NEC Ht1000 Entertainment Projector Users Manual

E-37
ASPECT
When screen size 4:3 is selected for the source, the following selections will display.
Normal
Zoom
Cinema
V-Zoom
modeinput
480i/576iDVD progressive 480p/576p 720p 1080i 1080p PC(RGB)
These are the same signals.
Normal
Full
Zoom
Stadium
modeinput
480i/576iDVD progressive 480p/576p 720p 1080i 1080p PC(RGB)
These are the same signals. When screen size 16:9 is selected for the source, the following selections will display. 

E-38
Masking Unwanted Area (Blanking)
This feature allows you to mask any unwanted area of the screen
image.
Adjust the Top, Bottom, Left or Right blanking with the SELECT  or
 button.
Adjusting Position and Clock
This allows you to manually adjust the image horizontally and verti-
cally, and adjust Clock and Phase.
Horizontal/Vertical Position:
Adjusts the image location horizontally and vertically using the SE-
LECT  and  buttons. This adjustment is made automatically when
the Auto Adjust is turned...

E-39
User Adjust (when using User 1 to 4)
The SweetVision feature provides improvement of contrast using a pro-
prietary detail enhancement technology.
NOTE: This feature is not available for 480p, 576p, HDTV and RGB signals.
Off ............... Turns off the Sweet Vision feature
Low .............. Selects low level
Medium ....... Selects medium level
High ............. Selects high level
Split Mode
This feature turns on or off to show the effect of the SweetVision.
3D Y/C  Separation
This option turns...

E-40
Projector Options
Using 3D Reform
This feature corrects trapezoidal distortion so that the projected im-
age is rectangular.
Two options are available for correcting procedures.
You can save adjustment settings by using the 3D Reform Save op-
tion on Setup (See page E-42).
Keystone
1. Press the SELECT  button to adjust the horizontal keystone.
2. Press the SELECT 

 button to select Vertical.
3. Press the SELECT 
 button to adjust the vertical keystone.
4. After completing, press the ENTER...

E-41
Setup
Enables you to set operating options.
Press OK to save your changes for all the features of Page1, Page2,
Page3, Page 4 and Page 5.
[Page 1]
Setting Lamp Mode to Normal or Eco [Lamp Mode]:
This feature enables you to select two brightness mode of the lamp:
Normal and Eco modes. The lamp life can be extended up to 2000
hours by using the Eco mode.
Normal Mode . This is the default setting (100% Brightness).
Eco Mode ......Select this mode to increase the lamp life (80% Bright-
ness).
Selecting...

E-42
Enabling Power Management [Power Management]:
When this option is on and there is no input for five minutes or more,
the projector will automatically turn itself off.
Enabling Power Off Confirmation [Power Off Confirmation]:
This option determines whether a confirmation dialog for turning off
the projector will appear or not.
Enabling Horizontal and Vertical Keystone Correction Save
[3D Reform Save]:
This option enables you to save your current 3D Reform settings.
Saving your change once affects all...

E-43
An IP address can be automatically assigned to this projector by your
DHCP server. If your network does not automatically assign IP address,
ask your network administrator for an address, and then register it manu-
ally.
Automatic ....... Automatically assigns an IP address to the projector
from a DHCP server.
Manual ........... Provides a space for you to register the IP address or
subnet mask number obtained from your network ad-
ministrator.
IP Address ..... Set your IP address. Press 
 to...

E-44
Mail
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-mail
when using wired LAN. The error message will be notified when the
projector lamp has reached the end of its usable life or an error oc-
curs in the projector.
Sample of a message sent from the projector:
The lamp is at the end of its usable life. Please replace the lamp.
Projector Name: X X X X
Lamp Hour Meter: xxxx [H]
Projector Usage: xxxxxx [H]
Senders Address:
Specify...

E-45
Enable/Disable .............. This turns the Security function on or off.
Keyword ........................Enter an appropriate keyword when you use
the Security function.
(Up to 10 characters can be used.)
The Security function is available only when
your keyword is entered.
Use Protect key ............ Check this box to lock your projector when
using a PC card. To use a keyword without
a PC card, do not check this box.
Read ............................. Reads data of a PC card.
Register...

E-46
To set up a keyword to enable the Security function without using
a registered PC card.
1.Use the SELECT 
 button to select “Keyword” and use the soft-
ware keyboard to enter a keyword.
NOTE: Please make a note of your keyword.
2.Use the SELECT 

 button to select “Enable” and use the SELECT
 button to select “OK”, then the Security function will be enabled.
An “Are you sure?” message will appear. Use the SELECT  but-
ton and press the ENTER button.
The Security function takes effect.
To...