NEC Multisync Pa271w Users Manual

MultiSync PA241W
MultiSync PA271W
User’s Manual
 

Index
Warning, Caution ........................................................................\
..................................................Engli sh-1
Declaration ............................................................\
....................................................... ................English-1
Canadian Department of Communications Compliance Statement .............................................English-2
Declaration of Conformity...

English-1
English
WARNING
CAUTION
CAUTION:   TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED \
FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCO\
NNECT 
THE POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO US\
ER 
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL\
.
  This symbol warns user that uninsulated voltage within the unit may have\
 suf cient magnitude to cause   electric shock. Therefore, it is dangerous to...

English-2
Canadian Department of Communications 
Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian In\
terference-Causing Equipment Regulations.
C-UL:  Bears the C-UL Mark and is in compliance with Canadian Safety Regulatio\
ns according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1.   Use the attached speci ed cables with the MultiSync PA241W/MultiSync PA271W color monitor so as\
 not to interfere    
  with radio and television reception.
  (1)  The...

English-3
English
Product Features
 DisplayPort, which supports 10-bit color depth.
 5-setting, easy-to-switch picture mode (see page 11).
 Accurate color reproduction for high-end graphic design (see page 11).\
 Quick warmup time.
 Picture-in-picture/picture-by-picture dual-screen mode includes real-tim\
e preview (see page 21).
 USB hub with two upstream ports (see page 12).
 MultiPro ler extends color management feature, including automatic ICC pro le updates (ICC pro le Emulation, Printer...

English-4
Quick Start
To connect the LCD monitor to your system, follow these instructions:
1.  Turn off the power to your computer.
2. For a PC or MAC with DVI digital output:  Connect the DVI signal cable to the connector of the display card in yo\
ur system 
( Figure A.1 ). Tighten all screws.
  For a PC with Analog output (only for PA241W):  Connect a 15-pin mini D-SUB to DVI-A signal cable (not included) to t\
he 
connector of the display card in your system ( Figure A.2).
  For a MAC (only for...

English-5
English
4.  Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector 
to the USB upstream port on the right back side of the monitor and the A\
 type connector to the downstream port on the 
computer ( Figure C.1a ). If using the cord from a USB device, plug into one of the downstream\
 ports of the monitor.  
NOTE:  Incorrect cable connections may result in irregular operation, damage di\
splay quality/components of LCD module...

English-6
7.  Slide down the cable cover (
Figure D.1). 
8.  Connect one end of the power cord to the AC inlet on the back of the mon\
itor and the other end to the power outlet.
NOTE:   Please refer to Caution section of this manual for proper selection of A\
C power cord.
Figure D.1
9.  Turn on the monitor with the front power button ( Figure E.1) and the computer.
10.  Only for PA241W:  No-touch auto adjust automatically adjusts the monitor to optimal setti\
ngs upon initial setup for most 
timings....

English-7
English
Screen Rotation
Before rotating, the screen must be raised to the highest level and tilt\
 to avoid knocking the screen on the desk or pinching your 
 ngers. Disconnect all cables.
To raise the screen, place hands on each side of the monitor and lift up\
 to the highest position ( Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and tur\
n clockwise from Landscape to Portrait or counter-
clockwise from Portrait to Landscape ( Figure R.1).
To rotate OSD...

English-8
Figure S.1
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1.  Disconnect all cables.
2.  Place hands on each side of the monitor and lift up to the highest posit\
ion.
3.  Place monitor face down on a non-abrasive surface (Figure S.1).
4.  Place one hand around the base and one hand on the Quick Release Lever. \
 Push and hold the Quick Release Lever in the direction indicated by the \
arrows 
(Figure S.1 ).
5.  Lift up the stand to unhook it from the...