NEC M322w Projector Users Manual

							50
3. Convenient Features
NETWORK SETTINGS
•	SETTINGS
WIRED or WIRELESS
SETTINGSet	for	wired	LAN	or	for	wireless	LAN.
APPLYApply	your	settings	to	wired	LAN	or	wireless	LAN.
DHCP	ONAutomatically	assign	IP	address,	 subnet	mask,	and	gateway	 to	the	 projector	 from	your	
DHCP	server.
DHCP	OFFSet	IP	address,	 subnet	mask,	and	gateway	 to	the	 projector	 assigned	 by	your	 network	
administrator.
IP	ADDRESSSet	your	IP	address	of	the	network	connected	to	the	projector.
SUBNET	MASKSet	your	subnet	mask	number	of	the	network	connected	to	the	projector.
GATEWAYSet	the	default	gateway	of	the	network	connected	to	the	projector.
AUTO	DNS	ONDHCP	 server	will	automatically	 assign	IP	address	 of	DNS	 server	 connected	 to	the	
projector.
AUTO	DNS	OFFSet	your	IP	address	of	DNS	server	connected	to	the	projector.
Setting for WIRED LAN
ENABLETurn	on	wired	LAN	connection
DISABLETurn	off	wired	LAN	connection
Setting	for	 WIRELESS	LAN	(with	the	optional	USB	 Wireless	LAN	Unit	equipped)	
EASY	CONNECTIONExecute	a	wireless	LAN	using	EASY	CONNECTION.
SIMPLE	ACCESS	POINTSet	the	projector	for	simple	access	point.	
CHANNELSelect	a	channel. 	Available	 channels	 vary	depending	 on	the	 country	 and	region. 	When	
you	 select	 [INFRASTRUCTURE],	 make	sure	that	the	projector	 and	your	 access	 point	
are	on	the	 same	 channel; 	when	 you	select	 [AD	HOC],	 make	sure	that	the	projector	 and	
your	computer	are	on	the	same	channel.
PROFILE	1/PROFILE	2Two	settings	 can	be	set	 for	wireless	 LAN	connection. 	Select	 PROFILE	 1	or	 PROFILE	
2.
SSID
Enter	 an	identifier	 (SSID)	for	wireless	 LAN.	Communication	 can	be	done	 only	with	
equipment	whose	SSID	matches	SSID	for	your	wireless	LAN.
SITE	SURVEYDisplays	 a	list	 of	available	 SSIDs	for	wireless	 LAN	on	site. 	Select	 an	SSID	 which	 you	
can access. 
						

							51
3. Convenient Features
NETWORK	TYPESelect	communication	method	when	using	wireless	LAN.
INFRASTRUCTURE: 	Select	 this	option	 when	communicating	 with	one	or	more	 equip-
ment	connected	to	the	wireless	LAN	network	via	a	wireless	access	point.
AD	HOC: 	Select	 this	option	 when	using	the	wireless	 LAN	to	directly	 communicate	 with	
a	computer	in	peer-to-peer	mode. 	
SECURITY	TYPETurn	on	or	off	 the	 encryption	 mode	for	secure	 transmission. 	When	 turn	on	the	 encryp-
tion	mode,	set	 WEP	key	or	encrypted	key.
DISABLE Will	not	turn	 on	the	 encryption	 feature.	Your	 communications	
may	be	monitored	by	someone.
WEP	64	bit Uses	64-bit	datalength	for	secure	transmission.
WEP	128	bit Uses 	128-bit 	datalength 	for 	secure 	transmission. 	This 	option 	will	
increase	 privacy	and	security	 when	compared	 to	use	 of	64-bit	
datalength	encryption.
WPA-PSK	 TKIP/
WPA-PSK	AES/
WPA2-PSK	 TKIP/
WPA2-PSK	AES/ These	
options	 provide	 stronger	 security	
than	 WEP.
NOTE:
•	 The	 WEP	settings	 must	be	the	 same	 as	communication	 devices	such	as	PC	 or	access	 point	in	
your	wireless	network.
•	 When	you	use	WEP,	your	image	transmission	speed	will	slow	down.
•	 [WPA	 PSK-TKIP],	 [WPA	PSK-AES],	 [WPA2	PSK-TKIP]	 and	[WPA2	 PSK-AES]	 are	not	 available	
when	[AD	HOC]	is	selected	from	[NETWORK	TYPE].
INDEXSelect	 encryption	 key	when	 selecting	 [WEP	64	bit]	 or	[WEP	 128	bit]	in	[SECURITY	
TYPE]. 	When	 [WEP	64bit]	or	[WEP	 128bit]	 is	selected	 for	[SECURITY	 TYPE],	the	WEP	
key	is	fixed	to	 “1”	and	cannot	be	changed.
KEYWhen	selecting	[WEP	64	bit]	or	[WEP	128	bit]	in	[SECURITY	 TYPE]:
Enter	WEP	key.
Select Characters	(ASCII) Hexadecimal	digit	(HEX)
WEP	64	bit Up	to	5	characters Up	to	10	characters
WEP	128	bit Up	to	13	characters Up	to	26	characters
When	selecting 	[WPA 	PSK-TKIP], 	[WPA 	PSK-AES], 	[WPA2 	PSK-TKIP] 	or 	[WPA2	
PSK-AES]:
Enter	encryption	key. 	Key	length	must	be	8	or	greater	and	63	or	less. 
						

							52
3. Convenient Features
•	NAME
PROJECTOR	NAMEEnter	a	name	 for	your	 projector	 so	that	 your	 computer	 can	identify	 the	projector. 	A	
projector	name	must	be	16	characters	or	less. 	
TIP:	Projector	name	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
HOST	NAMEEnter	 the	hostname	 of	the	 network	 connected	 to	the	 projector. 	A	 host	 name	 must	be	
15 or less.
DOMAIN	NAMEEnter	 the	domain	 name	of	the	 network	 connected	 to	the	 projector. 	A	 domain	 name	
must be 60 characters or less.
•	ALERT	MAIL
ALERT	MAIL	(English	
only)
This	option	 will	notify	 your	computer	 of	lamp	 replace	 time	or	error	 messages	 via	e-mail	
when	using	wireless	or	wired	LAN. 	
Placing	a	checkmark	will	turn	on	the	Alert	Mail	feature.
Clearing	a	checkmark	will	turn	off	the	Alert	Mail	feature.
Sample	of	a	message	to	be	sent	from	the	projector:
The	lamp	is	at	the	end	of	its	usable	life. 	Please	replace	the	lamp.
Projector	Name:	NEC	Projector
Lamp	Hours	Used: 	100	[H]
SENDER’S	ADDRESSEnter	sender’s	address. 	
SMTP	SERVER	NAMEEnter	the	SMTP	server	name	to	be	connected	to	the	projector.
RECIPIENT’S	ADDRESS	
1,2,3
Enter	your	recipient’s	address. 	Up	to	three	addresses	can	be	entered.
TEST	MAILSend	a	test	mail	to	check	whether	your	settings	are	correct	or	not
NOTE:
•	 If	you	execute	 a	test,	you	may	not	receive	 an	Alert	mail.	Should	this	 happen,	check	if	 network	
settings	are	correct.
•	 If	you	entered	 an	incorrect	 address	in	a	test,	 you	may	 not	receive	 an	Alert	 mail.	 Should	 this	
happen,	check	if	the	Recipient’s	Address	is	correct.
SAVEClick	this	button	to	reflect	the	above	settings.
•	NETWORK	SERVICE
PJLink	PASSWORDSet	a	password	 for	PJLink*. 	A	 password	 must	be	32	characters	 or	less. 	Do	 not	 forget	
your	password. 	However,	if	you	forget	your	password,	consult	with	your	dealer.
HTTP	PASSWORDSet	a	password	for	HTTP	server. 	A	password	must	be	10	characters	or	less.
AMX	BEACONTurn	on 	or 	off 	for 	detection 	from 	AMX 	Device 	Discovery 	when 	connecting 	to 	the 	network	
supported	by	AMX’s	NetLinx	control	system.
TIP:	
When	 using	a	device	 that	supports	 AMX	Device	 Discovery,	 all	AMX	 NetLinx	 control	system	 will	rec-
ognize	the	device	and	download	the	appropriate	Device	Discovery	Module	from	an	AMX	server.
Placing	a	checkmark	will	enable	detecting	the	projector	from	AMX	Device	Discovery.
Clearing	a	checkmark	will	disable	detecting	the	projector	from	AMX	Device 	Discovery.
Image	Express	Utility	LiteClick	“DOWNLOAD” 	to	 display	 the	download	 page	from	which	 the	EXE	 file	of	Image	
Express	 Utility	Lite	can	be	downloaded	 to	your	 USB	 memory	 connected	 to	your	 com-
puter. 	(→	page	62)
SAVE
Click	this	button	to	reflect	the	above	settings.
*	 What	is	PJLink?	 PJLink	 is	a	standardization	 of	protocol	 used	for	controlling	 projectors	of	different	 manufacturers. 	This	 standard	 protocol	is	estab-lished	by	Japan	Business	Machine	and	Information	System	Industries	Association	(JBMIA)	in	2005.	 The	projector	supports	all	the	commands	of	PJLink	Class	1.	 Setting	of	PJLink	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu. 
						

							53
3. Convenient Features
CRESTRON	ROOMVIEW	compatibility
The	projector	 supports	CRESTRON	 ROOMVIEW,	 allowing	multiple	devices	connected	 in	the	 network	 to	be	 managed	
and	controlled	from	a	computer	or	a	controller.
For	more	information,	visit	http://www.crestron.com

Access	to	the	HTTP	server	function,	and	make	necessary	settings	for	[CRESTRON]	in	[NETWORK	SETTINGS].
•	ROOMVIEW	for	managing	from	the	computer.
DISABLEDisables	ROOMVIEW.
ENABLEEnables	ROOMVIEW.
•	CRESTRON	CONTROL	for	managing	from	the	controller.
DISABLEDisables	CRESTRON	CONTROL.
ENABLEEnables	CRESTRON	CONTROL. 	
IP	ADDRESSSet	your	IP	address	of	CRESTRON	SERVER.
IP	IDSet	your	IP	ID	of	CRESTRON	SERVER.
TIP:	The	CRESTRON	settings	are	required	only	for	use	with	CRESTRON	ROOMVIEW.
For	more	information,	visit	http://www.crestron.com
•	INFORMATION
WIRED	LANDisplay	a	list	of	settings	of	wired	LAN	connection.
WIRELESS	LANDisplay	a	list	of	settings	of	wireless	LAN	connection.
UPDATEReflect	settings	when	they	are	changed. 
						

							54
3. Convenient Features
❿ Controlling the Projector over a LAN (PC Control Utility Pro 4/
Pro 5)
Using	 the	utility	 software	 “PC	Control	 Utility	Pro	4”	and	 “PC	 Control	 Utility	Pro	5”	included	 on	the	 companion	 NEC	
Projector	CD-ROM,	the	projector	can	be	controlled	from	a	computer	over	a	LAN.
PC	Control	Utility	Pro	4	is	a	program	compatible	with	 Windows.	(→	this	page)
PC	Control	Utility	Pro	5	is	a	program	compatible	with	Mac	OS. 	(→	page	57)
Control Functions
Power	On/Off,	 signal	selection,	 picture	freeze,	 picture	mute,	audio	mute,	 adjusting,	 error	message	 notification,	 event	
schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	 provides	 an	outline	 of	preparation	 for	use	 of	PC	 Control	 Utility	Pro	4/Pro	 5.	For	 information	 on	how	 to	use	
PC	Control	Utility	Pro	4/Pro	5,	see	Help	of	PC	Control	Utility	Pro	4/Pro	5. 	(→	page	56, 57)
Step	1:	Install	PC	Control	Utility	Pro	4/Pro	5	on	the	computer.
Step	2:	Connect	the	projector	to	a	LAN.
Step	3:	Start	PC	Control	Utility	Pro	4/Pro	5.
•	 To	run	PC	Control	 Utility	Pro	4	on	 Windows	 8	and	 Windows	 XP,	“Microsoft	 .NET	Framework	 Version	2.0”	is	 required. 	
The	Microsoft	 .NET	Framework	 Version	2.0,	3.0	or	3.5	 is	available	 from	Microsoft’s	 web	page. 	Download	 and	install	
the	it	on	your	computer. 	
TIP:
•	 PC	Control	Utility	Pro	4	can	be	used	with	a	serial	connection.
Using on Windows
Step 1: Install PC Control Utility Pro 4 on the computer
NOTE:
•	 To	install	 or	uninstall	 the	program,	 the	Windows	 user	account	 must	have	[Administrator]	 privilege	(Windows	 8,	Windows	 7,	
Windows	Vista	and	Windows	XP)
•	 Exit	all	running	programs	before	installation.	If	another	program	is	running,	the	installation	may	not	be	completed.
1	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
 The menu window will be displayed. 
						

							55
3. Convenient Features
TIP:
If	the	menu	window	will	not	be	displayed,	try	the	following	procedure.
For	Windows	7:
1.	 Click	“start”	on	Windows.
2.	 Click	 “All	Programs” 	→	“Accessories” 	→	“Run”.
3.	 Type 	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	in 	“Name”. 	(example: 	Q:\
LAUNCHER.EXE)
4.	 Click	 “OK”.
 the menu window will be displayed.
2	 Click	 “PC	Control	Utility	Pro	4” 	on	the	menu	window.
 The installation will start.
 When the installation is complete, the Welcome window will be displayed.
3	 Click	 “Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
	 Read	“END	USER	LICENSE	AGREEMENT” 	carefully.
4	 If	you	agree,	click	“I	accept	the	terms	in	the	license	agreement” 	and	then	click	“Next”.
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.
•	 When	the	installation	is	complete,	you	will	return	to	the	menu	window.
TIP:
•	Uninstalling	PC	Control	Utility	Pro	4
To	uninstall	 PC	Control	 Utility	Pro	4,	do	 the	 same	 procedures	 stated	as	in	“Uninstalling	 Virtual	Remote	 Tool”.	Read	“Virtual	 Remote	
Tool”	as	“PC	Control	Utility	Pro	4”	(→	page	41) 
						

							56
3. Convenient Features
Step 2: Connect the projector to a LAN.
Connect	the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	127),	 “Con-
necting	 to	a	Wireless	 LAN	(Optional: 	NP02LM	 series)”	(→	page	128)	 and	 “9.	Controlling	 the	Projector	 by	Using	 an	
HTTP	Browser” 	(→	page	47)
Step 3: Start PC Control Utility Pro 4
Click	“Start” 	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“PC	 Control	 Utility	Pro	4”	→ 
“PC	Control	Utility	Pro	4”.
NOTE:	
•	 For	 the	Schedule	 function	of	the	 PC	Control	 utility	Pro	4	to	 work,	 you	must	 have	your	computer	 running	and	not	in	standby/
sleep	 mode.	 Select	“Power	 Options”	 from	the	“Control	 Panel”	in	Windows	 and	disable	 its	standby/sleep	 mode	before	 running	 the	
scheduler.
[Example]	For	Windows	7:
Select	“Control	 Panel”	→	“System	 and	Security”	→	“Power	 Options”	→	“Change	 when	the	computer	 sleeps”	→	“Put	 the	computer	
to	sleep”	→	“Never”.	
NOTE:	
•	 When	 [NORMAL]	 is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 cannot	be	turned	 on	via	 the	 network	 (wired	LAN/
wireless	LAN)	connection.
TIP:
Viewing	the	Help	of	PC	Control	Utility	Pro	4
•	 Displaying	the	Help	file	of	PC	Control	Utility	Pro	4	while	it	is	running.
	 Click	 “Help	(H)” 	→	“Help	(H)	…” 	of	window	of	PC	Control	Utility	Pro	4	in	this	order.
 The pop-up menu will be displayed.
•	 Displaying	the	help	file	using	the	Start	Menu.
	 Click	 “Start”	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“PC	 Control	 Utility	Pro	4”	→ 
“PC	Control	Utility	Pro	4	Help”.
  The Help screen will be displayed. 
						

							57
3. Convenient Features
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	in	your	Mac	CD-ROM	drive.
	 The	CD-ROM	icon	will	be	displayed	on	the	desktop.
2.	 Double-click	the	CD-ROM	icon.
 The CD-ROM window will be displayed.
3.	 Double-click	the	 “Mac	OS	X”	folder.
4.	 Double-click	 “PC	Control	Utility.mpkg”.
 The installer will start.
5.	 Click	 “Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
6.	 Read	“END	USER	LICENSE	AGREEMENT” 	and	click	“Next”.
 The confirmation window will be displayed
7.	 Click	 “I	accept	the	terms	in	the	license	agreement”.
 Follow the instructions on the installer screens to complete the installation.
Step 2: Connect the projector to a LAN
Connect	 the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	127),	 “Con-
necting	 to	a	Wireless	 LAN	(Optional: 	NP02LM	 series)”	(→	page	128)	 and	 “❾	Controlling	 the	Projector	 by	Using	 an	
HTTP	Browser” 	(→	page	47)
Step 3: Start PC Control Utility Pro 5
1.	 Open	your	Applications	folder	in	Mac	OS.
2.	 Click	the	“PC	Control	Utility	Pro	5” 	folder.
3.	 Click	the	“PC	Control	Utility	Pro	5” 	icon.
 PC Control Utility Pro 5 will start.
NOTE:	
•	 For	 the	Schedule	 function	of	the	 PC	Control	 utility	Pro	5	to	 work,	 you	must	 have	your	computer	 running	and	not	in	sleep	 mode.	
Select	“Energy	Saver”	from	the	“System	Preferences”	in	Mac	and	disable	its	sleep	mode	before	running	the	scheduler.
•	 When	 [NORMAL]	 is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 cannot	be	turned	 on	via	 the	 network	 (wired	LAN/
wireless	LAN)	connection.
	
TIP:
Viewing	the	Help	of	PC	Control	Utility	Pro	5
•	Displaying	the	Help	file	of	PC	Control	Utility	Pro	5	while	it	is	running. 	
•	 From	the	menu	bar,	click	“Help” 	→	“Help” 	in	this	order. 	
 The Help screen will be displayed.
•	Displaying	the	Help	using	the	Dock	
1.	 Open	 “Application	Folder” 	in	Mac	OS.
2.	 Click	the	“PC	Control	Utility	Pro	5” 	folder.
3.	 Click	the	“PC	Control	Utility	Pro	5	Help” 	icon.
 The Help screen will be displayed. 	 
						

							58
3. Convenient Features
⓫ Projecting Your Computer’s Screen Image from the 
Projector over a LAN (Image Express Utility Lite)
 
Using	Image	 Express	 Utility	Lite	contained	 on	the	 supplied	 NEC	Projector	 CD-ROM	 allows	you	to	send	 the	computer’s	
screen	image	and	sound	to	the	projector	over	a	USB	cable	or	a	wired	or	wireless	LAN.
Image	Express	Utility	Lite	is	a	program	compatible	with	 Windows.
Image	Express	Utility	Lite	for	Mac	OS	is	a	program	compatible	with	Mac	OS. 	(→	page	63)
This	section	 will	show	 you	an	outline	 about	how	to	connect	 the	projector	 to	a	LAN	 and	to	use	 Image	 Express	 Utility	
Lite.	For	the	operation	of	Image	Express	Utility	Lite,	see	the	help	of	Image	Express	Utility	Lite.
Step	1: 	install	Image	Express	Utility	Lite	on	the	computer. 	
Step	2:	Connect	the	projector	to	a	LAN.
Step	3:	Start	Image	Express	Utility	Lite.
TIP:
•	 Image	 Express	Utility	Lite	(for	Windows)	 can	be	started	 from	most	 commercially	 available	removable	 media	such	as	USB	 memory	
devices	or	SD	cards	without	the	need	to	install	on	your	computer.	(→	page	61)
What You can Do with Image Express Utility Lite
•	Image	transmission	(for	 Windows	and	Mac	OS)
•	 The	screen	of	your	 computer	 can	be	sent	 to	the	 projector	 via	a	wired	 or	wireless	 network	without	a	computer	 cable	
(VGA).
•	 By	using	“EASY	 CONNECTION” 	function,	 the	complicated	 network	settings	can	be	simplified	 and	the	computer	
will	automatically	connect	to	the	projector.
•	 The	screen	of	your	computer	can	be	sent	to	up	to	four	projectors	at	the	same	time.
•	Audio	transfer	capability	(for	 Windows	only)
•	 Image	Express	Utility	Lite	allows	 you	to	send	 the	computer’s	 screen	image	and	audio	 to	the	 projector	 over	wired/
wireless	LAN	or	USB	connection.
•	 Audio	 transfer	capability	 is	available	 only	when	 the	computer	 connects	with	the	projector	 in	peer-to-peer	 net-
work.
•	USB	Display	(for	 Windows	only)
•	 Computer’s	screen	image	and	audio	 can	be	projected	 via	a	USB	 cable,	 without	 connecting	 a	computer	 cable	
(VGA).
•	 Just	connecting	 the	computer	 and	the	projector	 over	a	USB	 cable	 will	make	 the	USB	 Display	 function	 available	
(Plug	&	Play)	even	without	installing	Image	Express	Utility	Lite	on	the	computer. 	(→	page	45)
•	Geometric	Correction	Tool	[GCT]	(for	Windows	only)
See	“⓬	Projecting	an	Image	from	an	Angle	(Geometric	Correction	 Tool	in	Image	Express	Utility	Lite)”. 
						

							59
3. Convenient Features
Using on Windows
Step 1: install Image Express Utility Lite on the computer. 
NOTE:
•	 To	install	 or	uninstall	 the	program,	 the	Windows	 user	account	 must	have	“Administrator”	 privilege	(Windows	 8,	Windows	 7,	
Windows	Vista	and	Windows	XP).	
•	 Exit	all	running	programs	before	installation.	If	another	program	is	running,	the	installation	may	not	be	completed.	
•	 Image	Express	Utility	Lite	will	be	installed	to	the	system	drive	of	your	computer.
	 If	the	message	 “There	is	not	 enough	 free	space	 on	destination”	 is	displayed,	 free	up	enough	 space	(about	 100	MB)	 to	install	 the	
program.
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
 The menu window will be displayed.
TIP:
If	the	menu	window	will	not	be	displayed,	try	the	following	procedure.
For	Windows	7:
1.	Click	 “start” 	on	Windows.
2.	Click	 “All	Programs” 	→	“Accessories” 	→	“Run”.
3.	 Type 	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	 	in 	“Name”. 	(example: 	Q:\
LAUNCHER.EXE)
4.	 Click	 “OK”.
 The menu window will be displayed.
2.	 Click	 “Installing	Image	Express	Utility	Lite” 	on	the	menu	window.
 The installation will start.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.	
	 Read	“END	USER	LICENSE	AGREEMENT” 	carefully	
3.	 If	you	agree,	click	“I	agree.” 	and	then	click	 “Next”.	
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation. 	
•	 When	the	installation	is	complete,	you	will	return	to	the	menu	window.
 When the installation is complete, a completion message will be displayed.
4.	 Click	 “OK”.
 This completes the installation.
TIP:
•	Uninstalling	Image	Express	Utility	Lite
To	uninstall	 Image	Express	 Utility	Lite,	do	the	 same	 procedures	 stated	as	in	“Uninstalling	 Virtual	Remote	 Tool”.	Read	“Virtual	 Remote	
Tool”	as	“Image	Express	Utility	Lite”	(→	page	41)
Step 2: Connect the projector to a LAN.
Connect	 the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	127),	 “Con-
necting	 to	a	Wireless	 LAN	(Optional: 	NP02LM	 series)”	(→	page	128)	 and	 “9.	Controlling	 the	Projector	 by	Using	 an	
HTTP	Browser” 	(→	page	47)