NEC M322w Projector Users Manual
Have a look at the manual NEC M322w Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 126
115
5. Using On-Screen Menu
❽ Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE],...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-125.png "Page 126
115
5. Using On-Screen Menu
❽ Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE],...")
![Page 128
117
6. Installation and Connections
[M402W/M362W/M322W]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 30" (0.76 m) measured diagonally when the projector is roughly 41 inches (1.0 m) from the wall or
screen. The largest the image can be is 300" (7.6 m) when the projector is about 423 inches (10.7 m) from the wall
or screen.
300
Distance
(Unit: m/inch)
Screen Size
Screen Size (Unit:...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-127.png "Page 128
117
6. Installation and Connections
[M402W/M362W/M322W]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 30\" (0.76 m) measured diagonally when the projector is roughly 41 inches (1.0 m) from the wall or
screen. The largest the image can be is 300\" (7.6 m) when the projector is about 423 inches (10.7 m) from the wall
or screen.
300
Distance
(Unit: m/inch)
Screen Size
Screen Size (Unit:...")
![Page 129
118
6. Installation and Connections
[M352WS/M302WS]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-
proximately 60" (1.52 m) measured diagonally when the projector is roughly 22 inches (0.6 m) from the wall or screen.
The largest the image can be is 150" (3.8 m) when the projector is about 58 inches (1.5 m) from the wall or screen.
150
120
Distance
(Unit: m/inch)
Lens center Screen Size...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-128.png "Page 129
118
6. Installation and Connections
[M352WS/M302WS]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-
proximately 60\" (1.52 m) measured diagonally when the projector is roughly 22 inches (0.6 m) from the wall or screen.
The largest the image can be is 150\" (3.8 m) when the projector is about 58 inches (1.5 m) from the wall or screen.
150
120
Distance
(Unit: m/inch)
Lens center Screen Size...")
![Page 134
123
6. Installation and Connections
Connecting an External Monitor
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer
analog image you’re projecting.
NOTE:
• Daisy chain connection is not possible.
• When audio equipment is connected, the projector speaker is disabled.
Monitor out and sleep mode:
• The MONITOR OUT (COMP.) connector will not work when [NORMAL] is selected for [STANDBY MODE].
The MONITOR OUT (COMP.) connector will...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-133.png "Page 134
123
6. Installation and Connections
Connecting an External Monitor
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer
analog image you’re projecting.
NOTE:
• Daisy chain connection is not possible.
• When audio equipment is connected, the projector speaker is disabled.
Monitor out and sleep mode:
• The MONITOR OUT (COMP.) connector will not work when [NORMAL] is selected for [STANDBY MODE].
The MONITOR OUT (COMP.) connector will...")
120 6. Installation and Connections WARNING * Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. * Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 41°F (5°C) and 104°F (40°C) (Eco mode selected automatically at 95°F to 104°F/35°C to 40°C). • Do not expose the projector to moisture, dust, or smoke. This will harm the screen image. • Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on the side or the front of the projector. Reflecting the Image Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is required. Contact your NEC dealer if you need a mirror system. If you’re using a mirror system and your image is inverted, use the MENU and ▲▼◀▶ buttons on your projector cabinet or your remote control to correct the orienta- tion. (→ page 99)
121 6. Installation and Connections HDMI 2 IN HDMI 1 IN COMPUTER IN USB-B AUDIO IN Computer cable (VGA) (supplied)To mini D-Sub 15-pin connector on the projector. It is recommend- ed that you use a commercially available distribution amplifier if connecting a signal cable longer than the cable supplied. NOTE: For Mac, use a commercially available pin adapter (not sup- plied) to connect to your Mac’s video port. A commercially available USB cable (compatible with USB 2.0 specifications) Stereo mini-plug audio cable (not supplied) ❷ Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. * If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power manage- ment software. Enabling the computer’s external display Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. Connecting Your Computer NOTE: Signals supported by Plug & Play (DDC2) INPUT COMPUTER IN HDMI 1 INHDMI 2 IN analog digitaldigital Yes YesYes HDMI cable (not supplied)Use High Speed HDMI® Cable.
122 6. Installation and Connections • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER IN COMPUTER(COMP1) HDMI 1 IN HDMI1HDMI1 HDMI 2 IN HDMI2HDMI2 USB-B USB-B(USB-B) NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
123 6. Installation and Connections Connecting an External Monitor You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. NOTE: • Daisy chain connection is not possible. • When audio equipment is connected, the projector speaker is disabled. Monitor out and sleep mode: • The MONITOR OUT (COMP.) connector will not work when [NORMAL] is selected for [STANDBY MODE]. The MONITOR OUT (COMP.) connector will work only in the sleep mode. Applying a signal from the COMPUTER IN connector will put the projector in the sleep mode, which allows you to use the MONITOR OUT(COMP.) connector and the AUDIO OUT mini jack. Sound from the MIC input jack will be output to the AUDIO OUT mini jack. The sleep mode is one of the standby modes. The sleep mode cannot be selected from the menu. • In the network standby mode, sound for the last viewed computer or video source will be heard. BNC-to- D-SUB converted signal will not be output in the standby mode and sleep mode. MONITOR OUT(COMP.) AUDIO OUT AUDIO IN COMPUTER IN Computer cable (VGA) (supplied) Stereo mini-plug audio cable (not supplied) Computer cable (VGA) (not supplied)
124 6. Installation and Connections Connecting Your DVD Player or Other AV Equipment Connecting Video Input • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control VIDEO IN VIDEO(VIDEO) NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video inputs. NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements. NOTE: An image may not be displayed correctly when a Video source is played back in fast-forward or fast-rewind via a scan converter. VIDEO IN AUDIO IN Audio cable (not supplied)Video cable (not supplied) Audio equipment Audio cable (not supplied)
125 6. Installation and Connections Connecting Component Input • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER IN COMPUTER(COMP1) NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements. COMPUTER IN AUDIO IN Audio cable (not supplied) 15-pin - to - RCA (fe- male) × 3 cable adapter (ADP-CV1E) Stereo mini plug - to - RCA audio cable (not supplied) Component video RCA × 3 cable (not supplied) DVD player Audio Equipment
126 6. Installation and Connections HDMI 2 IN HDMI 1 IN Connecting HDMI Input You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN connector of your projector. NOTE: The HDMI IN connector supports Plug & Play (DDC2B). Audio cable (not supplied) HDMI cable (not supplied)Use High Speed HDMI® Cable. Input connectorSOURCE button on the projector cabinetButton on the remote control HDMI 1 IN HDMI1HDMI1 HDMI 2 IN HDMI2HDMI2 TIP: For users of audio video equipment with an HDMI connector: Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”. This will provide improved image contrast and more detailed dark areas. For more information on settings, refer to the instruction manual of the audio video equipment to be connected. • When connecting the HDMI IN connector of the projector to the DVD player, the projector’s video level can be made settings in accordance with the DVD player’s video level. In the menu select [HDMI SETTINGS] → [VIDEO LEVEL] and make necessary settings. • If the HDMI input sound cannot be heard, in the menu select [HDMI SETTINGS] → [AUDIO SELECT] → [HDMI1] or [HDMI2]. Audio Equipment
127 6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [WIRED LAN]. (→ page 108). Example of LAN connection Example of wired LAN connectionServer Hub LAN cable (not supplied) NOTE: Use a Category 5 or higher LAN cable.
128 6. Installation and Connections Connecting to a Wireless LAN (Optional: NP02LM series) The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are required to assign an IP address to the projector. Important: • If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove the USB Wireless LAN Unit from the projector. • Buy the appropriate USB Wireless LAN Unit for your country or area. NOTE: • When the projector is turned on with the optional wireless LAN unit inserted, the indicator will light up blue and the green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is working. • Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n) standard. Flow of Setting Wireless LAN Step 1: Attach the USB Wireless LAN Unit to the projector. Step 2: Connect the computer to the projector via wired LAN. (→ page 127) Use the computer’s browser to display the projector’s HTTP server. (→ page 47) Step 3: Use an HTTP server to set the wireless LAN. (→ page 50) Access the HTTP server function to set [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS] → [EASY CONNECTION], [SIMPLE ACCESS POINT], [PROFILE1] or [PROFILE2]. NOTE: • To use the HTTP server function, the projector must be connected to a network. First use the wired LAN to connect the projector to a network and then use the HTTP server to set the wireless LAN. • After setting the wireless LAN by using the HTTP server, set [NETWORK SETTINGS] → [SETTINGS] → [WIRED] → [DISABLE] When switching to set on the projector after connecting to the wireless LAN: Use the menu to set the wireless LAN connection for the projector. (→ page 109) Select [DISABLE], [EASY CONNECTION] , [PROFILE1] or [PROFILE2] you set from the HTTP server. Attaching the USB Wireless LAN Unit NOTE: • The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted in the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB port may break. • Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge the static electricity from your body. • Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector malfunction or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect the power cord, and then connect it again. • Do not insert other USB devices into the USB Wireless LAN unit port. Do not insert the USB Wireless LAN unit into the USB-B port (Type B).
129 6. Installation and Connections Prepare a Phillips screw driver beforehand. 1. Press the POWER button to turn off the projector and set it into standby condition, and disconnect the power cord. 2. Remove the USB (LAN) port cover. Loosen the screw securing the port cover. • The screw is not removable. 3. Slowly insert the USB Wireless LAN Unit into the USB (LAN) port. Remove the cap from the USB Wireless LAN Unit, and then insert it with the surface (side of indicator) facing outward. Keep the cap for later use. NOTE: Do not force to insert the USB Wireless LAN Unit. 4. Put the USB (LAN) port cover back into place. Insert the catch of the USB (LAN) port cover into the groove of the projector cabinet, and then tighten the screw to secure the port cover. To remove the USB Wireless LAN Unit, disconnect the power cord and use the above procedure. NOTE: • The green LED on the USB Wireless LAN Unit flashes to show that Wireless LAN Unit is working. If the USB Wireless LAN Unit is incorrectly attached, the blue LED will not flash. • Do not press the button on the USB Wireless LAN Unit. The button will not work with this model.