NEC Location Status Installation Guide

NDA-30043   Revision 2.0Page 7
Location Status Information - Installation Guide Database Requirements
Chapter 3 Database Requirements
Location Status Information requires two databases (i.e., extensions and 
messages).   These databases are created through the Database Administration 
option on the APM System Administration Menu.  Database creation involves the 
following four-step process for
 each of the two required databases:
1.Define Master Database Fields:  This step involves creating the master...

Page 8NDA-30043   Revision 2.0
Database Requirements Location Status Information - Installation Guide
Extension Database Information
This database contains the extensions that can access Location Status 
Information.  For each, the name of the person associated with it and the person’s 
identifying access code is given.  Name the master file  Lsi_extn and the 
application file lsi_extn
.
Field DefinitionsExtension Key–The extension number followed by 0 for the first employee 
assigned to the extension,...

NDA-30043   Revision 2.0Page 9
Location Status Information - Installation Guide Database Requirements
Field Definitions 
(Cont.)Minute–The two-digit number for the minute.  Initially, if there is no 
message, this is 99.
Phone to Call–This field should be left blank.
Active Flag–This should be set to 0.
Employee Identification Database Information
This database contains the messages that can be selected for display on the Dterm 
LCD.  Name the master file Lsi_msg and the application file lsi_msg....

Database Requirements Location Status Information - Installation Guide
Page 10NDA-30043   Revision 2.0
This Page Left Blank. 

NDA-30043   Revision 2.0Page 11
Location Status Information - Installation Guide Control Options
Chapter 4 Control Options
If AMS_to_LSI is running with AMS on a NEAX2400, it should be configured to 
run nightly as follows:
1. Choose Control Options from the System Administration menu.
2. Choose Applications from the Control Options menu.
3. Choose AMS_to_LSI from the Application Selection menu.
4. Choose Initialize from the Application Control Options menu.
This will build a new master extension file....

Control Options Location Status Information - Installation Guide
Page 12NDA-30043   Revision 2.0
This Page Left Blank. 

NDA-30043   Revision 2.0Page 13
Location Status Information - Installation Guide NEAX Command Assignments
Chapter 5 NEAX Command Assignments
This guide assumes that data settings that affect the operation of all OAI software 
on a system-wide basis have already been assigned on the NEAX2400 
Maintenance Administration Terminal (MAT) commands, the NEAX2000 
Customer Administration Terminal (CAT), or the NEAX2000 Maintenance 
Operations Console (MOC).   Such settings include, for instance, system index...

Page 14NDA-30043   Revision 2.0
NEAX Command Assignments Location Status Information - Installation Guide
NEAX2400 Commands
Use the NEAX2400 Maintenance Administration Terminal (MAT) to enter these 
commands.
A knowledge of the D
term stations in the NEAX system and which ones will have 
access to Location Status Information is necessary to using the following 
commands:
AOKC  Command:   
(Assignment of 
OAI  Key Codes)This command is used to associate the MSF facility and its Op-Code that was...

NDA-30043   Revision 2.0Page 15
Location Status Information - Installation Guide NEAX Command Assignments
(c) Enter to the Dterm function key field the MAT Function Key Index that 
corresponds to the previously assigned OAI Key Code. 
Figure 5-2   OAI Function Key Assignment Example
ExampleThe example above indicates that MSF #129 is configured for Location Status 
Information and is assigned through the AOKC command to OAI Key Code 10.  
OAI Key Code 10 corresponds in the PBX to MAT Function Key Index...

Page 16NDA-30043   Revision 2.0
NEAX Command Assignments Location Status Information - Installation Guide
NEAX2000 Commands
Use the NEAX2000 Customer Administration Terminal (CAT), or the NEAX2000 
Maintenance Operations Console (MOC) to enter these commands. (Refer to the 
NEAX2000 System Manuals for more information.)
A knowledge of the D
term stations in the NEAX system and which ones will have 
access to Location Status Information is necessary to using the following 
commands:
CMD79:  
(Assignment...