NEC MultiSync V462 V651 LCD Television User Manual

English-29
EnglishREMOTE CONTROL ID FUNCTION
REMOTE CONTROL ID
The remote control can be used to control up to 100 individual MultiSync\
 monitors using 
what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode 
works in conjunction with the Monitor ID, allowing control of up to 100 \
individual MultiSync 
monitors. For example: if there are many monitors being used in the same\
 area, a remote 
control in normal mode would send signals to every monitor at the same t\
ime (see 
Figure 1)....

English-30
3. Press the “DISPLAY” button on the remote control while aiming at the “PRIMARY” monitor. The Information OSD will be shown at 
top left side of the screen.
  Monitor ID:  Displays the ID number of the current monitor within the daisy chain.
   Target ID:  Displays the ID number of the monitor that to be controlled via daisy c\
hain from the current monitor.
  Press the “+” or “-” buttons to change the “Target ID” to show the ID number of the monitor to be controlled. To control the e ntire...

English-31
EnglishThis LCD monitor can be controlled by connecting a personal computer wit\
h a RS-232C terminal.
NOTE:  When you use this function, EXTERNAL CONTROL should be “RS-232C” (See page 24).
Functions that can be controlled by a personal computer are:
 Power ON or OFF
 Switching between input signals
Connection
LCD Monitor + PC
RS-232C Cable
PC 
(Out)
RS-232C CableRS-232C (OUT)
MultiSync
RS-232C (IN)
RS-232C (OUT)
RS-232C (IN)
IN
OUT MultiSync MultiSync
NOTE:
  If your PC is equipped only with...

English-32
Connecting to a Network
Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function.
NOTE:  When you use this function, EXTERNAL CONTROL should be “LAN” (See page 24).
To use a LAN connection, you are required to assign an IP address.
Example of LAN connection:
Server
Hub NOTE: Use a category 5 or higher LAN cable.
LAN cable (not  supplied)
Network Setting by Using an HTTP Browser
Overview
Connecting the monitor to a network allows...

English-33
English
Preparation Before Use
Connect the monitor to a commercially available LAN cable before engagin\
g in browser operations.
Operation with a browser that uses a proxy server may not be possible de\
pending on the type of proxy server and the setting 
method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be 
displayed depending on the effectiveness of the cache, and the contents set from the browser may not \
be re...

English-34
Alert Mail Setting
http:///lancon g.html
This option noti es your computer of an error message via e-mail when using wired LAN. An error message noti cation will be 
sent when an error occurs in the monitor.
Alert Mail Checking [ENABLE] will turn on the Alert Mail feature.Checking [DISABLE] will turn off the Alert Mail feature.
Host Name Type in the hostname of the network connected to the monitor. Up to 60 alphanumeric characters can be used.
Domain Name Type in the domain name of the...

English-35
English
Alert error message list
Error number* ErrorCode Alert mail Message Explanation Measure
70h ~ 7Fh The monitor’s power supply is not 
functioning normally. Standby power Abnormal Please contact your supplier.
80h ~ Fh  The cooling fan has stopped. Cooling fan Abnormal Please contact your supplier.
90h ~ 9Fh  The monitor’s back light unit is not 
functioning normally.  Backlight abnormal Please contact your supplier.
A0h ~ AFh The monitor is overheated. Temperature Abnormal Please...

English-36
Reduced Footprint: 
Provides the ideal solution for environments with superior image quality\
.
Color Control Systems:  Allow you to adjust the colors on your screen and customize the color ac\
curacy of your monitor to a 
variety of standards.
OmniColor:  Combines Six-axis color control and the sRGB standard. Six-axis color c\
ontrol permits color adjustments via six 
axes (R, G, B, C, M and Y) rather than through the three axes (R, G and B) previously availab\
le. The sRGB standard provides...

English-37
EnglishNo picture
 The signal cable should be completely connected to the display card/computer.
 The display card should be completely seated in its slot.
 Check the main Power Switch, it should be in the ON  position.
 Front Power Switch and computer power switch should be in  the ON position.
 Check to make sure that a supported mode has been  selected on the display card or system being used. (Please 
consult display card or system manual to change graphics 
mode.)
 Check the monitor and...

English-38
Specifi cations - V462
Product Specifi  cations
LCD Module
Pixel Pitch:
Resolution:  Color:
Brightness:
Contrast Ratio: Viewing Angle: 46”/1168 mm diagonal
0.530 mm
1920 x 1080
 Over 16 million colors (depending on video card used)
450 cd/m
2 (Max.), 340 cd/m2 (Factory setting Typ.) @25°C
3000:1
89° (typ) @ CR>10
Frequency Horizontal:
Vertical:15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input)
31.5 kHz - 91.1 kHz (Digital Input)
50.0 - 85.0 Hz
Pixel Clock 25.2 MHz - 162.0 MHz
Viewable Size...