NEC LCD8205, LCD8205-P Owners Guide

English-9
English
NOTE: The button without explanation doesn’t work.
1 POWER button
Switches the power on/off.
2 SOURCE button
Enter Input Source OSD menu, [DVI], [PC], [HDMI], [AV1],
[AV2], [S-Video] and [Component].
3 MUTE button
Turns on/off mute function.
4 INFO button
Turns on/off the information OSD.
5 STILL button
Toggles picture status between motion and still image.
6 DUAL I II button
Select MTS.
7 ARC button
Select picture size, [4:3], [16:9], [1:1] for DVI/PC, [16:9],
[Panorama], [Zoom1],...

English-10
1. Determine the installation location
CAUTION:Installing your LCD display must be done by a
qualified technician. Contact your dealer for
more information.
CAUTION: IN ORDER TO AID IN MOUNTING, A LIFTING
DEVICE MUST BE USED IN CONJUNCTION
WITH THE ATTACHABLE EYEBOLTS.
MOVING OR INSTALLING THE LCD MONITOR
MUST BE DONE BY FOUR OR MORE
PEOPLE. Failure to follow this caution may
result in injury if the LCD monitor falls.
CAUTION: Do not mount or operate the display upside
down, face up, or face...

English-11
English
5. Switch on the power of all the attachedexternal equipment
When connected with a computer, switch on the power of
the computer first.
6. Operate the attached externalequipment
Display the signal from the desired input source.
7. Adjust the sound
Make volume adjustments when required.
8. Adjust the screen (See page 18)
Make adjustments of the screen display position when
necessary.
9. Adjust the image (See page 18)
Make adjustments such as brightness or contrast when
required.
10....

English-12
Connections
Before making connections:
* First turn off the power of all the attached equipment and make connections.
* Refer to the user manual included with each separate piece of equipment.\
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to display \
your computer’s screen image.
Some video cards and a pixel clock over 162MHz may not display an image \
correctly.
Your LCD monitor displays proper image by adjusting the factory preset ti\
ming...

English-13
English
Connect the LCD Monitor to a DVD Player
• To connect the Component connector (RCA) on the LCD monitor, use an RCA connector cable (sold separately).
Connecting a DVD Player with component out
Connecting your DVD player to your LCD monitor will enable you to displa\
y DVD video.
Refer to your DVD player user’s manual for more information.
LCD monitor
RCA
To DVD Component video output
RCA
To audio right output
To audio left output 

English-14
Connecting to a Stereo Amplifier
You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner’s manual for more information.
LCD monitor
Amplifier
External speaker External speaker
Connecting a DVD Player with HDMI out
Connecting your DVD player to your LCD monitor will enable you to displa\
y DVD video.
Refer to your DVD player user’s manual for more information.
LCD monitor
HDMI connector
To HDMI output
Connect the LCD Monitor to a DVD Player
• Please use an HDMI...

English-15
English
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on and wil\
l turn red while powered off.
Power Button 

English-16
Power Indicator
Mode
Power ON
Power OFF (Standby)*
Power consumption under 1W
Power Save
Power consumption under 15W
Not connected
Using Power Management
The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fixed period.
The power management feature on your new display has
been set to the “ON”...

English-17
English
OSD (On-Screen-Display) Controls
Press MENU button
to show OSD menu.Press UP and DOWN
to select the main
menu.Press Right button to
enter the sub menu.
Press EXIT to exit
menu.
Remote Control
Press MENU button
to show OSD menu. Press CH+ and CH-
buttons to select the
main menu.Press VOL+ button to
enter the sub menu.
Press MENU button
to back to previous
menu.
Control Panel
Main Menu Icons Main Menu Item
Key Guide
NOTE:Some functions may not be available depending on the model or...

English-18
OSD Setting
Picture Picture Mode
User Store last value at User setting.
Dynamic Selection of the picture appearance.
Standard
Movie
Mild
User
Brightness Adjust the brightness.
Contrast Adjust the Contrast.
Color (AV1/AV2/S-Video/Component)Adjust the Color.
Tint (AV1/AV2/S-Video/Component)Adjust the Tint.
Sharpness Adjust the Sharpness.
Phase (Component)Adjust the Phase
Color Temp
User (PC, DVI, HDMI)This Function is for user setting of color Temp.
Cool 2 This Function is for selection of...