NEC MultiSync V462 V651 LCD Television User Manual

English-19
English
Information OSD
The Information OSD provides information such as: Monitor ID, Input Sour\
ce, Picture Size, etc. 
Press the DISPLAY button on the remote to bring up the Information OSD.
 ID number assigned to current monitor*1
 ID number assigned monitor to be controlled via RS-232C*2
 Input Name
 Audio input mode
 Picture aspect
 Input Signal Information
 Sub picture information
*1: “IR CONTROL” should be set “Primary” or “Secondary”\
.
*2: “IR CONTROL” should be set...

English-20
OSD (On-Screen-Display) Controls
NOTE:  Some functions may not be available depending on the model or optional e\
quipment.
PICTURE MODE
Goto Adjustment
S elect Return Close
70
50
50
50
50
50
THANK YOU FOR SAVING
                         THE ENVIRONMENT.
CARBON FOOTPRINT            86.0 %
Input source
Main Menu Icons Main Menu Item
Sub Menu
Key Guide Adjustment Settings
Remote Control
Press UP or DOWN 
button to select 
sub-menu.
Press SET. Press UP or DOWN, 
PLUS or MINUS to select 
the...

English-21
English
SettingDefault
PICTURE
BACKLIGHT Adjusts the overall image and background brightness. Press + or - to adj\
ust. 70
CONTRAST Adjusts the image brightness in relationship to the input signal. Press \
+ or - to adjust.
Note: When sRGB is selected in picture mode, this function cannot be cha\
nged. 50
SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50*
BRIGHTNESS Adjusts the image brightness in relationship to the background. Press + \
or - to adjust. Note: When sRGB...

English-22
H RESOLUTIONVGA, RGB/HV inputs onlyAdjusts the horizontal size of the image. -
V RESOLUTION
VGA, RGB/HV inputs onlyAdjusts the vertical size of the image. -
INPUT RESOLUTION
VGA, RGB/HV inputs onlyIf there is a problem with signal detection, this function forces the mo\
nitor to display the signal at 
the desired resolution. After selection, execute “AUTO SETUP” if required.
If no problem is detected, the only available option will be “AUTO”. AUTO
ASPECT Select the aspect ratio of the screen...

English-23
English
TIME Con gures the time for the real-time clock. -
DAYLIGHT SAVING Con gures daylight savings on or off. OFF
RESET Resets the following settings within the SCHEDULE menu back to factory s\
etting: OFF TIMER,  SCHEDULE SETTINGS. -
PIP
KEEP PIP MODEAllows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off.
When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.OFF
PIP MODE Selects Picture-in-Picture mode. OFF OFF Normal mode.
PIP Picture...

English-24
INFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will be displayed when the input signal or source changes. The information OSD will also give a warning when 
there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSD to appear is\
 available. ON, 3 Sec.
MONITOR INFORMATIONIndicates the model and serial number of your monitor.
CARBON SAVINGS: Display the estimated carbon saving information in kg....

English-25
English
LAN SETTINGWhen you use this function, EXTERNAL CONTROL should be “LAN”.
NOTE: When changing the LAN SETTING, turn the monitor off and then back on.
After turning on the monitor, you need to wait several seconds until the LAN SETTING is applied.
DHCP Enabling this option automatically assigns an IP address to the monitor from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from 
your network administrator.
NOTE: Consult your...

English-26
ADVANCED OPTION
INPUT DETECT Selects the method of input detection the monitor uses when more than tw\
o input devices are connected. NONE
NONE The Monitor will not search the other video input ports.
FIRST DETECT When the current video input signal is not present, then the monitor sea\
rches for a video signal  from the other video input port. If the video signal is present in the o\
ther port, then the monitor 
switches the video source input port to the new found video source autom\...

English-27
English
OVER SCANHDMI, DVD/HD, SCART, VIDEO1, VIDEO2, 
S-VIDEO inputs onlySome video formats may require different scanning modes in order to best display the image. ON
ON Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
OFF Image size stays within the display area. The whole image is displayed on the screen. NOTE: When you use a computer with HDMI out, please set “OFF”.
OPTION SETTING You can set...

English-28
NOTE 1: CREATING A SCHEDULE
The schedule function allows the display to be set to power on and off at different times. Up to seven different schedules can 
be programmed.
  To program the schedule:
1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and do\
wn buttons. Press the SET or the + button to enter t he 
Settings menu. Highlight the desired schedule number and press set. The box next to the number will turn yellow. The schedule c an now be 
programmed.
2. Use the...