NEC M322w Projector Users Manual
Have a look at the manual NEC M322w Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 7
v
Important Information
Note for US Residents
The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws.
Lamp Replacement
• Use the specified lamp for safety and performance.
• To replace the lamp, follow all instructions provided on page 132.
• Be sure to replace the lamp when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE.
PLEASE REPLACE THE LAMP.]
appears. If you continue to use the lamp after the lamp has reached the end of...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-6.png "Page 7
v
Important Information
Note for US Residents
The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws.
Lamp Replacement
• Use the specified lamp for safety and performance.
• To replace the lamp, follow all instructions provided on page 132.
• Be sure to replace the lamp when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE.
PLEASE REPLACE THE LAMP.]
appears. If you continue to use the lamp after the lamp has reached the end of...")
![Page 8
vi
Important Information
Power management function
The projector has power management functions. To reduce power consumption, the power management functions (1
and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable
connection, use the on-screen menu to change the settings for 1 and 2.
1. STANDBY MODE (Factory preset: NORMAL)
To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE]....](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-7.png "Page 8
vi
Important Information
Power management function
The projector has power management functions. To reduce power consumption, the power management functions (1
and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable
connection, use the on-screen menu to change the settings for 1 and 2.
1. STANDBY MODE (Factory preset: NORMAL)
To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE]....")
![Page 9
vii
Table of Contents
Important Information ........................................................................\
....................i
1. Introduction ........................................................................\
...................................1
❶
What’s in the Box? ........................................................................\
..................................1
❷
Introduction to the Projector ........................................................................\...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-8.png "Page 9
vii
Table of Contents
Important Information ........................................................................\
....................i
1. Introduction ........................................................................\
...................................1
❶
What’s in the Box? ........................................................................\
..................................1
❷
Introduction to the Projector ........................................................................\...")
![Page 10
viii
Table of Contents
❹ Changing Eco Mode/Checking Energy-Saving Effect .................................................33
Using Eco Mode [ECO MODE] ........................................................................\
.......33
Checking Energy-Saving Effect [CARBON METER] ..............................................34
❺
Preventing the Unauthorized Use of the Projector [SECURITY] .......................................3 5
❻ Using the Computer Cable (VGA) to Operate the Projector (Virtual...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-9.png "Page 10
viii
Table of Contents
❹ Changing Eco Mode/Checking Energy-Saving Effect .................................................33
Using Eco Mode [ECO MODE] ........................................................................\
.......33
Checking Energy-Saving Effect [CARBON METER] ..............................................34
❺
Preventing the Unauthorized Use of the Projector [SECURITY] .......................................3 5
❻ Using the Computer Cable (VGA) to Operate the Projector (Virtual...")
![Page 11
ix
Table of Contents
Setting up the Projector for a Wireless LAN Connection (with the optional USB
Wireless LAN Unit equipped) [WIRLESS LAN] .....................................................109
❼
Menu Descriptions & Functions [INFO.] .....................................................................111
[USAGE TIME] ........................................................................\
..............................111
[SOURCE(1)]...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-10.png "Page 11
ix
Table of Contents
Setting up the Projector for a Wireless LAN Connection (with the optional USB
Wireless LAN Unit equipped) [WIRLESS LAN] .....................................................109
❼
Menu Descriptions & Functions [INFO.] .....................................................................111
[USAGE TIME] ........................................................................\
..............................111
[SOURCE(1)]...")
![Page 12
1
Projector
[M402W/M362W/M322W/M402X/M362X/M322X/M282X]Power Cable
(US: 7N080236/7N080242)
(EU: 7N080022/7N080028) Soft case (24BS8391)
The M352WS/M302WS/M332XS do
not come with a soft case.
[M352WS/M302WS/M332XS]
Power cord
(US: 7N080240/7N080243)
(EU: 7N080027/7N080029)
Computer cable (VGA)(7N520089) Remote control
(7N901051)Batteries (AAA × 2)
For North America only
Limited warranty
For customers in Europe:
You will find our current valid Guarantee
Policy on our Web Site:...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-11.png "Page 12
1
Projector
[M402W/M362W/M322W/M402X/M362X/M322X/M282X]Power Cable
(US: 7N080236/7N080242)
(EU: 7N080022/7N080028) Soft case (24BS8391)
The M352WS/M302WS/M332XS do
not come with a soft case.
[M352WS/M302WS/M332XS]
Power cord
(US: 7N080240/7N080243)
(EU: 7N080027/7N080029)
Computer cable (VGA)(7N520089) Remote control
(7N901051)Batteries (AAA × 2)
For North America only
Limited warranty
For customers in Europe:
You will find our current valid Guarantee
Policy on our Web Site:...")
![Page 16
5
1. Introduction
❸ Part Names of the Projector
Front/Top
[M402W/M362W/M322W/M402X/M362X/M322X/M282X]
Controls(→ page 8)
Remote Sensor(→ page 11)Exhaust Vent
Heated air is exhausted from here. Port Cover for Optional USB
Wireless LAN Unit
When using the optional USB
Wireless LAN Unit, first remove
the cover. (
→ page 129)
Zoom Lever (→ page 22)
Lens CoverFocus Ring
(→ page 23)
Adjustable Tilt Foot Lever
(→ page 21)
Adjustable Tilt Foot
(→ page 21) Lens Light Sensor
(→ page 95)
Security chain...](http://img.usermanuals.tech/thumb/54/91905/w64_nec-m322w-manual_d-15.png "Page 16
5
1. Introduction
❸ Part Names of the Projector
Front/Top
[M402W/M362W/M322W/M402X/M362X/M322X/M282X]
Controls(→ page 8)
Remote Sensor(→ page 11)Exhaust Vent
Heated air is exhausted from here. Port Cover for Optional USB
Wireless LAN Unit
When using the optional USB
Wireless LAN Unit, first remove
the cover. (
→ page 129)
Zoom Lever (→ page 22)
Lens CoverFocus Ring
(→ page 23)
Adjustable Tilt Foot Lever
(→ page 21)
Adjustable Tilt Foot
(→ page 21) Lens Light Sensor
(→ page 95)
Security chain...")
ix Table of Contents Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless LAN Unit equipped) [WIRLESS LAN] .....................................................109 ❼ Menu Descriptions & Functions [INFO.] .....................................................................111 [USAGE TIME] ........................................................................\ ..............................111 [SOURCE(1)] ........................................................................\ ................................112 [SOURCE(2)] ........................................................................\ ................................112 [WIRED LAN] ........................................................................\ ................................112 [WIRELESS LAN] ........................................................................\ .........................113 [VERSION(1)] ........................................................................\ ...............................113 [VERSION(2)] ........................................................................\ ...............................113 [OTHERS] ........................................................................\ .....................................114 ❽ Menu Descriptions & Functions [RESET] ...................................................................115 Returning to Factory Default [RESET] ..................................................................115 6. Installation and Connections ..................................................................116 ❶ Setting Up the Screen and the Projector ....................................................................116 Selecting a Location........................................................................\ ...................... 116 Throw Distance and Screen Size ........................................................................\ ..119 ❷ Making Connections ........................................................................\ ...........................121 Connecting Your Computer ........................................................................\ ...........121 Connecting an External Monitor ........................................................................\ ...123 Connecting Your DVD Player or Other AV Equipment ...........................................124 Connecting Component Input ........................................................................\ .......125 Connecting HDMI Input........................................................................\ ................. 126 Connecting to a Wired LAN ........................................................................\ ..........127 Connecting to a Wireless LAN (Optional: NP02LM series) ...................................128 7. Maintenance ........................................................................\ .............................131 ❶ Cleaning the Lens........................................................................\ ............................... 131 ❷ Cleaning the Cabinet ........................................................................\ ..........................131 ❸ Replacing the Lamp........................................................................\ ............................ 132 8. Appendix ........................................................................\ ......................................135 ❶ Troubleshooting ........................................................................\ ..................................135 Indicator Messages ........................................................................\ .......................135 Common Problems & Solutions ........................................................................\ ....136 If there is no picture, or the picture is not displayed correctly. ...............................137 ❷ Specifications ........................................................................\ .....................................138 ❸ Cabinet Dimensions ........................................................................\ ...........................142 Attaching the Optional Cable Cover (NP05CV) ....................................................144 ❹ Pin Assignments of D-Sub COMPUTER Input Connector .........................................145 ❺ Compatible Input Signal List ........................................................................\ ...............146 ❻ PC Control Codes and Cable Connection ..................................................................147 ❼ Troubleshooting Check List ........................................................................\ .................148 ❽ TCO Certification ........................................................................\ ................................150 ❾ REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico) ........................................................................\ .........................................151
1 Projector [M402W/M362W/M322W/M402X/M362X/M322X/M282X]Power Cable (US: 7N080236/7N080242) (EU: 7N080022/7N080028) Soft case (24BS8391) The M352WS/M302WS/M332XS do not come with a soft case. [M352WS/M302WS/M332XS] Power cord (US: 7N080240/7N080243) (EU: 7N080027/7N080029) Computer cable (VGA)(7N520089) Remote control (7N901051)Batteries (AAA × 2) For North America only Limited warranty For customers in Europe: You will find our current valid Guarantee Policy on our Web Site: www.nec-display-solutions.com • Important Infomation (For North America: 7N8N4362) (For Other countries than North America: 7N8N4362 and 7N8N4372)• Quick Setup Guide (7N8N4382)/(7N8N4392) NEC Projector CD-ROM User’s manual (PDF) and the utility software (7N952002) 1. Introduction ❶ What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. Unless otherwise described in the user’s manual, the drawings for the projector cabinet show examples of the M402W.
2 1. Introduction ❷ Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This projector is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches (150 inches for short throw models) across (measured diagonally) from your PC or Mac computer (desktop or notebook), VCR, DVD player, or document camera. You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen, and the projector can be permanently mounted on a ceiling*1. The remote control can be used wirelessly. *1 Do not attempt to mount the projector on a ceiling yourself. The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury. In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. Please consult your dealer for more information. Features you’ll enjoy: • 0.2 W (100-130 V AC)/0.38 W (200-240 V AC) in standby condition with energy saving technology Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode. NORMAL: 0.20W(100-130V AC)/0.38W(200-240V AC) NETWORK STANDBY: 2.5W(100-130V AC)/2.9W(200-240V AC) • Carbon Meter This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE] is set to [AUTO ECO], [NORMAL], or [ECO]. The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off and in the INFO of the on-screen menu. • Lamp life up to 8000 hours Using in Eco Mode allows you to prolong the projector’s lamp life up to 8000 hours (up to 3500 hours in ECO MODE OFF). M282X: up to 10000 up hours (up to 4500 hours in ECO MODE OFF). • No filter replacement required Since the projector has no filters, filter replacement is not required. • Two HDMI input ports provide digital signal The two HDMI inputs provide HDCP compatible digital signals. The HDMI input also supports audio signal. • 20 W built-in speaker for an integrated audio solution /mic input supprted Powerful 20 watt monaural speaker provides volume need for large rooms a dynamic or condenser mic can be used. • The supplied remote control allows you to assign a CONTROL ID to the projector Multiple projectors can be operated separately and independently with the same single remote control by assigning an ID number to each projector. • Auto vertical keystone correction Auto Keystone feature allows the projector to detect its tilt and correct vertical distortion automatically. • USB Display Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the projector allows you to send your computer screen image to the projector without the need of a traditional computer cable (VGA).
3 1. Introduction • Integrated RJ-45 connector for wired networking capability along with wireless networking capabilities An RJ-45 connector is standard. An optional USB Wireless LAN Unit is required for wireless LAN connection. • Software programs (User Supportware) contained in the supplied CD-ROM The supplied NEC Projector includes three programs: Virtual Remote Tool, Image Express Utility Lite (for Windows/ Mac OS), PC Control Utility Pro 4 (for Windows)/5 (for Mac OS). Image Express Utility Lite (for Windows) can be started from a commercially available USB memory or SD card without the need of installing on your computer. • Audio transfer capability (for Windows only) Image Express Utility Lite allows you to send the computer’s screen image and audio to the projector over a network or USB connection. * Audio transfer capability is available only when the computer connects with the projector in peer-to-peer net- work. • AUTO POWER ON and AUTO POWER OFF features The DIRECT POWER ON, AUTO POWER ON(COMP.), AUTO POWER OFF, and OFF TIMER features eliminate the need to always use the POWER button on the remote control or projector cabinet. • AUTO POWER OFF Function The projector is preset at the factory so that it will automatically turn off if there is no signal present after a preset duration. If you do not need this preset function, cancel it from the OSD menu. See page 104 for more informa- tion. • Preventing unauthorized use of the projector Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security chain opening to help prevent unauthorized access, adjustments and theft deterrence. • High resolution up to WUXGA High resolution display - up to WUXGA compatible, XGA (M402X/M362X/M322X/M282X/M332XS)/WXGA (M402W/ M362W/M322W/M352WS/M302WS) native resolution. • 3D Images supported The projector provides 3D images to a user wearing commercially available 3D eyeglasses. • CRESTRON ROOMVIEW compatibility The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be man- aged and controlled from a computer or controller. About this user’s manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it.
4 1. Introduction Comparative Table of Main Features The main features vary depending on the model as follows. Standard Models with Wide Panel Standard ModelsShort-Throw Models with Wide Panel Short- Throw Model M402W M362W M322W M402XM362XM322XM282XM352WS M302WS M332XS Native Aspect Ratio 16:10 Wide 4:3 Standard 16:10 Wide 4:3 Standard Native Resolution (dots × lines* 1) WXGA (1280 × 800) XGA (1024 × 768)WXGA (1280 × 800)XGA (1024 × 768) Screen Size 30" - 300" 60" - 150" Projection Distance 29–531 inches/0.75–13.5 m 35–627 inches/0.89–15.9 m22–58 inches/0.57–1.5 m 27–70 inches/ 0.68–1.8 m Light output *2 *3 in OFF for ECO MODE 4000 lumens 3600 lumens 3200 lumens 4000 lumens 3600 lumens 3200 lumens 2800 lumens 3500 lumens 3000 lumens 3300 lumens Lamp Replace- ment Time (average) OFF for ECO MODE/ON for ECO MODE (H) 3500/8000 4500/100003500/8000 3500/80003500/8000 Lamp Model NP30LP NP29LPNP28LPNP30LPNP29LPNP28LPNP27LPNP30LPNP28LPNP30LP Lamp Wattage (AC) 270 W 250 W225 W270 W250 W225 W200 W270 W225 W270 W Zoom Using the manual zoom lever Using the [DIGITAL ZOOM] func- tion from the menu Focus Using the manual focus ring Using the manual focus lever For further details on the specifications, see pages 138 to 140. *1 Effective pixels are more than 99.99%.*2 This is the light output value (lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode is selected as the [PRESET] mode, the light output value may drop slightly.*3 Compliance with ISO21118-2005 TIP: The model name is located on the cabinet.
5 1. Introduction ❸ Part Names of the Projector Front/Top [M402W/M362W/M322W/M402X/M362X/M322X/M282X] Controls(→ page 8) Remote Sensor(→ page 11)Exhaust Vent Heated air is exhausted from here. Port Cover for Optional USB Wireless LAN Unit When using the optional USB Wireless LAN Unit, first remove the cover. ( → page 129) Zoom Lever (→ page 22) Lens CoverFocus Ring (→ page 23) Adjustable Tilt Foot Lever (→ page 21) Adjustable Tilt Foot (→ page 21) Lens Light Sensor (→ page 95) Security chain opening Attach an anti-theft device. The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter. Opening and closing the lens cover Slide the lens cover to the right to uncover the lens. To cover the lens, slide the lens cover to the left. NOTE: • The lens cover works in conjunction with the AV-MUTE function. Closing the lens cover will turn off the image and sound during normal projector operation; opening it will restore the image and sound. With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about 2 hours, it will turn off automatically. • Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause damage to the lens cover sliding mechanism!
6 1. Introduction AC InputConnect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet. (→ page 16) Built-in Security Slot ( )* Terminal Panel (→ page 9) Connection for cable cover (Left) Screw holes (→ page 144) Connection for cable cover (Right) Screw holes (→ page 144) Lamp Cover (→ page 132) Rear Feet (→ page 21) Intake Vent(→ page 131) Rear [M402W/M362W/M322W/M402X/M362X/M322X/M282X] Monaural Speaker (20 W) * This security slot supports the MicroSaver ® Security System.
7 1. Introduction Focus Lever(→ page 23) Front/Top [M352WS/M302WS/M332XS] Remote Sensor(→ page 11)Exhaust Vent Heated air is exhausted from here. Lens Cap Adjustable Tilt Foot Lever (→ page 21) Adjustable Tilt Foot (→ page 21) Lens Security chain opening Attach an anti-theft device. The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter. Controls(→ page 8) Port Cover for Optional USB Wireless LAN Unit When using the optional USB Wireless LAN Unit, first remove the cover. (→ page 129) Light Sensor(→ page 95) AC InputConnect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet. (→ page 16) Built-in Security Slot ( )* Terminal Panel (→ page 9) Lamp Cover (→ page 132) Rear Feet (→ page 21) Intake Vent(→ page 131) Rear [M352WS/M302WS/M332XS] Monaural Speaker (20 W) * This security slot supports the MicroSaver ® Security System. Connection for cable cover (Left) Screw holes (→ page 144) Connection for cable cover (Right) Screw holes (→ page 144)
8 1. Introduction Top Features M402W/M362W/M322W/M402X/ M362X/M322X/M282XM352WS/M302WS/M332XS 1, 2 89 1112 5 61 0 3 471389 1112 5 61 0713 1. (POWER) Button ( → page 17, 29) 2. POWER Indicator ( → page 16, 17, 29, 135) 3. STATUS Indicator ( → page 135) 4. LAMP Indicator (→ page 132, 135) 5. ECO Button (→ page 33) 6. SOURCE Button (→ page 19) 7. AUTO ADJ. Button (→ page 28) 8. MENU Button (→ page 80) [M352WS/M302WS/M332XS] 9. ▲▼◀▶ / Volume Buttons ◀▶ / Keystone Buttons ▲▼ ( → page 24, 28, 80) [M402W/M362W/M322W/M402X/M362X/M322X/M282X] 9. ▲▼◀▶ / Volume Buttons ◀▶ / Keystone Button ▼ ( ) ( → page 24, 28, 80) 10. ENTER Button (→ page 80) 11. EXIT Button (→ page 80) 12. Wireless LAN Indicator () When the projector is turned on with the optional wire- less LAN unit inserted, the indicator will light up blue. (→ page 128) 13. ECO Indicator When [ECO MODE] is set to the other options than [OFF], this indicator will light up green. (→ page 33) NOTE: • All the buttons except ▲▼◀▶ will light when pressed. The light will turn off if no button operation is made for 90 seconds.
9 1. Introduction Terminal Panel Features 1 24 6 14 13 7 98 1211 1035 1. COMPUTER IN/ Component Input Connector (Mini D-Sub 15 Pin) ( → page 121, 123, 125) 2. COMPUTER AUDIO IN Mini Jack (Stereo Mini) (→ page 121, 123, 125) 3. HDMI 1 IN Connector (Type A) (→ page 121, 126) 4. HDMI 2 IN Connector (Type A) (→ page 121, 126) 5. USB-B Port (Type B) (→ page 44, 45) 6. MONITOR OUT (COMP.) Connector (Mini D-Sub 15 Pin) (→ page 123) 7. AUDIO OUT Mini Jack (Stereo Mini) (→ page 123) 8. VIDEO IN Connector (RCA) (→ page 124) 9. VIDEO AUDIO IN L/MONO, R (RCA) (→ page 124) 10. MIC Input Jack (Monaural Mini) (→ page 71) 11. LAN Port (RJ-45) (→ page 127) 12. USB-A Port (Type A) (→ page 74) 13. 3D SYNC (Mini DIN 4 Pin) (→ page 67) 14. PC CONTROL [PC CONTROL] Port (D-Sub 9 Pin) (→ page 146) Use this port to connect a PC or control system. This enables you to control the projector using serial commu- nication protocol. If you are writing your own program, typical PC control codes are on page 146.