NEC M352ws Projector Users Manual

							100
5. Using On-Screen Menu
Selecting Signal Format [COLOR SYSTEM]
This	feature	allows	you	to	select	video	standards	manually.
Normally	select	[AUTO].	Select	the	video	standard	from	the	pulldown	menu. 	
Enabling	or	Disabling	WXGA	Mode	[WXGA	MODE]
Selecting	[ON]	will	give	 priority	 to	WXGA	 (1280	×	768)/WUXGA	 (1920	×	1080)	 signals	 in	recognizing	 an	input	 sig-
nal.
When	 [WXGA	 MODE]	is	set	 to	[ON],	 XGA	(1024	 ×	768)/UXGA	 (1600	×	1200)	 signals	 may	not	be	recognized	 on	
M332XS.	In	this	case,	select	[OFF].
NOTE:	
•	 The	[OFF]	is	selected	at	the	time	of	shipment	of	M332XS.
•	 The	[ON]	is	selected	at	the	time	of	shipment	of	M352WS/M302WS.
Setting	HDMI1/2	[HDMI	SETTINGS]
Make	the	settings	for	each	video	level	when	connecting	HDMI	equipment	such	as	a	DVD	player. 	
VIDEO LEVEL ���������Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-
MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image 
contrast and increase detail in the dark areas�
NOTE:
•	 If	 the	projector	 does	not	reflect	 the	settings	 for	your	 HDMI	 equipment	 such	as	a	DVD	 player	 connected	 to	the	 HDMI	 1	IN	 or	HDMI	
2	IN	connector,	select	the	HDMI1	or	HDMI2	input	source	again	on	the	projector.
Setting Audio [AUDIO SELECT]
Make	 the	settings	 for	each	 audio	 level	when	 connecting	 HDMI	equipment,	 your	network,	 and	USB-B	 port.	Select	
between	each	equipment	and	computer.
HDMI ���������������������Select [HDMI1] or [HDMI2] to switch the HDMI 1 or HDMI 2 IN digital audio signal or select [COMPUTER] 
to switch the COMPUTER input audio signal�
LAN ������������������������Select [LAN] or [COMPUTER] to switch the source connected to the network�
USB-B  ��������������������Select [USB-B] or [COMPUTER] to switch the source connected over the USB cable (USB-B)�
Enabling	Key	Sound	and	Error	Sound	[BEEP]
This	 feature	 turns	on	or	off	 the	 button	 sound	or	alarm	 when	an	error	 occurs	 or	the	 following	 operations	 are	per-
formed.
-	Displaying	the	main	menu	
-	Switching	sources
-	Resetting	data	by	using	[RESET]
-	Pressing	POWER	ON	or	STANDBY	button 
						

							101
5. Using On-Screen Menu
[OPTIONS(2)]
Selecting	Standby	condition	in	[STANDBY	MODE]
The	projector	has	two	standby	modes:	[NORMAL]	and	[NETWORK	STANDBY].
The	[NORMAL]	 mode	is	the	 mode	 that	allows	 you	to	put	 the	projector	 in	the	 power-saving	 condition	which	consumes	
less	power	than	the	[NETWORK	STANDBY]	mode. 	The	projector	is	preset	for	the	[NORMAL]	mode	at	the	factory.
NORMAL �����������������������������POWER indicator: Red light/STATUS indicator: Off
When [NORMAL] is selected, only the following buttons and feature will w\
ork:
POWER button on the projector cabinet and the remote control, and powering on from PC Control 
command�
NETWORK STANDBY  ����������POWER indicator: Orange light/STATUS indicator: Off
When [NETWORK STANDBY] is selected, the projector can be turned on over a wired LAN connec -
tion and only the following buttons, port, and features will work:
POWER  button  on  the  projector  cabinet  and  the  remote  control,  powering  on  from  PC  Control 
command, DIRECT POWER ON, AUTO POWER ON(COMP �), LAN port, wireless LAN unit (optional), 
Virtual Remote Tool, LAN feature, and Mail Alert feature�
Important:
-	 When	[NETWORK	 STANDBY]	is	selected,	 [AUTO	POWER	 OFF]	will	turn	 grey	 in	color	 and	be	disabled,	 and	[0:15]	 will	be	selected	
automatically.
NOTE:	
•	 Even	 when	[NORMAL]	 or	[NETWORK	 STANDBY]	is	selected	 for	[STANDBY	 MODE],	power	on	or	off	 can	 be	done	 by	using	 the	PC	
CONTROL	port.
•	 The	power	consumption	in	the	standby	mode	will	not	be	included	in	calculating	CO2	emission	reduction.
•	 Your	setting	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
Enabling	Direct	Power	On	[DIRECT	POWER	ON]
Turns	 the	projector	 on	automatically	 when	the	power	 cord	is	inserted	 into	an	active	 power	 outlet.	This	 eliminates	 the	
need	to	always	use	the	POWER	button	on	the	remote	control	or	projector	cabinet. 
						

							102
5. Using On-Screen Menu
Turning	On	the	Projector	By	Applying	Computer	Signal	[AUTO	POWER	ON(COMP.)]
When	the	projector	 is	in	 Standby	 mode,	applying	 a	computer	 signal	from	a	computer	 connected	 to	the	 COMPUTER	
IN	input	will	power	on	the	projector	and	simultaneously	project	the	computer’s	image.
This	 functionality	 eliminates	the	need	 to	always	 use	the	POWER	 button	on	the	 remote	 control	or	the	 projector	 cabinet	
to	power	on	the	projector.
To	use	this	function,	first	connect	a	computer	to	the	projector	and	the	projector	to	an	active	AC	input.
NOTE:	
•	 Disconnecting	 a	computer	 signal	from	the	computer	 will	not	power	 off	the	 projector.	 We	recommend	 using	this	function	 in	com-
bination	of	the	AUTO	POWER	OFF	function.
•	 This	function	will	not	be	available	under	the	following	conditions:
-	 when	a	component	signal	is	applied	to	the	COMPUTER	IN	connector
-	 when	a	Sync	on	Green	RGB	signal	or	composite	sync	signal	is	applied
•	 To	enable	the	AUTO	POWER	ON(COMP.)	after	turning	off	the	projector,	wait	3	seconds	and	input	a	computer	signal.
	 If	 a	computer	 signal	is	still	 present	 when	the	projector	 is	turned	 off,	the	AUTO	 POWER	 ON(COMP.)	 will	not	work	 and	the	projector	
remains	in	standby	mode.
Enabling	Power	Management	[AUTO	POWER	OFF]
When	 this	option	 is	selected	 you	can	 enable	 the	projector	 to	automatically	 turn	off	(at	 the	 selected	 time:	5min.,	 10min.,	
15min.,	20min.,	30min.,	60min.)	if	there	is	no	signal	received	by	any	input	or	if	no	operation	is	performed.
NOTE:
•	 This	item	can	be	selected	only	when	[NORMAL]	is	selected	for	[STANDBY	MODE].
•	 When	 [NETWORK	 STANDBY]	is	selected,	 [AUTO	POWER	 OFF]	will	turn	 grey	 in	color	 and	be	disabled	 and	[0:15]	 will	be	selected	
automatically.
Selecting Default Source [DEFAULT SOURCE SELECT]
You	can	set	the	projector	to	default	to	any	one	of	its	inputs	each	time	the	projector	is	turned	on.
LAST ����������������������Sets the projector to default to the previous or last active input each \
time the projector is turned on�
AUTO  ���������������������Searches for an active source in order of COMPUTER  → HDMI1 → HDMI2  → VIDEO → USB-A  → USB-B 
→
 COMPUTER and displays the first found source�
COMPUTER  �����������Displays the computer signal from the COMPUTER IN connector every time the projector is turned on�
HDMI1 �������������������Displays the digital source from the HDMI 1 IN connector every time the projector is turned on� 
HDMI2 �������������������Displays the digital source from the HDMI 2 IN connector every time the projector is turned on� 
VIDEO ��������������������Displays the Video source from the VIDEO IN connector every time the projector is turned on�
USB-A ��������������������Displays slides or plays back movie files from the USB memory device every time the projector is turned 
on�
LAN ������������������������Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit�
USB-B  ��������������������Displays the computer signal from the USB-B port  every time the projector is turned on� 
						

							103
5. Using On-Screen Menu
Setting	carbon	footprint	factor	[CARBON	CONVERT]
Adjusts	the	carbon	 footprint	 factor	in	the	 carbon	 saving	calculation. 	The	 initial	 setting	 is	0.505[kg-CO2/kWh]	 based	on	
the	CO2	Emissions	from	Fuel	Combustion	(2008	Edition)	published	by	OECD.
Selecting	your	currency	[CURRENCY]
Displays	electricity	pricing	(available	in	4	currency	units).
$ ����������������������������US Dollar
€
  ���������������������������EU Euro
JP¥
  ������������������������Japanese Yen
RMB¥
  ��������������������Chinese Yuan
Changing	currency	setting	and	currency	convert	setting	[CURRENCY	CONVERT]
Changes	currency	setting	and	currency	convert	setting	for	CARBON	METER.
The	initial	setting	are	as	follows:
US Dollar ���������������0�11 [$/kWh]
EU Euro  �����������������0�19 [€/kWh]
Japanese Yen
  ���������20 [¥/kWh]
Chinese Yuan
  ���������0�48 [¥/kWh]
The	 initial	 settings	 for	US	 dollar,	 EU	Euro,	 and	Japanese	 Yen	are	based	 on	“Energy	 Prices	and	Taxes	 (second	 quarter	
2010”	published	by	OECD.
The	initial	setting	for	Chinese	 Yuan	is	based	on	“Chinese	Data	File	(2010)” 	published	by	JETRO. 
						

							104
5. Using On-Screen Menu
[3D]
Selecting	input	connected	to	a	source	of	3D	images	[COMPUTER/HDMI1/HDMI2/VIDEO]
[3D]
This	function	switches	the	3D	mode	between	ON	and	OFF	for	each	input.
ON �������������������������Turns on the 3D mode for the selected input�
NOTE:
To	confirm	that	the	supported	3D	signal	is	accepted,	use	either	way	of	the	following:
•	 Make	sure	that	[3D]	is	displayed	in	the	top	right	of	the	screen	after	the 	source	is	selected.
•	 Display	[INFO.]	→	[SOURCE]	→	[3D	SIGNAL]	and	make	sure	that	“SUPPORTED”	is	displayed.
OFF ������������������������Turns off the 3D mode for the selected input�
[GLASSES]
Select	a	3D	glass	method.
DLP® Link ��������������For 3D eyeglasses (ones manufactured by XPAND are recommended) or DLP® Link compatible LCD shutter 
eyeglasses�
Others ��������������������For other LCD shutter eyeglasses such as IR or wired LCD shutter types�
[FORMAT]
Sets	3D	format.
NOTE:	This	option	will	not	work	for	VIDEO	source.
AUTO  ����������������������������������Automatically selects the appropriate format� The supported format is HDMI 3D only �
SIDE BY SIDE ���������������������Selects this format for the SIDE BY SIDE 3D image� SIDE BY SIDE is a format that stores the left 
and right eye images displayed horizontally � Only the half of the horizontal resolution is supported 
TOP AND BOTTOM �������������Selects this format for the TOP AND BOTTOM 3D image� TOP AND BOTTOM is a format that stores the 
left and right eye images displayed vertically � Only the half of the vertical resolution is supported�
FRAME PACKING ����������������Selects this format for the FRAME PACKING 3D image� FRAM PACKING is a format that stores the 
left and right eye images without compression�
FRAME SEQUENTIAL ����������Selects this format for the FRAME SEQUENTIAL 3D image� FRAME SEQUENTIAL is a format that 
displays  the  left  and  right  eye  images  alternately �  This  format  is  available  only  for  COMPUTER 
input�
NOTE:
This	function	will	not	work	for	VIDEO	source.
This	option	is	available	only	when	[DLP®	Link]	is	selected	for	[GLASSES]. 
						

							105
5. Using On-Screen Menu
[L/R	INVERT]
Change	the	setting	if	you	have	difficulty	seeing	3D	images.
NON-INVERT ���������Normal setting�
INVERT ������������������Changes the order of displaying the images for left eye and right eye�
NOTE:
This	option	is	available	only	when	[DLP®	Link]	is	selected	for	[GLASSES]. 
						

							106
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
•	 Consult	with	your	network	administrator	about	these	settings.
•	 When	using	a	wired	 LAN	connection,	 connect	a	LAN	 cable	 (Ethernet	 cable)	to	the	 LAN	 port	(RJ-45)	 of	the	 projec-
tor.	(→	page	123)
TIP:	The	network	settings	you	make	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
[WIRED	LAN][DISABLE]Wired	LAN	connection	will	be	turned	off.
[ENABLE]Wired	LAN	connection	will	be	turned	on.
[SETTINGS] [DHCP]
ON ��������������������������IP address, subnet mask, and gateway will 
be  automatically  assigned  to  the  projector 
from your DHCP server �
OFF �������������������������Specify IP address, subnet mask, and gate-
way  assigned  by  your  network  administra-
tor �
[IP	ADDRESS]Set 	your 	IP 	address 	of 	the 	network 	connected 	to 	the	
projector.
[SUBNET	MASK]Set	 your	 subnet	 mask	number	 of	the	 network	 connected	
to	the	projector.
[GATEWAY]Set	the	default	 gateway	 of	the	 network	 connected	 to	the	
projector.
[AUTO	DNS]ON ��������������������������DHCP  server  will  automatically  assign  IP 
address  of  DNS  server  connected  to  the 
projector �
OFF �������������������������Set your IP address of DNS server connected 
to the projector �
[RECONNECT]Retry	to	connect	the	projector	to	a	network. 
						

							107
5. Using On-Screen Menu
Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless 
LAN Unit equipped) [WIRLESS LAN]
Important
•	 Consult	with	your	network	administrator	about	these	settings.
•	 When	using	a	wireless	LAN	connection,	attach	the	optional	USB	Wireless	LAN	to	the	projector.	(→	page	124)
[PROFILE][DISABLE]Wireless	LAN	connection	will	be	turned	off
[EASY	CONNECTION]Select	[EASY	 CONNECTION]	 to	execute	 a	wireless	 LAN	
easily	using	Image	 Express	 Utility	Lite	on	the	 supplied	
NEC	Projector	CD-ROM.
[SIMPLE	ACCESS	
POINT]
Set	the	projector	for	simple	access	point.
Selecting	 [SIMPLE	ACCESS	 POINT]	will	allow	 the	projec-
tor	to	create	 an	infrastructure	 network.	The	 IP	address	 of	
the	projector	will	be	set	automatically. 	
Select	"Obtain	 an	IP	Address	 Automatically"	 to	set	 the	 IP	
address	of	a	connected	computer. 		
It	takes	 a	few	 seconds	 for	a	change	 of	your	 computer's	 IP	
address	to	come	 into	effect	 in	Windows	 7/Windows	 Vista	
while	it	takes	one	or	two	minutes	in	 Window	XP.	
When	you 	connect 	with 	your 	computer 	to 	save 	your 	profile	
and 	select 	"Automatically 	connect 	when 	within 	range" 	from	
the 	Properties 	tab 	of 	Wireless 	Network 	in 	Windows 	for 	your	
selected 	profile, 	your 	wireless 	LAN 	will 	be 	accessed 	under	
the	following	conditions:
•	 at	 the	time	 of	turning	 on	the	 computer	 or	the	 projec-
tor
•	 when	 the	notebook	 type	is	within	 the	range	 of	the	
projector's	wireless	LAN	can	be	achieved.
Data	 transmission	 between	wireless	LAN	and	wired	 LAN	
is	not	possible. 	
When	the	[SIMPLE	 ACCESS	 POINT]	mode	is	used	 to	
send	images,	 it	is	 recommended	 to	connect	 to	only	 one	
computer.
[PROFILE	1]Up	to	two	 settings	 for	the	 USB	 wireless	 LAN	unit	can	be	
stored	in	memory	of	the	projector. 	(→	page	48)
To	recall	 the	settings	 from	memory,	 select	[PROFILE	 1]	or	
[PROFILE	2]	from	[PROFILE].
[PROFILE	2]
[RECONNECT]Retry	to	connect	the	projector	to	a	network. 	Try	this	if	you	have	changed	[PROFILE].
NOTE: 	After 	selecting 	[EASY 	CONNECTION] 	from 	[PROFILE], 	you 	cannot 	make 	settings 	to 	[DHCP], 	[IP 	ADDRESS], 	[SUBNET 	MASK],	
[GATEWAY],	and	[AUTO	DNS]	except	[CHANNEL].	 
						

							108
5. Using On-Screen Menu
Hints on How to Set Up LAN Connection
To	set	up	the	projector	for	a	LAN	connection:
Access	the	HTTP	 server	 function	 to	display	 the	web	 browser	 (→	page	45)	 and	 select	 [NETWORK	 SETTINGS]	→ 
[SETTINGS]	→	[WIRELESS	LAN]	→	[PROFILE	1]	or	[PROFILE	2].
Two	settings	can	be	set	for	the	USB	 Wireless	LAN	Unit.
Next	select	 [SETTINGS]	 for	your	 selected	 profile,	and	set	[ENABLE]	 or	[DISABLE]	 for	[DHCP],	 [IP	ADDRESS],	
[SUBNET	 MASK],	and	[GATEWAY]. 	Last	 click	 [SAVE]. 	To	 reflect	 changes,	 click	the	[SETTING]	 tab	and	 then	 click	
[APPLY]. 	(→	page	48)
To	recall	LAN	settings	stored	in	the	profile	number:
To	use	 [PROFILE	 1]	or	 [PROFILE	 2]	set	 on	the	 HTTP	 server,	 from	the	projector’ 	menu,	 select	[SETUP]	→	[WIRE-
LESS	 LAN]	→	[PROFILE]	→	[PROFILE	 1]	or	 [PROFILE	 2].	Last	 select	 [YES]	and	press	 the	ENTER	 button.	(→ 
page	107)
To connect a DHCP server:
From	 the	projector	 menu,	select	[SETUP]	→	[WIRED	 LAN]	→	[SETTINGS]	→	[DHCP]	→	[ON] 	and 	press 	the 	ENTER	
button. 	To	specify	IP	address	without	using	the	DHCP	server,	use	the	HTTP	server	function. 	(→	page	45)
To	set	only	for	wireless	LAN	(NETWORK	TYPE	and	WEP/WPA):
Access	the	HTTP	 server	 function	 to	display	 the	web	 browser	 (→	page	45)	 and	 select	 [NETWORK	 SETTINGS]	→ 
[SETTINGS]	→	[WIRELESS	LAN]	→	[PROFILE	1]	or	[PROFILE	2].
Make	necessary	settings	for	[SETTINGS]	and	click	[SAVE].
From	the	projector	menu,	select	[SETUP]	→	[WIRELESS	LAN]	→	[PROFILE]	→	[PROFILE	1]	or	[PROFILE	2]. 	
To select an SSID:
Access	the	HTTP	 server	 function	 to	display	 the	web	 browser	 (→	page	45)	 and	 select	 [NETWORK	 SETTINGS]	→ 
[SETTINGS]	→	[WIRELESS	LAN]	→	[CONNECTION]	→	[SITE	SURVEY]	and	select	the	ID.
If	you	 do	not	 use	 [SITE	 SURVEY],	 type	the	SSID	 in	[CONNECTION]	 and	select	 [INFRASTRUCTURE]	 or	[AD	 HOC]. 	
(→	page	48)
To	receive	lamp	replacement	time	or	error	messages	via	e-mail:
Access	 the	HTTP	 server	 function	 to	display	 the	web	 browser	 (→	page	45)	 and	 select	 [NETWORK	 SETTINGS]	→ 
[ALERT	MAIL],	and	set	[SENDER’S	 ADDRESS],	 [SMTP	SERVER	 NAME],	and	[RECIPIENT’S	 ADDRESS].	Last,	
click	[SAVE]. 	(→	page	50)
To	execute	[EASY	CONNECTION]	using	Image	Express	Utility	Lite:
The	[EASY	 CONNECTION]	 is	a	mode	 that	can	abbreviate	 the	troublesome	 LAN	settings	 when	using	the	Image	
Express	Utility	Lite	and	connecting	the	PC	and	projector	via	a	wireless	LAN.
The	Image	Express	Utility	Lite	is	contained	on	the	supplied	NEC	Projector	CD-ROM. 	
To	use	 [EASY	 CONNECTION],	 access	the	HTTP	 server	 function	 to	display	 the	web	 browser	 (→	page	45)	 and	 select	
[NETWORK	 SETTINGS]	→	[SETTINGS]	→	[WIRELESS	 LAN]	→	[EASY	 CONNECTION]. 	Next	 select	 [SETTINGS]	
→	[CHANNEL]. 	Last	click	[SAVE].
From	the	projector	menu,	select	[SETUP]	→	[WIRELESS	LAN]	→	[PROFILE]	→	[EASY	CONNECTION]. 	 
						

							109
5. Using On-Screen Menu
❼ Menu Descriptions & Functions [INFO.]
Displays	the	status	 of	the	 current	 signal	and	lamp	 usage. 	This	 item	has	six	pages. 	The	 information	 included	is	as	
follows:
TIP:	Pressing	the	HELP	button	on	the	remote	control	will	show	the	[INFO.]	menu	items.
[USAGE TIME]
[LAMP	LIFE	REMAINING]	(%)*
[LAMP	HOURS	USED]	(H)
[TOTAL	CARBON	SAVINGS]	(kg-CO2)
[TOTAL	COST	SAVINGS]($)
*	 The	progress	indicator	shows	the	percentage	of	remaining	bulb	life.
	 The	 value	informs	 you	of	the	 amount	 of	lamp	 usage. 	When	 the	remaining	 lamp	time	reaches	 0,	the	LAMP	 LIFE	
REMAINING	bar	indicator	changes	from	0%	to	100	Hours	and	starts	counting	down.
	 If	the	remaining	lamp	time	reaches	0	hours,	the	projector	will	not	turn	on.
•	 The	 message	 to	the	 effect	 that	the	lamp	 should	 be	replaced	 will	be	displayed	 for	one	 minute	 when	the	projec-
tor	is	turned	 on	and	 when	 the	POWER	 button	on	the	 projector	 or	the	 STANDBY	 button	on	the	 remote	 control	is	
pressed.
	 To	dismiss	this	message,	press	any	button	on	the	projector	or	the	remote	control.
Lamp	life	(H)Brightness	by	modeOFF AUTO ECO NORMAL ECOOFFAUTO ECO NORMAL ECO
M352WS
3500H3500H	to	6000H5000H
8000H 100%OFF	thru	ECO
Approx.	81%Approx.	60%M332XS
M302WS3500H	to	7000H 5500HApprox.
	76%
•	[TOTAL	CARBON	SAVINGS]
	 This	 displays	 the	estimated	 carbon	saving	information	 in	kg. 	The	 carbon	 footprint	 factor	in	the	 carbon	 saving	cal-
culation	is	based	on	the	OECD	(2008	Edition). 	(→	page	32)