NEC M352ws Projector Users Manual

							50
3. Convenient Features
•	NAME
PROJECTOR	NAMEEnter	a	name	 for	your	 projector	 so	that	 your	 computer	 can	identify	 the	projector. 	A	
projector	name	must	be	16	characters	or	less. 	
TIP:	Projector	name	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
HOST	NAMEEnter	 the	hostname	 of	the	 network	 connected	 to	the	 projector. 	A	 host	 name	 must	be	
15 or less.
DOMAIN	NAMEEnter	 the	domain	 name	of	the	 network	 connected	 to	the	 projector. 	A	 domain	 name	
must	be	60	characters	or	less.
•	ALERT	MAIL
ALERT	MAIL	(English	
only)
This	option	 will	notify	 your	computer	 of	lamp	 replace	 time	or	error	 messages	 via	e-mail	
when	using	wireless	or	wired	LAN. 	
Placing	a	checkmark	will	turn	on	the	Alert	Mail	feature.
Clearing	a	checkmark	will	turn	off	the	Alert	Mail	feature.
Sample	of	a	message	to	be	sent	from	the	projector:
The	lamp	is	at	the	end	of	its	usable	life. 	Please	replace	the	lamp.
Projector	Name:	NEC	Projector
Lamp	Hours	Used: 	100	[H]
SENDER’S	ADDRESSEnter	sender’s	address. 	
SMTP	SERVER	NAMEEnter	the	SMTP	server	name	to	be	connected	to	the	projector.
RECIPIENT’S	ADDRESS	
1,2,3
Enter	your	recipient’s	address. 	Up	to	three	addresses	can	be	entered.
TEST	MAILSend	a	test	mail	to	check	whether	your	settings	are	correct	or	not
NOTE:
•	 If	you	execute	 a	test,	you	may	not	receive	 an	Alert	mail.	Should	this	 happen,	check	if	 network	
settings	are	correct.
•	 If	you	entered	 an	incorrect	 address	in	a	test,	 you	may	 not	receive	 an	Alert	 mail.	 Should	 this	
happen,	check	if	the	Recipient’s	Address	is	correct.
SAVEClick	this	button	to	reflect	the	above	settings.
•	NETWORK	SERVICE
PJLink	PASSWORDSet	a	password	 for	PJLink*. 	A	 password	 must	be	32	characters	 or	less. 	Do	 not	 forget	
your	password. 	However,	if	you	forget	your	password,	consult	with	your	dealer.
HTTP	PASSWORDSet	a	password	for	HTTP	server. 	A	password	must	be	10	characters	or	less.
AMX	BEACONTurn	on 	or 	off 	for 	detection 	from 	AMX 	Device 	Discovery 	when 	connecting 	to 	the 	network	
supported	by	AMX’s	NetLinx	control	system.
TIP:	
When	 using	a	device	 that	supports	 AMX	Device	 Discovery,	 all	AMX	 NetLinx	 control	system	 will	rec-
ognize	the	device	and	download	the	appropriate	Device	Discovery	Module	from	an	AMX	server.
Placing	a	checkmark	will	enable	detecting	the	projector	from	AMX	Device	Discovery.
Clearing	a	checkmark	will	disable	detecting	the	projector	from	AMX	Device 	Discovery.
Image	Express	Utility	LiteClick	“DOWNLOAD” 	to	 display	 the	download	 page	from	which	 the	EXE	 file	of	Image	
Express	 Utility	Lite	can	be	downloaded	 to	your	 USB	 memory	 connected	 to	your	 com-
puter. 	(→	page	60)
SAVE
Click	this	button	to	reflect	the	above	settings.
*	 What	is	PJLink?	 PJLink	 is	a	standardization	 of	protocol	 used	for	controlling	 projectors	of	different	 manufacturers. 	This	 standard	 protocol	is	estab-lished	by	Japan	Business	Machine	and	Information	System	Industries	Association	(JBMIA)	in	2005.	 The	projector	supports	all	the	commands	of	PJLink	Class	1.	 Setting	of	PJLink	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu. 
						

							51
3. Convenient Features
CRESTRON	ROOMVIEW	compatibility
The	projector	 supports	CRESTRON	 ROOMVIEW,	 allowing	multiple	devices	connected	 in	the	 network	 to	be	 managed	
and	controlled	from	a	computer	or	a	controller.
For	more	information,	visit	http://www.crestron.com

Access	to	the	HTTP	server	function,	and	make	necessary	settings	for	[CRESTRON]	in	[NETWORK	SETTINGS].
•	ROOMVIEW	for	managing	from	the	computer.
DISABLEDisables	ROOMVIEW.
ENABLEEnables	ROOMVIEW.
•	CRESTRON	CONTROL	for	managing	from	the	controller.
DISABLEDisables	CRESTRON	CONTROL.
ENABLEEnables	CRESTRON	CONTROL. 	
IP	ADDRESSSet	your	IP	address	of	CRESTRON	SERVER.
IP	IDSet	your	IP	ID	of	CRESTRON	SERVER.
TIP:	The	CRESTRON	settings	are	required	only	for	use	with	CRESTRON	ROOMVIEW.
For	more	information,	visit	http://www.crestron.com
•	INFORMATION
WIRED	LANDisplay	a	list	of	settings	of	wired	LAN	connection.
WIRELESS	LANDisplay	a	list	of	settings	of	wireless	LAN	connection.
UPDATEReflect	settings	when	they	are	changed. 
						

							52
3. Convenient Features
❿ Controlling the Projector over a LAN (PC Control Utility Pro 4/
Pro 5)
Using	 the	utility	 software	 “PC	Control	 Utility	Pro	4”	and	 “PC	 Control	 Utility	Pro	5”	included	 on	the	 companion	 NEC	
Projector	CD-ROM,	the	projector	can	be	controlled	from	a	computer	over	a	LAN.
PC	Control	Utility	Pro	4	is	a	program	compatible	with	 Windows.	(→	this	page)
PC	Control	Utility	Pro	5	is	a	program	compatible	with	Mac	OS. 	(→	page	55)
Control Functions
Power	On/Off,	 signal	selection,	 picture	freeze,	 picture	mute,	audio	mute,	 adjusting,	 error	message	 notification,	 event	
schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	 provides	 an	outline	 of	preparation	 for	use	 of	PC	 Control	 Utility	Pro	4/Pro	 5.	For	 information	 on	how	 to	use	
PC	Control	Utility	Pro	4/Pro	5,	see	Help	of	PC	Control	Utility	Pro	4/Pro	5. 	(→	page	54, 55)
Step	1:	Install	PC	Control	Utility	Pro	4/Pro	5	on	the	computer.
Step	2:	Connect	the	projector	to	a	LAN.
Step	3:	Start	PC	Control	Utility	Pro	4/Pro	5.
•	 To	run	PC	Control	 Utility	Pro	4	on	 Windows	 8	and	 Windows	 XP,	“Microsoft	 .NET	Framework	 Version	2.0”	is	 required. 	
The	Microsoft	 .NET	Framework	 Version	2.0,	3.0	or	3.5	 is	available	 from	Microsoft’s	 web	page. 	Download	 and	install	
the	it	on	your	computer. 	
TIP:
•	 PC	Control	Utility	Pro	4	can	be	used	with	a	serial	connection.
Using on Windows
Step 1: Install PC Control Utility Pro 4 on the computer
NOTE:
•	 To	install	 or	uninstall	 the	program,	 the	Windows	 user	account	 must	have	[Administrator]	 privilege	(Windows	 8,	Windows	 7,	
Windows	Vista	and	Windows	XP)
•	 Exit	all	running	programs	before	installation.	If	another	program	is	running,	the	installation	may	not	be	completed.
1	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
 The menu window will be displayed. 
						

							53
3. Convenient Features
TIP:
If	the	menu	window	will	not	be	displayed,	try	the	following	procedure.
For	Windows	7:
1.	 Click	“start”	on	Windows.
2.	 Click	 “All	Programs” 	→	“Accessories” 	→	“Run”.
3.	 Type 	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	in 	“Name”. 	(example: 	Q:\
LAUNCHER.EXE)
4.	 Click	 “OK”.
 the menu window will be displayed.
2	 Click	 “PC	Control	Utility	Pro	4” 	on	the	menu	window.
 The installation will start.
 When the installation is complete, the Welcome window will be displayed.
3	 Click	 “Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
	 Read	“END	USER	LICENSE	AGREEMENT” 	carefully.
4	 If	you	agree,	click	“I	accept	the	terms	in	the	license	agreement” 	and	then	click	“Next”.
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.
•	 When	the	installation	is	complete,	you	will	return	to	the	menu	window.
TIP:
•	Uninstalling	PC	Control	Utility	Pro	4
To	uninstall	 PC	Control	 Utility	Pro	4,	do	 the	 same	 procedures	 stated	as	in	“Uninstalling	 Virtual	Remote	 Tool”.	Read	“Virtual	 Remote	
Tool”	as	“PC	Control	Utility	Pro	4”	(→	page	39) 
						

							54
3. Convenient Features
Step 2: Connect the projector to a LAN.
Connect	the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	123),	 “Con-
necting	 to	a	Wireless	 LAN	(Optional: 	NP02LM	 series)”	(→	page	124)	 and	 “9.	Controlling	 the	Projector	 by	Using	 an	
HTTP	Browser” 	(→	page	45)
Step 3: Start PC Control Utility Pro 4
Click	“Start” 	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“PC	 Control	 Utility	Pro	4”	→ 
“PC	Control	Utility	Pro	4”.
NOTE:	
•	 For	 the	Schedule	 function	of	the	 PC	Control	 utility	Pro	4	to	 work,	 you	must	 have	your	computer	 running	and	not	in	standby/
sleep	 mode.	 Select	“Power	 Options”	 from	the	“Control	 Panel”	in	Windows	 and	disable	 its	standby/sleep	 mode	before	 running	 the	
scheduler.
[Example]	For	Windows	7:
Select	“Control	 Panel”	→	“System	 and	Security”	→	“Power	 Options”	→	“Change	 when	the	computer	 sleeps”	→	“Put	 the	computer	
to	sleep”	→	“Never”.	
NOTE:	
•	 When	 [NORMAL]	 is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 cannot	be	turned	 on	via	 the	 network	 (wired	LAN/
wireless	LAN)	connection.
TIP:
Viewing	the	Help	of	PC	Control	Utility	Pro	4
•	 Displaying	the	Help	file	of	PC	Control	Utility	Pro	4	while	it	is	running.
	 Click	 “Help	(H)” 	→	“Help	(H)	…” 	of	window	of	PC	Control	Utility	Pro	4	in	this	order.
 The pop-up menu will be displayed.
•	 Displaying	the	help	file	using	the	Start	Menu.
	 Click	 “Start”	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“PC	 Control	 Utility	Pro	4”	→ 
“PC	Control	Utility	Pro	4	Help”.
  The Help screen will be displayed. 
						

							55
3. Convenient Features
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	in	your	Mac	CD-ROM	drive.
	 The	CD-ROM	icon	will	be	displayed	on	the	desktop.
2.	 Double-click	the	CD-ROM	icon.
 The CD-ROM window will be displayed.
3.	 Double-click	the	 “Mac	OS	X”	folder.
4.	 Double-click	 “PC	Control	Utility.mpkg”.
 The installer will start.
5.	 Click	 “Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
6.	 Read	“END	USER	LICENSE	AGREEMENT” 	and	click	“Next”.
 The confirmation window will be displayed
7.	 Click	 “I	accept	the	terms	in	the	license	agreement”.
 Follow the instructions on the installer screens to complete the installation.
Step 2: Connect the projector to a LAN
Connect	 the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	123),	 “Con-
necting	 to	a	Wireless	 LAN	(Optional: 	NP02LM	 series)”	(→	page	124)	 and	 “❾	Controlling	 the	Projector	 by	Using	 an	
HTTP	Browser” 	(→	page	45)
Step 3: Start PC Control Utility Pro 5
1.	 Open	your	Applications	folder	in	Mac	OS.
2.	 Click	the	“PC	Control	Utility	Pro	5” 	folder.
3.	 Click	the	“PC	Control	Utility	Pro	5” 	icon.
 PC Control Utility Pro 5 will start.
NOTE:	
•	 For	 the	Schedule	 function	of	the	 PC	Control	 utility	Pro	5	to	 work,	 you	must	 have	your	computer	 running	and	not	in	sleep	 mode.	
Select	“Energy	Saver”	from	the	“System	Preferences”	in	Mac	and	disable	its	sleep	mode	before	running	the	scheduler.
•	 When	 [NORMAL]	 is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 cannot	be	turned	 on	via	 the	 network	 (wired	LAN/
wireless	LAN)	connection.
	
TIP:
Viewing	the	Help	of	PC	Control	Utility	Pro	5
•	Displaying	the	Help	file	of	PC	Control	Utility	Pro	5	while	it	is	running. 	
•	 From	the	menu	bar,	click	“Help” 	→	“Help” 	in	this	order. 	
 The Help screen will be displayed.
•	Displaying	the	Help	using	the	Dock	
1.	 Open	 “Application	Folder” 	in	Mac	OS.
2.	 Click	the	“PC	Control	Utility	Pro	5” 	folder.
3.	 Click	the	“PC	Control	Utility	Pro	5	Help” 	icon.
 The Help screen will be displayed. 	 
						

							56
3. Convenient Features
⓫ Projecting Your Computer’s Screen Image from the 
Projector over a LAN (Image Express Utility Lite)
 
Using	Image	 Express	 Utility	Lite	contained	 on	the	 supplied	 NEC	Projector	 CD-ROM	 allows	you	to	send	 the	computer’s	
screen	image	and	sound	to	the	projector	over	a	USB	cable	or	a	wired	or	wireless	LAN.
Image	Express	Utility	Lite	is	a	program	compatible	with	 Windows.
Image	Express	Utility	Lite	for	Mac	OS	is	a	program	compatible	with	Mac	OS. 	(→	page	61)
This	section	 will	show	 you	an	outline	 about	how	to	connect	 the	projector	 to	a	LAN	 and	to	use	 Image	 Express	 Utility	
Lite.	For	the	operation	of	Image	Express	Utility	Lite,	see	the	help	of	Image	Express	Utility	Lite.
Step	1: 	install	Image	Express	Utility	Lite	on	the	computer. 	
Step	2:	Connect	the	projector	to	a	LAN.
Step	3:	Start	Image	Express	Utility	Lite.
TIP:
•	 Image	 Express	Utility	Lite	(for	Windows)	 can	be	started	 from	most	 commercially	 available	removable	 media	such	as	USB	 memory	
devices	or	SD	cards	without	the	need	to	install	on	your	computer.	(→	page	59)
What You can Do with Image Express Utility Lite
•	Image	transmission	(for	 Windows	and	Mac	OS)
•	 The	screen	of	your	 computer	 can	be	sent	 to	the	 projector	 via	a	wired	 or	wireless	 network	without	a	computer	 cable	
(VGA).
•	 By	using	“EASY	 CONNECTION” 	function,	 the	complicated	 network	settings	can	be	simplified	 and	the	computer	
will	automatically	connect	to	the	projector.
•	 The	screen	of	your	computer	can	be	sent	to	up	to	four	projectors	at	the	same	time.
•	Audio	transfer	capability	(for	 Windows	only)
•	 Image	Express	Utility	Lite	allows	 you	to	send	 the	computer’s	 screen	image	and	audio	 to	the	 projector	 over	wired/
wireless	LAN	or	USB	connection.
•	 Audio	 transfer	capability	 is	available	 only	when	 the	computer	 connects	with	the	projector	 in	peer-to-peer	 net-
work.
•	USB	Display	(for	 Windows	only)
•	 Computer’s	screen	image	and	audio	 can	be	projected	 via	a	USB	 cable,	 without	 connecting	 a	computer	 cable	
(VGA).
•	 Just	connecting	 the	computer	 and	the	projector	 over	a	USB	 cable	 will	make	 the	USB	 Display	 function	 available	
(Plug	&	Play)	even	without	installing	Image	Express	Utility	Lite	on	the	computer. 	(→	page	43)
•	Geometric	Correction	Tool	[GCT]	(for	Windows	only)
See	“⓬	Projecting	an	Image	from	an	Angle	(Geometric	Correction	 Tool	in	Image	Express	Utility	Lite)”. 
						

							57
3. Convenient Features
Using on Windows
Step 1: install Image Express Utility Lite on the computer. 
NOTE:
•	 To	install	 or	uninstall	 the	program,	 the	Windows	 user	account	 must	have	“Administrator”	 privilege	(Windows	 8,	Windows	 7,	
Windows	Vista	and	Windows	XP).	
•	 Exit	all	running	programs	before	installation.	If	another	program	is	running,	the	installation	may	not	be	completed.	
•	 Image	Express	Utility	Lite	will	be	installed	to	the	system	drive	of	your	computer.
	 If	the	message	 “There	is	not	 enough	 free	space	 on	destination”	 is	displayed,	 free	up	enough	 space	(about	 100	MB)	 to	install	 the	
program.
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
 The menu window will be displayed.
TIP:
If	the	menu	window	will	not	be	displayed,	try	the	following	procedure.
For	Windows	7:
1.	Click	 “start” 	on	Windows.
2.	Click	 “All	Programs” 	→	“Accessories” 	→	“Run”.
3.	 Type 	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	 	in 	“Name”. 	(example: 	Q:\
LAUNCHER.EXE)
4.	 Click	 “OK”.
 The menu window will be displayed.
2.	 Click	 “Installing	Image	Express	Utility	Lite” 	on	the	menu	window.
 The installation will start.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.	
	 Read	“END	USER	LICENSE	AGREEMENT” 	carefully	
3.	 If	you	agree,	click	“I	agree.” 	and	then	click	 “Next”.	
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation. 	
•	 When	the	installation	is	complete,	you	will	return	to	the	menu	window.
 When the installation is complete, a completion message will be displayed.
4.	 Click	 “OK”.
 This completes the installation.
TIP:
•	Uninstalling	Image	Express	Utility	Lite
To	uninstall	 Image	Express	 Utility	Lite,	do	the	 same	 procedures	 stated	as	in	“Uninstalling	 Virtual	Remote	 Tool”.	Read	“Virtual	 Remote	
Tool”	as	“Image	Express	Utility	Lite”	(→	page	39)
Step 2: Connect the projector to a LAN.
Connect	 the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	123),	 “Con-
necting	 to	a	Wireless	 LAN	(Optional: 	NP02LM	 series)”	(→	page	124)	 and	 “9.	Controlling	 the	Projector	 by	Using	 an	
HTTP	Browser” 	(→	page	45) 
						

							58
3. Convenient Features
Step 3: Start Image Express Utility Lite.
1.	 On	Windows, 	click	 “Start” 	→	“All	 programs” 	→	“NEC	 Projector	 UserSupportware” 	→	“Image	 Express	 Utility	
Lite”	→	“Image	Express	Utility	Lite”.
	 Image	Express	Utility	Lite	will	start.
	 The	select	window	for	network	connection	will	be	displayed
2.	 Select	Network	and	click	 “OK”.
 The select window for destination will show a list of connectable projectors.
•	 When	connecting	the	computer	directly	to	the	projector	by	one-to-one,	 “Easy	Connection”	is	recommended.
•	 When	one	or	more	 networks	 for	“EASY	 CONNECTION” 	are	 found, 	the	 “Easy	 Connection	 Selection	Screen”	
window	will	be	displayed.
•	 To	check	 for	the	 network	 available	 for	connected	 projectors,	from	 the	menu, 	select	 [INFO.]	→	[WIRELESS	
LAN]	→	[SSID].
3.	 Select	the	network	you	wish	to	connect, 	and	click	“Select”.
 The target selection window will be displayed.
4.	 Place	a	check	mark	for	projectors	to	be	connected, 	and	then	click	“Connect”.
•	 When	one	or	more	 projectors	 are	displayed,	 from	the	menu	 on	the	 projector,	 select	[INFO.]	→	[WIRELESS	 LAN]	
→	[IP	ADDRESS].
 When connecting with the projector is established, you can operate the control window to control the projector. (→ 
page 44)
NOTE:
•	 When	 [NORMAL]	 is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 that	is	turned	 off	will	 not	be	displayed	 in	the	
select	window	for	destination
TIP:
Viewing	the	 “Help”	file	of	Image	Express	Utility	Lite
•	 Displaying	the	Help	file	of	Image	Express	Utility	Lite	while	it	is	running.
	 Click	the	[?]	(help)	icon	on	the	control	window.
 The Help screen will be displayed.
•	 Displaying	the	Help	file	of	GCT	while	it	is	running.
	 Click	 “Help”	→	“Help” 	on	the	edit	window.
 The Help screen will be displayed.
•	 Displaying	the	help	file	using	the	Start	Menu.
	 Click	 “Start”	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“Image	 Express	 Utility	Lite”	
→	“Image	Express	Utility	Lite	Help”.
  The Help screen will be displayed. 
						

							59
3. Convenient Features
Starting Image Express Utility Lite from a USB Memory or SD Card
Image	Express 	Utility 	Lite 	can 	be 	started 	from 	commercially 	available 	removable 	media 	such 	USB 	memory 	or 	SD 	cards	
if	it	is	copied	beforehand. 	This	will	eliminate	the	trouble	of	installing	Image	Express	Utility	Lite	to	your	computer.
1.	 Copy	Image	Express	Utility	Lite	to	removable	media.
	 Copy	 all	the	 folders	 and	files	 (total	 size	approx. 	6MB)	 from	the	“IEU_Lite	 (removable-media)” 	folder	 in	the	 supplied	
NEC Projector CD-ROM to the root directory of your removable media.
2.	 Insert	your	removable	media	into	your	computer.
	 The	 “AutoPlay” 	screen	will	be	displayed	on	your	computer.
TIP:	
•	 If	the	“AutoPlay”	screen	is	not	displayed,	open	the	folder	from	“Computer”	(“My	Computer”	for	Windows	XP).
3.	 Click	“Open	folder	to	view	files”
	 The	IEU_Lite.exe,	other	folder,	and	files	will	be	displayed.
4.	 Double-click	the	 “IEU_Lite.exe”	(	 ) icon.
	 Image	Express	Utility	Lite	will	start.
NOTE:
•	 The	“EASY	CONNECTION”	function	is	not	supported	when	Image	Express	Utility	Lite	is	started	from	removable	media.