NEC LCD8205, LCD8205-P Owners Guide

English-19
English
Sound Mode
User This function use setting Equalizer value.
Standard  Selection of preset Sound mode (Equalizer).
Music
Movie
Speech
Volume Adjust the sound volume level.
Balance Tuning the sound balance between left and right.
Equalizer
10 KHz The value of 5 Band equalizer are preset.
3 KHz These values are changed by user with user mode setting.
1 KHz
300 Hz
100 Hz
AV C
On /Off Automatic volume level control
MTSStereo (L+R) MTS feature is selecting one (L or R) or both (L+R) channel...

English-20
Advanced
Dimming
Auto Dimming Enable/Disalbe Auto Dimming control by Abient  Light sensor.
Dim Level Display current Dim Level.
MAX Dim Ambient Adjusts detected light ambient to set the maximun dimming.
MIN Dim Ambient Adjusts detected light ambient to set the minimun dimming.
Ambient Display current detected light ambient level by Lux unit.
Heat Control
Fan Control Controls fan driving option by temperature sensor / force on/ force off.
Fan Active Adjusts fan driving temperature by celsius...

English-21
English
Controlling the LCD monitor via RS-232C Remote Control
This LCD monitor can be controlled by connecting a personal computer wit\
h a RS-232C terminal.
Functions that can be controlled by a personal computer are:
• Power ON or OFF
• Switching between input signals
Connection
LCD Monitor + PC
NOTE:If your PC (IBM or IBM compatible) is equipped only with a 25-pin seri\
al port connector, a 25-pin serial port adapter is
required. Contact your dealer for details.
* In order to function,...

English-22
Features
Color Control Systems: Allows you to adjust the colors on your screen and customize the color a\
ccuracy of your monitor to
a variety of standards.
OSD (On-Screen-Display) Controls:  Allow you to quickly and easily adjust all elements of your screen image\
 via simple to
use on-screen menus.
Plug and Play:  The Microsoft
® solution with the Windows® operating system facilitates setup and installation by allowing the
monitor to send its  capabilities (such as screen size and...

English-23
English
Troubleshooting
No picture
• The signal cable should be completely connected to thedisplay card/computer.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON position.
• Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to
change graphics mode.)
• Check the monitor and your display card with respect to compatibility...

English-24
Specifications
Product Specifications
LCD Module 81.6"/207 cm diagonalPixel Pitch: 0.744 mm
Resolution: 1920 x 1080 dots Color: Over 16 million colors (depending on video card used)
Brightness: 600 cd/m
2 (Typ.) (LCD8205)/450 cd/m2 (Typ.) (LCD8205-P)
Contrast Ratio: 2000:1 Viewing Angle: 89° (typ) @ CR>10 (LCD8205)/85° (typ) @ CR>10 (LCD8205-P)
Design View Distance: 1500 mm
Frequency Horizontal: 15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input) 31.5 kHz - 91.1 kHz (Digital Input)...

English-25
English
Pin Assignment
1) S-VIDEO input: VIDEO
Pin No Name
1GND
2GND
3 Y (Luminance)
4 C (Chroma)
2) Digital/Analog RGB input: DVI-I
3) RS-232C input
Pin No Name
1 connected to 7&8
2 RXD
3 TXD
4 connected to 6
5GND
6 connected to 4
7 connected to 1&8
8 connected to 1&7
9NC
Pin - Assignment of DVI connector:
1 TX2- 9 TX1- 17 TX0-
2 TX2+ 10 TX1+ 18 TX0+
3 Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19 Shield (TX0 / TX5)
4 NC 12NC 20NC
5 NC 13NC 21NC
6 DDC-Serial Clock 14 +5V power 22 Shield (TXC)...

English-26
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees re\
cycling as one of the company’s
top priorities in trying to minimize the burden placed on the environmen\
t. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the \
latest independent standards from agencies such as
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of...