NEC MultiSync V462 V651 LCD Television User Manual

English-9
English
Terminal Panel
RGB/HV
RGB/HVDVD/HD
DVD/HD VIDEO2
VIDEO2
RGB/HV
DVD/HD VIDEO2
AC IN
MAIN POWER
LANREMOTE
OUT
REMOTE IN RS-232C
IN
RS-232C
OUT DVI-D
OUT VGA INVGA IN
DVI-D IN HDMI
DISPLA
YPORT
IN AUDIO IN
AUDIO IN
AUDIO IN SPEAKER
SPEAKER
SPEAKERINTERNAL/EXTERNAL
INTERNAL/EXTERNAL
SPEAKER SWITCH
SPEAKER SWITCH
INTERNAL/EXTERNAL
SPEAKER SWITCH
VGA IN AUDIO
AUDIO
OUT
OUT
VIDEO 1
VIDEO 1 IN
IN S-VIDEO
S-VIDEO
IN
IN
VIDEO
VIDEOOUT
OUT AUDIO
OUT
VIDEO 1 IN S-VIDEO
IN
VIDEOOUT
L/R 
(IN2)
R...

English-10
 Internal/External Switch speaker
Switch to turn internal speaker/external speaker.
 : Internal speaker    : External speaker.
NOTE:  Please power off the monitor when you use Internal/
External speaker switch.
 Kensington Lock
For security and theft prevention.
 Option board slot
Slot for board accessories. Please contact your supplier for 
detailed information.
NOTE:  Please contact your supplier for available option 
board.
NOTE:  When you use an option board, which is compliant 
with...

English-11
English
Wireless Remote Control
 POWER button
Switches the power on/standby.
 INPUT button
Selects input signal.
 DVI: DVI
 DISPLAYPORT: DPORT
 VGA: VGA
 RGB/HV: RGB/HV
 HDMI: HDMI
  DVD/HD: DVD/HD, SCART
  VIDEO: VIDEO1, VIDEO2
 S-VIDEO: S-VIDEO
  OPTION: Depends on your connection
 PICTURE MODE button
Selects picture mode, [HIGHBRIGHT], [STANDARD], 
[sRGB], [CINEMA]. See page 19.
  HIGHBRIGHT: for moving images such as DVD.
  STANDARD: for images.
  sRGB: for text based images.
  CINEMA:...

English-12
Operating Range for the Remote 
Control
Point the top of the remote control toward the LCD monitor’s 
remote sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.) 
from remote control sensor or at a horizontal and vertical 
angle of within 30° within a distance of about 3.5 m (10 ft.).
 REMOTE ID button
Activates REMOTE ID function.
 MTS button*2
 AUDIO INPUT button
Selects audio input source [IN1], [IN2], [IN3], [HDMI], 
[DPORT], [OPTION]*
1....

English-13
English1. Determine the installation location
CAUTION: Installing your LCD monitor must be done by a 
quali ed technician. Contact your dealer for more 
information.
CAUTION: 
MOVING OR INSTALLING THE LCD MONITOR 
MUST BE DONE BY TWO OR MORE PEOPLE 
FOR V462, BY FOUR OR MORE PEOPLE FOR 
V651. Failure to follow this caution may result in 
injury if the LCD monitor falls.
CAUTION:  Do not mount or operate the monitor upside 
down, face up, or face down. 
CAUTION:  This LCD has a temperature...

English-14
5. Switch on the power of all the attached external equipment
When connected with a computer, switch on the power of the 
computer  rst.
6. Operate the attached external equipment
Display the signal from the desired input source.
7. Adjust the sound
Make volume adjustments when required.
8. Adjust the screen (See pages 21 and 22)
Make adjustments of the screen display position when 
necessary.
9. Adjust the image (See page 21)
Make adjustments such as backlight or contrast when 
required.
10....

English-15
English
Connections
NOTE: Do not connect/disconnect cables when turning on the monitor or other ex\
ternal equipment as this may result in a 
loss of the monitor image.
NOTE:  Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
Before making connections:
*  First turn off the power of all the attached equipment and make connections.
*  Refer to the user manual included with each separate piece of equipment.\
Wiring Diagram
DVD...

English-16
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to display \
your computer’s screen image.
Some video cards with a pixel clock over 162MHz may not display an image\
 correctly.
Your LCD monitor displays proper image by adjusting the factory preset ti\
ming signal automatically.

ResolutionScanning frequency Remarks
Horizontal Vertical
640 x 480 31.5 kHz 60 Hz
800 x 600 37.9 kHz 60 Hz
1024 x 768 48.4 kHz 60 Hz
1280 x 768 48 kHz 60 Hz
1360 x 768 48...

English-17
English
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on and wil\
l turn red or amber while powered off. 
NOTE:  The Main Power Switch must be in the ON position in order to power up th\
e monitor using the remote control or the 
Power Button on the front of the LCD.
Main Power Switch
ON
OFF
Power Button
Using the remote control
Power Button 

English-18
Picture Aspect
DVI, VGA, RGB/HV, DPORT
FULL  1:1  ZOOM  NORMAL
   
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEO
FULL  WIDE  DYNAMIC  1:1  ZOOM  NORMAL
   
Aspect ratio
of image Unchanged view*3Recommended selection
for picture aspect*3
4:3
NORMAL 
DYNAMIC
Squeeze
FULL
Letterbox
WIDE
*3 Grey areas indicate unused portions of the screen.
NORMAL:  Displays the aspect ratio the same as it is sent 
from the source.
FULL:  Fills entire screen.
WIDE:  Expands a 16:9 letter box signal to  ll entire...