NEC Neax 2000 Ivs2 General Description Manual

  Regulatory Information Industry Canada CS-03
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Pag e xix
Before installing the equipment, users should ensure that it is permissible to be 
connected to the facilities of the local telecommunications company. The equipment 
must also be installed using an acceptable method of connection. In some cases, the
companys inside wiring associated with a single line individual service may be 
extended by means of a certified connector assembly (telephone...

NEAX2000 IVS2 General Description
Page xxNDA-24293, Issue 2
Safety Certifications   Regulatory Information
Safety Certifications
This equipment has been listed by Underwriters Laboratories and found to comply
with all the applicable requirements of the standard for telephone equipment U.L.
1459. This equipment complies with Canadian Standards Associations standard
C 22.2 No. 225.
Safety 
ConsiderationsWhen using telephone equipment, basic safety precautions should always be followed
to reduce the risk of...

  Regulatory Information Safety Instructions
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Pag e xxi
Safety Instructions
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
3. Never touch un-insulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
5. Read and...

NEAX2000 IVS2 General Description
Page xxiiNDA-24293, Issue 2
Safety Instructions   Regulatory Information
17. Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a.) When the power supply cord or plug is damaged or frayed.
b.) If liquid has been spilled into the product.
c.) If the product has been exposed to rain or water.
d.) If the product does not operate normally by following the operating
instructions. Adjust only those...

NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 1
Chapter 1 Introduction
This manual provides an overview of the NEAX2000 IVS2 (Integrated Voice Server2)
stored program control digital electronic PBX. An introduction to the technical
characteristics is included, along with a description of available system applications.
System Overview
The NEAX2000 IVS2 is a full-featured PBX providing a rich feature set of both Key
and PBX features. It is positioned to provide a more cost effective solution...

NEAX2000 IVS2 General Description
Page 2NDA-24293, Issue 2
System OverviewChapter 1  Introduction
The NEAX2000 IVS2 is based on a universal port concept. A total of 768 ports can be
equipped, a maximum of 512 stations/analog trunks plus 256 Virtual extensions.
These ports support D
term Series III/E, Electra Elite, Dterm Cordless, and Dterm PSII
(Wireless) Multiline Terminals, single line telephones, outside lines, and other circuits
and devices. While port assignment is flexible, the maximum capacities...

Chapter 1  IntroductionFeature Overview
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 3
Feature Overview
The Primary design objective of our NEAX2000 IVS2 is to offer affordable
communications and features designed to enhance your company’s performance. A
comprehensive feature package is provided including both business and Hotel/Motel
features. 
 Business – concentrates on call processing to streamline daily business
communication operations.
 Hotel/Motel – designed to provide your...

NEAX2000 IVS2 General Description
Page 4NDA-24293, Issue 2
Hardware Architecture Chapter 1  Introduction
Hardware Architecture
The NEAX2000 IVS2 employs the latest advancements in Large Scale Integration
(LSI) circuits and component manufacturing techniques to create a highly reliable and
serviceable communications system.
The NEAX2000 IVS
2 architecture consists of three major functional components:
Distributed Controller, Digital Switching Network, and Port Interface.
1.Distributed Controller 
The...

Chapter 1  Introduction Software Architecture
NEAX2000 IVS2 General Description
NDA-24293, Issue 2
Page 5
CablingAs more and more computers and communications devices use twisted-pair
technology, the use of today’s cabling systems continues to rise. This is of special
concern when the customers’ needs require that the cabling system be expanded
where facilities are close to their capacity. The NEAX2000 IVS
2 provides solutions
that significantly reduce overall cabling requirements.
The D
term Series III...

NEAX2000 IVS2 General Description
Page 6NDA-24293, Issue 2
Software Architecture Chapter 1  Introduction
Feature PackagesThe NEAX2000 IVS2 introduces a new software and hardware approach, which is
designed with modularity in mind. This approach allows customers a greater degree of
cost control for new installations and for upgrades.
Feature Package 
DesignationsThe NEAX2000 IVS2 basic operation requires Basic Business/HM Software. In
addition to the Basic Software there are several Feature Packages, each...