NEC MT1065 Projector User Manual

LCD Projector
MT1065/MT1060/MT860
User’s Manual 

LIMITED WARRANTYExcept as specified below, the warranty that may be provided by the
dealer covers all defects in material or workmanship in this product.
The following are not covered by the warranty:
1. Any product on which the serial number has been defaced, modified
or removed.
2. Damage, deterioration or malfunction resulting from;
a. Accident, misuse, abuse, neglect, fire, water, dust, smoke, lightning or
other acts of nature, unauthorized product modification, or failure to fol-
low instructions...

NEC SOLUTIONS’ PROJECTOR PRODUCTSNEC Solutions (America), Inc. (hereafter NEC Solutions) warrants
this product to be free from defects in material and workmanship
under the following terms.
HOW LONG IS THE WARRANTYNEC Solutions’ MT1065, MT1060, MT860 and MT1060R pro-
jectors are covered by a two (2) year limited parts and labor
warranty from the date of the first customer purchase. The lamp
when used under normal operating conditions is warranted for
1000 hours or six months, whichever comes first.
WHO...

DECLARATION OF CONFORMITY
U.S. Responsible Party:
Address:
Tel. No.:NEC Solutions (America), Inc.
1250 N. Arlington Heights Road
Itasca, Illinois 60143
(630) 467-5000
Type of Product:
Equipment Classification:
Models:LCD Projector
Class B Peripheral
MT1065, MT1060, MT860 and MT1060R
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules. 
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions....

Portable Projector
MT1065/MT1060/MT860
User’s Manual
English
Deutsch
Français
Italiano
Español
Svenska 

E-2
Safety Cautions
Precautions
Please read this manual carefully before using your NEC MT1065/
MT1060/MT860 Projector and keep the manual handy for future refer-
ence. Your serial number is located on the right side of your projector.
Record it here:
CAUTION
To turn off main power, be sure to remove the plug from power
outlet.
The power outlet socket should be installed as near to the
equipment as possible, and should be easily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
NO...

E-3
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and that vents are unob-
structed to prevent the build-up of heat inside your projector. Allow
at least 3 inches (10 cm) of space between your projector and a
wall.
2. Prevent foreign objects such as paper clips and bits of paper from
falling into your projector.
Do not attempt to retrieve any objects that might fall into your projec-
tor. Do not insert any metal objects such as a wire or screwdriver
into your projector. If...

E-4
TABLE OF CONTENTS
Important Information ..................................................... E-2Safety Cautions ............................................................................................................... E-2
Whats in the Box? .......................................................................................................... E-3
INTRODUCTION .............................................................. E-5Introduction to the Projector...

E-5
INTRODUCTION
Introduction to the ProjectorThis section introduces you to your new MT1065/MT1060/MT860 Pro-
jector and describes the features and controls.
Congratulations on Your Purchase of The MT1065/
MT1060/MT860 Projector
The MT1065/MT1060/MT860 is one of the very best projectors avail-
able today. The MT1065/MT1060/MT860 enables you to project precise
images up to 500 inches across (measured diagonally) from your PC or
Macintosh computer (desktop or notebook), VCR, DVD player, docu-
ment camera,...

E-6
AC INR
G
B
2
 I
NR
G
B
  O
U
T A
U
D
IO
A
U
D
IOD
V
I
 I
NU
S
B(M
O
U
S
E
/H
U
B)R
EM
O
T
EA
U
D
IO
A
U
D
IOG
/Y
B
/C
bHV
R
G
B
1
 I
N
S
-
V
ID
E
O
 
INV
I
D
E
O
 
IN
A
U
D
IO
A
U
D
IO
A
U
D
IOL/MONORL/MONORA
U
D
IO
 O
U
T L
/M
O
N
ORP
C
 C
O
N
T
R
O
L
1
2
Part Names of the Projector
Ventilation (outlet)
Heated air is exhausted from here
* This security slot supports the MicroSaver® Security System. MicroSaver® is a registered trademark of Kensington Microware Inc. The logo is
trademarked and owned...