Home > NEC > Monitor > NEC Multisync Pa271w Users Manual

NEC Multisync Pa271w Users Manual

Here you can view all the pages of manual NEC Multisync Pa271w Users Manual. The NEC manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 21

English-19
English
Tag4*1
(Analog 
input only)
AUTO ADJUST*2 Automatically adjusts the Image Position and H.Size settings and Fine se\
ttings.
Press “SELECT” to activate Auto Adjustment. Please use test patter\
n, which is included 
in the enclosed CD-ROM.
SIGNAL ADJUST   Determines when the auto adjustment is activated automatically. 
 The choices are “SIMPLE” and “FULL”. Press “Left” or “\
Right” to select.
H-size, Fine, H/V Position Contrast
SIMPLE O X FULL O O
O: Automatic Adjustment    X: No...

Page 22

English-20
V.RESOLUTION  Adjusts the vertical size by increasing or decreasing the setting. Press “Right” button to expand the height of the image on the scre\
en.
 Press “Left” button to narrow the height of the image on the scree\
n.
EXPANSION Sets the zoom method.  FULL: The image is expanded to full screen, regardless of the resolution\
.
 ASPECT: The image is expanded without changing the aspect ratio.
 OFF: The image is not expanded.
 CUSTOM: When CUSTOM is selected as the Expansion mode, it...

Page 23

English-21
English
OSD LOCK OUT*2 This control completely locks out access to all OSD control functions. W\
hen attempting 
to activate OSD controls while in the Lock Out mode, a screen will appea\
r indicating the 
OSD controls are locked out.
 There are three types of OSD LOCK OUT:
OSD LOCK OUT with no control: To activate the OSD Lock Out function, pre\
ss SELECT, 
then “Right” button and hold down simultaneously. To deactivate th\
e OSD Lock Out, 
press SELECT, then “Right” button and hold down...

Page 24

English-22
DDC/CI DDC/CI ENABLE/DISABLE: Turns on or off the two way communication and con\
trol with connected PC by video cable.
NOTE: Set DDC/CI to ENABLE when using hardware calibration software like\
 
MultiPro ler over DisplayPort, DVI or VGA.
SCREEN SAVER Use the SCREEN SAVER to reduce the risk of image persistence. MOTION (Default OFF): Screen image moves periodically in 4 directions \
in order to 
reduce the risk of image retention.
Timing for MOTION can be set so the screen image moves in...

Page 25

English-23
English
TagB  CARBON SAVING Displays the estimated carbon savings information in kg.
COST Displays the electricity cost savings in balance.
CARBON CONVERT 
SETTING Adjusts the carbon footprint factor in the carbon saving calculation. Th\
is initial setting is 
based on the OECD (2008 Edition).
CURRENCY 
SETTING*
2Displays electricity pricing (available in 6 currency units).
CURRENCY 
CONVERT SETTING Adjusts electricity prices-electric energy equivalent in the electrical \
rate saving...

Page 26

English-24
Recommended use
Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP AND  USING THE LCD COLOR MONITOR:
•  DO NOT OPEN THE MONITOR.  There are no user serviceable parts inside and opening or removing cover\
s may expose 
you to dangerous shock hazards or other risks. Refer all servicing to qu\
ali ed service personnel.
 Do not spill any liquids into the cabinet or use your monitor near water\
.
 Do not insert objects of any kind into the cabinet...

Page 27

English-25
English
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:
 For optimum performance, allow 20 minutes for the display to warm up.
 Adjust the monitor height so that the top of the screen is at or slightl\
y below eye level.  Your eyes should look slightly downward when viewing the middle of the s\
creen.
 Position your monitor no closer than 40 cm (15.75 inches) and no furth\
er away than  70 cm (27.56...

Page 28

English-26
Specifi cations - PA241W
Monitor Specifi  cations MultiSync PA241W Notes
LCD Module  Diagonal:
  Viewable Image Size:
  Native Resolution (Pixel Count):  61.1 cm/24.1 inches 
61.1 cm/24.1 inches 
1920 x 1200 Active matrix; thin  lm transistor (TFT) liquid crystal 
display (LCD); 0.270 mm dot pitch; 360 cd/m2 white 
luminence; 1000:1 contrast ratio, typical.
Input Signal DisplayPort:  DisplayPort Connector: Digital RGB  DisplayPort Complies with Standard V1.1a,  applicable to HDCP
DVI:  DVI-D...

Page 29

English-27
English
Specifi cations - PA271W
Monitor Specifi  cations MultiSync PA271W Notes
LCD Module  Diagonal:
  Viewable Image Size:
  Native Resolution (Pixel Count):  68.5 cm/27.0 inches 
68.5 cm/27.0 inches 
2560 x 1440 Active matrix; thin  lm transistor (TFT) liquid crystal 
display (LCD); 0.225 mm dot pitch; 300 cd/m2 white 
luminence; 1000:1 contrast ratio, typical.
Input Signal DisplayPort:  DisplayPort Connector: Digital RGB  DisplayPort Complies with Standard V1.1a,  applicable to HDCP
DVI:...

Page 30

English-28
Features
DisplayPort: DisplayPort is designed to be the future-ready, scalable solution for hi\
gh performance digital display connectivity. It 
enables the highest resolutions, the fastest refresh rates and deepest c\
olor depths over standard cables.
DFP (Digital Flat Panel):  An all-digital interface for  at panel monitors which is signal compatible with DVI. As a DVI-based di\
gital only 
connection, only a simple adapter is necessary for compatibility between\
 DFP and other DVI-based...
Start reading NEC Multisync Pa271w Users Manual

Related Manuals for NEC Multisync Pa271w Users Manual

All NEC manuals