NEC Nc1600c Dlp Cinema Projector Users Manual

NC1600C
User’s Manual
DLP Cinema® Projector 

2
Precautions:
Please read this manual carefully before using your
NC1600C and keep the manual handy for future reference.
Important Safeguards
These safety instructions are to ensure the long life of your
projector and to prevent fire and shock. Please read them
carefully and heed all warnings.
 WARNING
TO  PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO
DO NOT USE THIS UNITÅfS POLARIZED PLUG WITH
AN EXTENSION CORD RECEPTACLE OR OTHER
OUTLETS, UNLESS THE PRONGS CAN BE...

3
•Do not place the projector in the following conditions:
- near water, baths or damp rooms.
- on an unstable cart, stand, or table.
- in direct sunlight, near heaters or heat radiating appliances.
- in a dusty, smoky or steamy environment.
- on a sheet of paper or cloth, rugs or carpets.
• Do not place any liquids on top of your projector.
Refer servicing to qualified service personnel if liquid has
been spilled.
• Prevent foreign objects such as paper clips and bits of paper
from falling into your...

4
Lamp Caution: Please read before operation
•Due to the lamp being sealed in a pressurized environment,
there is a small risk of explosion, if not operated correctly.
There is minimal risk involved, if the unit is in proper working
order, but if damaged or operated beyond the recommended
hours, the risk of explosion increases. Please note that there
is a warning system built in, that displays following message
when you reach a preset operating time “Bulb Over Time”.
When you see this message please...

5
Table of Contents
Table of Contents ........................................................................\
.... 5
1.What’s in the Box? and the Names of the Projector Parts ............. 6
1-1. Features ........................................................................\
.......................................... .................................................. 6
1-2. What’s in the Box? ........................................................................\
...................................

6
1.
What’s in the Box? and
the Names of the
Projector Parts
1-1. Features
•DLP Cinema® dedicated projector that supports large screen needs
NEC has applied its mounting technology and leading imaging technology t\
o newly develop lamp and optical systems as well
as a cooling system to support large screen needs.
•Equipped with easy to use functions
(1) Lens memory function that can be operated with one touch, and lamp power memory fu\
nction
The DLP Cinema® projector is provided with a lens memory...

7
1. What’s in the Box? and the Names of the Projector Parts
•DMD Face Dust Protection Structure
A dust contral shield is arranged between each DMD chip of R, G and B, and the spectroscopic/condenser prism to prevent
dust and dirt in the air, and oily particles in smoke associated with event halls from coming into contact with the face of the  DMD
and causing operating problems.
•E fficient cooling of the heat from the DMD unit by the cooling structure
The DMD unit uses a highly efficient liquid cooling...

1. What’s in the Box? and the Names of the Projector Parts
8
1-2. What’s in the Box?
Check the content of the accessories.
NC1600C projector
Remote control (RD-371E)
UM-3 AA size battery (for the remote control) x 2
Remote cable (16 m) x 1
Attachment for lamp x 1
Exhaust outlet protective sheet x 1Exhaust outlet protective sheet fastening band x 4
Small iris x 1
Lamp door key x 2
Sheet of title labels (for 20 labels) x 2
Important Information x1
CD-ROM (
User’s Manual)
TIP
○○○○○○○○○○○○○○○○○○\
○○○...

9
1. What’s in the Box? and the Names of the Projector Parts
1-3. Names of the Projector Parts
1-3-1. Front of the Projector
1
2 3
4 5
6
7
1. Air outlet
Connects to an exhaust device to exhaust heat from the lamp. Please contact your dealer/distributor to install the exhau\
st
device.
2. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of
projected screen. (See page 12)
3. Connection terminals
Various image signal...

1. What’s in the Box? and the Names of the Projector Parts
10
1-3-2. Rear of the projector
4
5
2
1
3
1. AC power cable
This is the cable that supplies AC power to the projector head. The AC power cable is not an accessory. Consult with your
dealer/distributor about the AC power cable.
2. Level adjusters (in four positions on bottom)
In the ordinary installation, you can adjust the projector inclination at 4 positions.
3. Air inlet
Air is taken in here to provide cooling of the projector. Do not cover...