

GROUP CALL-AUTOMATIC CONFERENCE (6/10-PARTY)
NEAX2000 IVS2
WCS Features and Specifications (for Dterm
PSII)
NDA-24274, Issue 1.0
Page 15
10. If a conference leader left from the conference once, he can re-participate by dialing the re-participation
access code or by pressing the feature access key (Dtermonly) while the conference is in progress andwhen
the CFT trunk has an idle circuit.
11. A station can be paged while idle state. When the station is busy at the time of paging, the station cannot be...