NEC Infoset 408 System Manual

Issue 1AInfoSet 408
7 - 48PC Programming   

 	
	
Navigational Buttons
When the feature is selected from the feature list, the first programming
screen is displayed.  The programming screens have four navigational
buttons.    
Figure 7-35  Wizard Feature Programming Screen
Displays the previous programming screen.  If this is the first 
screen in the programming sequence, pressing this button has 
no affect.
Displays the next programming screen.  If this is the last screen 
in the...

InfoSet 408Issue 1A
System Manual7 - 49 Page Number/Page Count
When the programming screens are displayed, the system indicates the
page number which is currently being displayed and the page count (e.g.,
1 of 2).  This lets the user know how many programming functions are
used to program the selected feature.
Programming Function Number and Name
The programming function number and associated name are displayed
under the page number and page count.
Programming Values
Programming fields for the selected...

System ManualA - 1
Feature Access Codes and 
Special Numbers Lists
 
This section provides a list of the feature access code and the special numbers
that are used when programming and operating the system.  
Feature Access
Codes
 are codes that are entered to access certain features of the system.
Before using feature access codes, the user must press  
   before and after
entering the code.  
Special Internal Dials Numbers are numbers or codes that are
entered to access certain functions of...

Issue 1AInfoSet 408
A - 2 Feature Access Codes and Special Numbers Lists
Room Monitoring Telephone Set/Cancel
	All Telephone Alarm Clear
This feature is only available for telephones assigned to ports 1 and 2.
Door Lock Release

Internal Hunt
Internal Do Not Disturb Set/Cancel
Call Forward – All Calls Cancel
Call Forward – All Calls Set/Cancel
XX = Extension Numbers 10~59
Call Forward – Busy/No Answer Cancel
Call Forward – Busy/No Answer Set/Cancel
XX = Extension Numbers 10~59
...

InfoSet 408Issue 1A
System ManualA - 3
	Extension Name Entry (Internal Calls)
XX = Extension Numbers 10~59
	Trunk Name Entry (External Call)
X = Outside Line (1~4)
		Callback Indication Reset
Date/Time Set

Test Printing (SMDR)
This feature is only available for telephones assigned to ports 1 and 2.
Background Music Telephone Set/Cancel
SMDR Printout Start/Stop Toggle (Stop = PC Programming  Mode)
This feature is only available for telephones assigned to ports 1 and 2.
Feature LED...

Issue 1AInfoSet 408
A - 4 Feature Access Codes and Special Numbers Lists 
 
Table A-2  Feature Access Codes List for Single Line Telephones
Access 
CodeDescription
	
Speed Dialing
	Redialing
	Registering/Deleting Speed Dial Numbers
Table A-3  Special Internal Dial Numbers List
Access 
CodeDescription

Call Pickup from a different Tenant Group

Call Pickup Internal/External from the same Tenant Group
Specified CO/PBX Line Seizure
X = Outside Lines 1~4
Do Not Disturb Set/Cancel
Call...

InfoSet 408Issue 1A
System ManualA - 5
Page Answer
External Paging
Internal/External All Call Page
 Call Pickup (ISDN lines)
	
Doorphone 1 Monitor 
	Doorphone 2 Monitor 
	
Ringer/Volume Adjustment
	Contrast Adjustment
This applies to Electra Elite telephones only.
Auto Answer Assignment – Dial 9

Valid Telephone Extension Numbers
Table A-3  Special Internal Dial Numbers List
Access 
CodeDescription 

Syst em M anu al  B - 1
ON
ON
ON
ON
ON
. 375  se c.
ON 

Issue 1AInfoSet 408
B - 2Tone Patterns
CO/PBX Ring
Tone DHigh:
1024 Hz/1285 Hz (I)
1100 Hz/1400 Hz (E)
Low:
480 Hz/606 Hz (I)
520 Hz/660 Hz (E)16
Doorphone
1Chime 
ToneN/A N/A
Busy 
Chime 
Tone1400 Hz/1100 Hz 
(I & E)N/A
Doorphone
2Chime 
ToneN/A N/A
Busy 
Chime 
Tone1024 Hz (I)
1100 Hz (E)N/A
Hold Alarm1024 Hz (I)
1100 Hz (E)N/A
Howler Tone2400 Hz 
(I & E)16 100% 
AM
Incoming Dial Tone360 Hz/440 Hz 
(I & E)N/A
Incoming Ring 
Tr a ns f er480 Hz/606 Hz (I)
520 Hz/660 Hz (E)16
Internal Ring Tone500 Hz (I)...

InfoSet 408Issue 1A
System ManualB - 3
Key Tone 1100 Hz (I & E) N/A
Recall Tone 1024 Hz (I & E) N/A
Reorder Tone 480/620 Hz N/A
Ringback Tone for 
External Speaker 
CO/PBX Ring Tone440 Hz/480 Hz
(I & E)N/A
Ringing Transfer 
Alarm1024 Hz (I)
11 0 0  H z  ( E )N/A
Set Tone 1800 Hz
(I & E)N/A
Set Tone 2500 Hz (I)
540 (E)N/A
Timed Alarm1024 Hz (I)
11 0 0  H z  ( E )N/A
Tone Override500 Hz (I)
540 HZ (E)N/A
Trunk Queuing500 Hz (I)
540 HZ (E)N/A
System Tone
(Fixed)Frequency (Hz)
(Fixed)Modulation Cycle
ON...