NEC Multisync Pa271w Users Manual

English-29
English
Troubleshooting
No picture The signal cable should be completely connected to the display card/comp\
uter.
 The display card should be completely seated in its slot.
 The monitor does not support DisplayPort converter signal.
 Front Power Switch and computer power switch should be in the ON positio\
n.
 Check to make sure that a supported mode has been selected on the displa\
y card or system being used. (Please consult display card or system manual to change graphics mode.)\
 Check...

English-30
No Video
 If no video is present on the screen, turn the Power button off and on a\
gain.
 Make certain the computer is not in a power-saving mode (touch the keyb\
oard or mouse).
 Some video cards do not output video signal when monitor is turned OFF/O\
N or disconnect/connect from the AC power cord under low resolution with DisplayPort.
 If no video is present on the screen, check the status of the EDID EXTEN\
SION in the User menu (see page 12), the  setting may need to be changed to allow...

English-31
English
Using the Auto Brightness function
The brightness of the LCD screen can be set to increase or decrease depe\
nding on the amount of ambient light within the 
room. If the room is bright, the monitor becomes correspondingly bright.\
 If the room is dim, then the monitor will dim accordingly. 
The purpose of this function is to make the viewing experience more comf\
ortable to the eye in a variety of lighting conditions.
The Auto Brightness function is set to OFF by default.
SETUP
Use...

English-32
TCO’03 (for MultiSync PA271W)
Congratulations!
The display you have just purchased carries the TCO’03 Displays 
label. This means that your display is designed, manufactured and 
tested according to some of the strictest quality and environmental 
requirements in the world. This makes for a high performance 
product, designed with the user in focus that also minimizes the 
impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics  Good visual...

English-33
English
TCO Displays 5.0 (for MultiSync PA241W)
Congratulations!
This display is designed for both you and the planet!The display you have just purchased carries the TCO 
CertiÞ ed label. This ensures that your display is designed, 
manufactured and tested according to some of the strictest 
quality and environmental requirements in the world. 
This makes for a high performance product, designed with 
the user in focus that also minimizes the impact on the 
climate and our natural...

English-34
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection \
and sees recycling as one of the company’s 
top priorities in trying to minimize the burden placed on the environmen\
t. We are engaged in developing environmentally-
friendly products, and always strive to help de ne and comply with the latest independent standards from agencies such a\
s 
ISO (International Organisation for Standardization) and TCO (Swedish\
 Trades Union).
Disposing of your old NEC product
The aim of...