NEC Nc1600c Dlp Cinema Projector Users Manual

11
1. What’s in the Box? and the Names of the Projector Parts
1-3-3. Connection terminals
SDI-ASDI-B D
VI-ADV I - B GPI/O
LAN-A LAN-B
REMOTE IN RS-232C
PC CARD
USB
CINEMA
SYSTEM
1
11
109
8
76
2345
1. HDSDI A input terminal (SDI-A) (BNC)
Connect a Video Server of Video source to this terminal. Use a 75 Ω coaxial cable.
2. HDSDI B input terminal (SDI-B) (BNC)
Connect a Video Server or Video source to this terminal. Use a 75 Ω coaxial cable.
3. DVI-D A input terminal (DVI-A) (DVI-D 24P)
Connect the DVI-D...

1. What’s in the Box? and the Names of the Projector Parts
12
1-3-4. Control panel
MMS
STATUS
12 8 9
13
12
111420 21181956717
16
15
3
410
1. Remote control light reception unit
This receives signals from the remote control.
2. BACKLIGHT button
Operate this button to turn on/off the back light of the LCD screen and operation panel.
3. MMS STATUS indicator
This indicates the link status of the optional multi-media switcher (MM\
S).
Off 
Green lighting 
Orange lighting 
Green or Orange blinking
Red...

13
1. What’s in the Box? and the Names of the Projector Parts
9. 1 to 8 buttons
Press the 1 to 8 buttons while depressing the CTL (MACRO) button to select titles (input signals) assig\
ned to each button.
To this projector, 100 titles at most can be registered (input signal registration). Among the registered titles, any 8 titles  can
be assigned to the buttons  to .
The indicator to the left of the buttons show the assigned/selected stat\
us of titles.
Green lighting
Orange lighting
OffWhen any title...

1. What’s in the Box? and the Names of the Projector Parts
14
1-4. Names on the Remote Control
1. POWER ON button
Operate this button to turn on the power to your projector.
Press it three seconds or longer.
When turning on the power to your projector, first set the main
power switch to the main unit to ON, which puts your projector
on standby. (See page 21)
2. POWER OFF button
Operate this button to turn off (standby) the power to your
projector. Press it three seconds or longer.
3. Numeric buttons (1...

15
1. What’s in the Box? and the Names of the Projector Parts
11. SELECT  
 buttons
•Press the SELECT  
/  button when the menu is displayed, and a menu item can be selected.
•P ress the SELECT   button when the menu is displayed, and a submenu will be displayed.
•P ress the SELECT   button when the menu is displayed, and a menu one level above will be d\
isplayed.
• During character entry, press the SELECT  
 button while depressing the CTL button, then one character will be deleted.
12. ENTER...

1. What’s in the Box? and the Names of the Projector Parts
16
Using the remote control cable
Use the remote control cable when there are objects that interrupt or obstruct the space between the remote control reception
unit on the projector and the remote control, or when you are using the remote control beyond its effective range.
Note that the remote control cable is connected first to the remote control, then to the projector head.
SDI-ASDI-B DVI-ADVI-B
REMOTE IN RS-232C
PC CARD
USB
CINEMA
SYSTEM...

17
2-1. Steps for setting up and connecting
Use the following steps for setting up your projector:
•Step 1
Setup the screen and projector. (Contact your dealer to carry out the setup.)
•Step 2
Connect cables to the image input terminals. (See page 18)
Connect cables to the various  control terminals. (See page 19)
2.
Installation and
Connection 

2. Installation and Connection
18
2-2. Connecting the image input terminals
Your projector has four image input terminals, namely, the HDSDI A input terminal, the HDSDI B input terminal, the DVI-D A
input terminal, and the DVI-D B input terminal.
• HDSDI A/B input terminal (SDI A/SDI B) ------------ Inputs serial digital images from a Video Server or Video source.
• DVI-D A/B input terminal (DVI A/DVI B) ------------- Inputs digital RGB signals from a PC.
SDI-A
SDI-B DVI-ADVI-B
GP 
I/O
LAN-A LAN-B...

2. Installation and Connection
19
2-3. Connecting the various control terminal
For control, your projector comes with such ports as the PC control terminal and the Ethernet port (RJ-45).
•PC control terminal (PC CONTROL) ----- Use this terminal when controlling the projector in serial connection from a PC.
• Ethernet port (LAN 1/LAN 2) --------------- Use this port when controlling the projector in LAN connection from a PC.
SDI-A
SDI-B DVI-ADVI-B
GP 
I/O
LAN-A LAN-B
REMOTE IN RS-232C
PC CARD
USB
CINEMA...

20
3-1. Steps of projecting images
•Step 1
Turn on the power to the projector. (See page 21)
• Step 2
Select the title of input signal. (See page 23)
•Step 3
Adjust the position and size of the projected screen. (See page 24)
•Step 4
Turn off the power to the projector. (See page 27)
3.
Projection of Images
(Basic Operation)