NEC Mt1065 Lcd Projector Users Manual

							E-27
Turning Off the Image and Sound
Press the Picture Mute button to turn off the image and sound for a
short period of time. Press again to restore the image and sound.
PIC-MUTE
Freezing a Picture
Press the Freeze button to freeze a picture. Press again to resume
motion.
FREEZE
Using the Pointer
You can use one of nine pointers to draw your audiences attention to
the portion of a projected image you want.
Press the Pointer button to dis-
play the pointer.
POINTER
Press the Pointer button to display the pointer.
Use the Select button to move
the pointer.
SELECT
Use the Select button to move the pointer.
Enlarging and Moving a Picture
You can enlarge the area you want up to 400 percent.
To  do so:
1. Press the Pointer button to display the pointer.
POINTER
SELECT
MAGNIFY
MAGNIFY
2. Move the pointer to the area you want to enlarge.
3. Enlarge the selected area.
When the Magnify (+) button is pressed, the image is magnified. To
move the magnified image, use the SELECT button.
Getting the On-line Help
You get the contents about Help.
Display Help
Exit Help
HELP
SELECT
4. Return the image to the original size. 
						

							E-28
Using a USB Mouse
Using a USB mouse gives you a smooth operation. A commercially avail-
able USB mouse is required.
NOTE:
•The MT1065 comes with a USB mouse.
•There may be some brands of USB mouse that the projector does not sup-
port.
Operate the Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a mouse
cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse cur-
sor disappears.
Menu Display
Clicking with a mouse button displays the menu.
Clicking  displays the pull-down menu. To close the menu, click
anywhere in the background.
Adjusting and Setting Display
You can select a menu item and click with a mouse button to make
adjustments and setting.
Examples
Click (or press and hold) the mouse button  or  to adjust the bright-
ness. Or click and drag the mouse button on the slide bar horizontally
to adjust it.
To save the adjustments, click 
. The display is closed. If you click
anywhere in the background while displaying adjustment and setting
menu or dialog box, you will get the main menu at the clicking point.
Using the middle button on the mouse
The projector supports the middle button on your mouse.  With the middle
button you can use a scroll bar when it is available or click the middle
button to display or hide the Chalkboard toolbar.
USB(
MOUSE/HUB)
Using the USB HUB Function
When using the projector with a PC via the supplied USB cable, both
the USB port(type A) on the projector can be connected to a USB-sup-
ported scanner or other USB-supported device. (USB Hub Function)
Example: When connecting a PC and a scanner to each USB port re-
spectively
USB(
PC)USB(
MOUSE/HUB)
An example of how a scanned image is projected
1. Install the Dynamic Image Utility on your PC.
NOTE: The Dynamic Image Utility is contained on the supplied CD-ROM. See
the supplied NEC Software Utility Installation Guide for the installation proce-
dure.
2. Use your scanner to scan an image.
NOTE: A scanner driver must be installed on your PC before use.
3. Load the scanned image on your PC using the Dynamic Image Util-
ity.
4. Transmit the scanned image from your PC to the projector via the
USB cable and project the image on the screen.
NOTE:
•The USB HUB function is effective only when “Auto” is selected in Operation
Mode Select.
•The PCs using the USB Host Controller may not be available.
•When connecting a USB hub to the USB port (type B) on the projector, be
sure to use a USB hub capable of supplying 500mA per port of downstream
current. 
						

							E-29
Changing Background Logo
You can change the default background logo using the PC Card Files
feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMPare not available.
1. From the menu, select [Tools] 
→ [PC Card Files] to display a list of all
the files stored in the PC card so that you can select a file you want to
use as a background logo.
2. The Logo button allows you to select a background logo from graphic
files on a PC card and change to it as the background logo.
3. Use the SELECT 

 or  button to select a JPEG or BMP file for your
background logo.
4. Use the SELECT 
 and then  button to select Logo.
5. Press the ENTER on the remote control or the cabinet. You will get
the confirmation dialog box.
6. Select OK and press the ENTER button. This completes changing
a logo for the background.
*Once you have changed the background from the NEC logo to an-
other, you cannot return the logo to background even by using Fac-
tory Default. To do so, repeat the above steps. The NEC logo file is
included on the supplied CD-ROM NEC Projector User Supportware
(Logo/nec_bb_x.jpg).
Making Freehand Drawings on a Projected
Image (ChalkBoard)
The ChalkBoard feature allows you to write and draw messages on a
projected image.
NOTE: The ChalkBoard feature is available only when a USB mouse is used.
From the menu, select [Tools] → [ChalkBoard] to display the ChalkBoard
tool bar that contains the following icons.
Drag
PenEraser Drive
Exit
Clear Color
Drag ............ Drags to move the tool bar by clicking on the blue part.
(for USB mouse operation only)
Pen.............. Left-click and drag to draw. Left-click [
] or right-click the
pen icon to display the pen palette containing four lines of
different thickness from which you can select a line you
prefer by left-clicking.
Color ........... Selects a color. Left-click to display the color palette from
which you can select a color you prefer by left-clicking.
Capture ....... Left click to capture and save freehand drawings in the
PC card.
Eraser ......... Left-click and drag to erase part of a drawing. Left-click
[
] or right-click the eraser icon to display the eraser pal-
ette containing four eraser of different thickness from which
you can select an eraser you prefer by left-clicking.
Clear ...........Left-click to clear the drawing completely from the
ChalkBoard screen.
Drive ............ Switches between PC Card slot 1 and 2.
Hide ............. Hides the tool bar by left-clicking. Right-clicking anywhere
on the screen displays the ChalkBoard tool bar again.
Exit .............. Clears the complete drawing and exits the ChalkBoard.
NOTE:
•The menu is not available while you display the ChalkBoard screen.
•Switching slides clears a drawing completely.
CaptureHide
USB Memory Device or USB Memory Card
Reader Support
The projector is compatible with either a USB memory device or USB
memory card reader which supports the viewer and security features.
•To use a USB memory device or USB memory card reader, connect
the device to the USB port (type A).
•Select one of the Drive icons in the Viewer toolbar, Capture toolbar
and PC Card File setting screen. Up to four drives can be accepted.
•To use a USB memory device as a Protect key for Security function,
select one from the Drive icons in the Security setting screen.
NOTE:
•Some USB memory devices (brands) or USB memory card readers may not
work.
•You cannot use a USB memory device and a USB memory card reader when
connecting a USB mouse to the projector.
Using a USB HUB that allows multiple USB memory devices or card readers
is not supported either.
•Do not do the following while the USB memory device or USB memory card
reader’s access indicator is lit or flashing (while data is being accessed.) Do-
ing so can damage your USB memory device or USB memory card in the
reader. Back up your data in case it will need to be restored.
*Pulling out the USB memory device or USB memory card reader from the
USB port of the projector.
*Pulling out the memory card from the USB memory card reader
*Turning off the main power switch or unplugging the power cable.
•The drive for ”USB 1-4” is displayed only when the USB memory device or
USB memory card reader is connected to the projector. The drive for “USB 1-
4” may be displayed differently from the one in the USB memory card reader.
•Some USB memory devices (brands) or USB memory cards cannot be used
as Protect key for the projector’s Security function. 
						

							E-30
AC INRGB2 INRGB  OUT AUDIO
AUDIODVI INUSB(MOUSE/HUB)R
E
M
O
T
E
AUDIO
AUDIOG/Y
B/CbHV
RGB1 IN
S
-V
ID
E
O
 INV
ID
E
O
 IN
AUDIO
AUDIO
AUDIO
L/MONORL/MONORAUDIO OUT L/MONORPC CONTROL
1
2
PC card (not supplied)
USING THE VIEWER
NOTE:
•To use the Viewer, first you need to create presentation materials on your PC
using the Dynamic Image Utility 2.0 contained on the supplied NEC Projector
User Supportware CD-ROM. For installation, see the printed NEC Software
Utility Installation Guide. For creating presentation materials, see the Slide
show function on the on-line manual of the Dynamic Image Utility 2.0.
•Selecting Viewer sets the audio input for DVI input.
Making the Most out of the Viewer Function
Features
You can view presentation data, capture, and play images on the pro-
jector. A PC card is used to view presentation data prepared on the
computer and to capture and play images projected with the projector.
The Viewer feature allows you to view slides stored on a PC memory
card (referred to as PC card in this manual) on the projector. Even if no
computer is available, presentations can be conducted simply with the
projector. This feature is convenient for holding presentations at meet-
ings and in offices, as well as for playing images taken on digital cam-
eras.
Easy to use
•Presentations can be started immediately simply by inserting a
PC card (not supplied)
•Easy slide switching
•Remote control operation
•Jumping to list of slides or any specific slide
High quality images
•High resolution up to 1024 x 768 dots
•24-bit full color playback
•Viewing of digital camera images
Simple utility software (for computer)
•Dynamic Image Utility 2.0 operable on Windows 98/Me/XP/2000
•Slides can be created by capturing the currently displayed im-
age
•Control screen for displaying lists of slides and editing
*Microsoft, Windows and PowerPoint are registered trademarks
of Microsoft Corporation.
Removing the PC Card
Press the eject button. The PC card pops out a little. Grasp the edges
of the PC card and pull it out.
NOTE: Do not eject the PC card while its data is being accessed.
Eject button
Direction for Inserting the PC Card
The PC card has a top and bottom and must be inserted into the PC
card slot in a specific direction. It cannot be inserted backwards or up-
side-down. Attempting to force it into the slot in the wrong direction may
break the internal pin and damage the card slot. Refer to the PC cards
operating instructions for the proper direction of insertion.
PC Card Type
The PC Card slot accepts PCMCIA Type II only.
NOTE: The projector does not support FAT32 or NTFS formatted flash memory
card or USB memory device.
Be sure to use a flash memory card or USB memory device formatted with the
FAT16 or FAT file system.
To format your flash memory card or USB memory device in your computer,
refer to the document or help file that comes with your Windows.
Inserting and Removing a PC Card
NOTE:
•Do not try to force the PC card into the slot.
•A dummy card is inserted into each slot at the time of shipment. First remove
the dummy cards before use.
A
C
 INR
G
B
  O
U
T U
S
B
(M
O
U
S
E
/
H
U
B)REMOTE
A
U
D
I
O
HV
VIDEO IN
A
U
D
IO
A
U
D
I
OL/MONORA
U
D
I
O
 O
U
T L
/
M
O
N
ORP
C
 C
O
N
T
R
O
L
1
2
Inserting the PC Card•Hold the PC card horizontally and insert it slowly into PC card
slot 1 or 2 with its top facing up.
•The eject button pops out once the PC card is fully inserted.
Check that the PC card is fully inserted. 
						

							E-31
Operating the Viewer Function from the
Projector (playback)
This section describes the operation for showing slides of presentation
documents created using the Viewer function with the projector. It is
also possible to make slides directly from the images projected with the
projector.
Projecting slides (Viewer)
1. Insert a PC card into the PC card slot.
Insert the PC card so that the end with the insertion direction arrow
on the top goes in first.
*Press the eject button to eject the card.
2. Select the Viewer from the Source Select menu.
3. Project slides.
Checking Show Folder List, means that selecting Viewer input dis-
plays a list of the folders in the PC card and if Auto Play is checked the
projector automatically starts to play slides at the first slide of the folder
you have selected.
A tool bar will appear when you press the MENU button on the remote
control or the projector cabinet or clicking with the right button of a mouse.
The tool bar includes the following buttons:
Drag ............ Drags to move the tool bar. This is available for USB mouse
operation only.
Prev ............. Returns to the previous slide or folder. Or this lets you
play slides back in reverse.
Next ............. Advances to the next slide or folder. Or this lets you play
slides back.
Play ............. Plays back automatically or manually depending on the
setting on Viewer Options of the menu. This allows you to
move on to the next slide when Manual Play is selected.
Stop ............. This allows you to stop Auto Play while you are playing
back and to resume playing from the selected slide or folder
when Auto Play is selected.
Jump ........... Displays a list of slides while you are playing back.
Select .......... Displays a list of folders while you are playing back.
Drive ............ Switches between PC Card slot 1 and 2.
Setup ........... Displays the Viewer Options dialog box on Page 2 of the
Setup dialog box.
Delete .......... Deletes a captured slide(s) or all the captured slides in
the Capture - specific folder.
View ............ Hides the tool bar while you are playing back. Pressing
the MENU button or clicking with the right button of a
mouse shows it again.
NOTE: If no memory card is inserted in the PC CARD slot, there is no signal, and
a black, blue or logo background is displayed, depending on the setting.
Playback is stopped when SLIDE +/- button on the remote control or 
 button
on the cabinet is pressed in Auto Play mode.
Up to 12 indexes can be displayed on the list of folders. The folder in the right
bottom is always a folder exclusively for captured images, but is only displayed
when images have been captured.
When the tool bar is not displayed:
Press the FOLDER LIST button or the SLIDE LIST button on the re-
mote control to display folders or from a PC card in the projectors PC
Card slot.
SLIDE
Folder
02 : 0001 / 0008Folder Folder Folder
Folder
Multi cursor (blue marks)
Current folder number
Current slide
numberNumber of all slides in
folder
SlideSlide Slide Slide
Slide
SlideSlideSlide
02 : 0004 / 0008
Slide(Table) cursor
(green marks)
Folder
FOLDER
Use the SLIDE +/- button to advance to the next folder or return to the
previous folder.
Use the SLIDE +/- button to advance to the next slide or return to the
previous slide.DragPrev Play Jump Drive
View
Next Stop SelectDelete
Setup 
						

							E-32
NOTE: You can also use the  and  button on the remote control to select
folders or slides.
If you use the 
 and  button on the remote control for Viewer operation, pressthe PJ button to switch to the Projector mode and the PJ button lights red.
Lit red Works as the Select button on the
projector.
ENTERCANCEL
SELECT
PJ
Auto Play Mode
If the Auto Play option is selected in Viewer Options of the menu,
any given slide will start to play automatically.
You can also specify Auto Play Interval between 5 and 300 seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the
picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides
and moving pictures from a VCR, etc., it is possible to switch from a
Viewer slide to the video picture then back to the Viewer slide simply by
using the Viewer button.
NOTE: Even if you switch the current Viewer source to another source, the cur-
rent slide is retained. When you return back to the Viewer, you will get the slide
that has been retained.
The PC card editing operation cannot be performed from the projector.
Do so using the Dynamic Image Utility 2.0 software.
Viewing Digital Images
Digital images can be played with the Viewer if the following conditions
are met:
•If the image can be stored on an MS-DOS format PC card
•If the image can be stored in a format supported by the Viewer. With
the Viewer, images on the card are searched for in directories and
images in JPEG or BMP format are recognized as slides. Searchable
directories are directories within two steps from the root directory,
and searchable images are images within the first 12 files in the di-
rectory. Only file and slide switching are possible.
NOTE: The maximum number of images recognized as slides within one direc-tory is 128.
Storing Images Displayed on the Projector on the PC
card (Capture)
The Capture features allows you to capture an image from a source that
is currently being displayed. The image is saved as JPEG in the PC
card. When you select Capture from the menu, you will get a tool bar.
You can capture an image directly using the tool bar when the menu is
not displayed.
NOTE:
*Unless a PC card is inserted into the PC Card slot of the projector, the Capture
feature is not available.
*The Card Error display means that the free space of the PC card is insufficient
for saving images. Make more space available on the card by erasing un-
wanted images with your PC. The number of images that can be captured
depends on the size of the PC card.
*Be sure not to turn off the power or remove the PC card while capturing an
image. Doing so could cause a loss of the data in the PC card or damage to the
card itself.
Preparations:
Insert the PC card into the card slot.
Insert the PC card so that the end with the insertion direction arrow
on the top goes in first.
* Press the eject button to eject the card.
1. Project the image you wish to store on the projector.
2. Select the Capture from the Tools menu.
3. A tool bar will appear.
Drag
Freeze
Exit
Capture
Drive
The tool bar includes the following buttons:
Drag ............ Drags to move the tool bar by clicking on the blue part (for
USB mouse operation only).
Capture ....... Captures an image and save it as a JPEG file on a PC
card.
Freeze ......... Freezes and unfreezes images.
Drive ............ Switches between PC Card slot 1 and 2.
Exit .............. Exits the Capture function. Another option to exit the Cap-
ture function is to press MENU or CANCEL button on the
remote control or projector cabinet.
NOTE:
You can compress a captured file (JPEG) using the Capture Options in the Setup
dialog. See page E-46.
Captured images with higher resolution than the projectors native resolution
cannot be displayed correctly.
•File size of the captured image varies depending on the resolution of an input
signal.
•An hourglass indicating that an image is being captured appears on the
projectors display. Do not eject the PC card or turn off the projectors power
while this icon is displayed. Doing so will damage the PC card data. If the PC
card data is damaged, use a computer to repair the data.
•Up to 12 indexes can be displayed on the list of folders. The folder in the right
bottom is always a folder exclusively for captured images, but is only dis-
played when images have been captured. 
						

							E-33
Deleting Captured Images
Using the Delete button on the tool bar for Viewer can delete captured
images.
To delete captured images:
1. Select Viewer and display a folder list of captured images.
2. Use 
 button to select the Capture folder [Cap] in the right bottom of
the screen.
3. Press the MENU button to display the tool bar.
4. Use the 
 or  button to select the Delete icon and press the EN-
TER button or click with a mouse button.
Using the PC Card Files Fucntion (PC Card Files)
The PC Card Files function allows you to display a list of all the files
stored in the PC card so that you can select a file you want to display.
You can also sort files by file name or date, or display the file. Although
a list of all the files in the PC card is displayed, you can view files in idx,
text, HTML, JPEG and BMP format only. Selecting BMP and JPEG files
automatically switches to the Viewer source. See also page E-39.
NOTE: This option is not available for selection unless a PC card is insertedproperly.
Selecting Execute displays the file you selected.
When you select a JPEG or BMP file and press the ENTER button on
the remote or the cabinet, or Execute on the above, you will get a
toolbar. This toolbar is used to return to the PC Card Files screen.
DragPrev Play Jump Drive
View
Next Stop SelectDelete
Setup
Drag ............ Drags to move the tool bar. (for USB mouse operation
only)
Return ......... Returns to the PC Card Files screen.
Close ........... Close the toolbar.
Drag
ReturnClose 
						

							E-34
USING ON-SCREEN MENU
Basic Menu Operation
Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced mo-tion video image is projected.
1. Press the MENU button on the remote control or projector cabinet to
display the Basic, Advanced or Custom Menu.
NOTE: When using a USB mouse, click the mouse button to display the menu.For other operations, do the same way as you use your PC mouse.
2. Press the SELECT 

 buttons on the remote control or the projec-
tor cabinet to highlight the menu for the item you want to adjust or
set.
3. Press the SELECT 
 button or the ENTER button on the remote
control or the projector cabinet to select a submenu or item.
4. Adjust the level or turn the selected item on or off by using SELECT
 or  buttons on the remote control or the projector cabinet.
The on-screen slide bar will show you the amount of increase or
decrease.
5. Changes are stored until you adjust it again.
ENTER .......... Stores the setting or adjustments.
CANCEL ........ Return to the previous screen without storing settings
or adjustments.
NOTE: You can close the main and sub menus simultaneously by pressingthe PJ button on the remote control to cancel the Projector mode.
6. Repeat steps 2-5 to adjust an additional item, or press the CANCEL
button on the projector cabinet or the remote control to quit the menu
display.
Customizing the Menu
The Custom menu can be customized to meet your requirements. Se-
lecting a menu item from the Custom Menu Edit list, allows you to
custom tailor the menu items to your needs.
1.Select Custom Menu Edit to display the Custom Menu Edit screen.
2. Use the SELECT 

 or  buttons to highlight your selection and press
the ENTER button to place a check mark next to an option.
This action enables that feature. Press the ENTER button again to
clear the check box.
If you select an item with a solid triangle 
 and press the ENTER
button on the remote control or the projector cabinet, you can enable
all the items within that submenu. Also you can turn on an item within
the submenu without placing a check mark on the main menu item.
NOTE: Up to 12 main menu items (within Custom Menu Edit, not includingsubmenu items) can be selected.
3. In order for the changes to take effect, use the SELECT 
 or  but-
ton on the remote control or the projector cabinet to highlight OK,
then press the ENTER button. To cancel the changes, use the SE-
LECT 

 or  buttons to highlight Cancel and press the ENTER
button.
To return to the factory default, select Reset then press the ENTER
button.
The default Custom Menu items are:
Source Select (RGB 1/2, Video, S-Video, DVI(DIGITAL), Viewer and
LAN), Picture, Sound, Image Options (Aspect Ratio), Picture Manage-
ment, Projector Options (3D Reform, Menu, Setup, Lamp Setting, Screen
and LAN Mode), Tools (Sleep Timer, Capture, PC Card Files and
ChalkBoard) and Help (Contents and Information).
NOTE: Once you have selected OK on the Custom Menu Edit screen, you cannot
cancel the changes on the Menu screen. However, you can reedit the menu items
over again as described in the steps above.
NOTE: If the Advanced Menu item has been selected on the Menu mode, you
get the Confirmation Change Menu upon completion of Custom Menu editing.
In this case, selecting Yes then ENTER will close all the menus and apply the
changes from the Advanced menu to the Custom Menu. If you select No then
ENTER functions, then all menu items will return to the Advanced menu, but
your changes will still be available within the Custom Menu selection. To dis-
play the previously tailored Custom Menu, select Custom Menu from the Menu
Mode.
An item To Advanced Menu will be added to the bottom of the Custom
Menu.
Selecting this item and pressing the ENTER button will display the Ad-
vanced Menu features. 
						

							E-35
Menu tree
Brightness, Contrast, Color,
Hue, Sharpness
4:3, Letterbox, Wide Screen, Crop / 4:3 
Window, Letterbox, Wide Screen, 4:3 Fill
Top, Bottom, Left, Right
Horizontal, Vertical, Clock, Phase
Auto, Native
0%, 5%, 10%, 25%
Off, Less, More
Off, Low, Medium, High
RGB, Component
Advanced Menu
Source Select
Picture
Sound
Image Options
Picture Management
Projector Options
Tools
Help
Factory DefaultRGB1
RGB2
Video
S-Video
DVI (DIGITAL)
Viewer
LAN
more
Aspect Ratio
Blanking
Position/Clock
Resolution
Overscan
Video Filter
Noise Reduction
Signal Type
Picture
Presentation, sRGB, Graphic, Video,
Movie, User 1, User 2, User 3, User 4Picture Management
Volume, Bass, Treble
User1
User2
User3
Entry List 
						

							E-36
Advanced Menu
Source Select
Picture
Sound
Image Options
Picture Management
Projector Options
Tools
Help
Factory Default
3D Reform
Wall Color Correction
Menu
Setup
Lamp Setting
Screen
Auto Functions
LAN Mode
Password
SecurityMenu
Setup
Cornerstone
Keystone
Off, User 1, User 2, User 3, User 4 (Auto  Adjust Button)
Page 1
Language
Menu Mode
Projector Pointer
Mouse Pointer
Menu Display TimeEnglish, Deutsch,
Français, Italiano,
Español, Svenska
Basic Menu,
Custom Menu,
Advanced Menu
Custom Menu Edit
Pointer 1-9
Pointer 1-9
Manual, Auto 5sec,
Auto 15sec,
Auto 45sec
Horizontal, Vertical
Page 2
Source Display
Message
Menu Color SelectOn, Off
On, Off
Color, Monochrome
Page 1
Orientation
Background
RGBOUT Terminal
Closed CaptionDesktop Front, Ceiling Rear,
Desktop Rear, Ceiling Front
Blue, Black, Logo
Last, RGB1, RGB2
Off, Caption1-4, Text1-4
Page 3   Signal Select
RGB1
RGB2
Video,
S-VideoRGB/Component, RGB, Component, Scart
RGB/Component, RGB, Component, Scart
Auto, PAL-M/PAL-N/NTSC3.58, NTSC3.58, 
NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
Page 5  
Remote Sensor
S-Video Mode Select
Front, Back, Left, Right
Off, S2
Page 6
Communication Speed
Default Source Select
Control Panel
Key Lock4800, 9600, 19200, 38400
Last, Auto, Select (RGB1, RGB2,Video,
S-Video, DVI(DIGITAL), Viewer, LAN)
Enable, Disable
Page 4
Auto Adjust, Auto Start, Power Management,
Power Off Confirmation, 3D Reform Save,
High Speed Fan Mode, Built-in Speaker, Idle Mode,
Clear Filter Usage Meter
Page 2
Viewer Options
Capture Options
Mouse
Operation Mode Select
Show Folder List
Auto Play, Manual Play, Interval
High Quality, Normal,
High Compression
Right Hand, Left Hand
Fast, Medium, Slow
Auto, Projector
Button
Sensitivity