NEC Medical Center System Operations Manual

NDA-30026   Revision 6 Appendix Page 9
Medical Center System Operations Manual - JAVA Edition
Error and User 
Interface 
MessagesThis section contains a list of error messages that might appear during some beeper 
operations.
Beeper Interface Not Installed - The beeper interface software that would 
handle the communications between UAP Applications and the local beeper 
terminal is either not installed or has not been installed properly.
Beeper Interface Offline - The beeper terminal is not...

Appendix Page 10 NDA-30026   Revision 6
Medical Center System Operations Manual - JAVA Edition
Interface 
ConfigurationA special UNIX user account, bpradm, allows access to configurable interface 
data. This section presents most of the screens that you might need to access during 
installation and support of the interface.
Main Menu
After logging into the UNIX system with the user account name bpradm, the 
following menu displays.
Figure A-8   Beeper Interface Administration Menu
In the figure above,...

NDA-30026   Revision 6 Appendix Page 11
Medical Center System Operations Manual - JAVA Edition
Configuration 
MenuSelecting Configuration displays the following menu of options:
Figure A-9   Configuration Menu
Valid commands or options are indicated by the bold underlined letters. Each 
option is discussed in detail below.
Configuration Files
To modify the configuration files enter “C” at the Enter Option prompt. All the 
configuration files, will be displayed as shown in the following window:
Figure...

Appendix Page 12 NDA-30026   Revision 6
Medical Center System Operations Manual - JAVA Edition
Once the configuration file update is complete, you will be returned to the 
Configuration Main Menu. 
Miscellaneous Parameters
To modify the miscellaneous parameters enter “M” at the Enter Option prompt. 
The window shown below will be displayed. Once you have entered the parameters 
you will be returned to the Configuration Main Menu. 
Figure A-11   Misc Parameters Window
These miscellaneous parameters are...

NDA-30026   Revision 6 Appendix Page 13
Medical Center System Operations Manual - JAVA Edition
Port Parameters
To modify the port parameters enter “P” at the Enter Option prompt. The window 
shown below will be displayed. 
Figure A-12   Port Parameters Window
The port parameters are also vendor specific. In most cases the default values 
should work. Once you have entered the parameters you will be returned to the 
Configuration Main Menu. 
Timer Parameters
To modify the timer parameters enter “T” at the...

Appendix Page 14 NDA-30026   Revision 6
Medical Center System Operations Manual - JAVA Edition
The timer parameters relate to the TAP message format. These timing variables 
might require coordination with the vendor specific beeper terminal data. Once you 
have entered the parameters you will be returned to the Configuration Main 
Menu.
Viewing Transaction Log Files
You can view the current transaction log by selecting View Log File option from 
the main screen. Three log files are saved by the beeper...

NDA-30026   Revision 6 Appendix Page 15
Medical Center System Operations Manual - JAVA Edition
Select the log file that you want to view. A screen similar to the following displays. 
You can use PgUp and PgDn as well as command line options that are listed across 
the bottom of the display. These options are described below:
Figure A-15   Beeper Transaction Log
The AutoScroll feature allows you to view the file in real-time. As new messages 
are received, they display at the bottom of the screen. The...

Medical Center System Operations Manual - JAVA Edition
Appendix Page 16 NDA-30026   Revision 6
This Page Left Blank.