NEC Gt6000 Lcd Projector Users Manual

8-12
Ref. Adjust
Using 3D Reform
This feature corrects trapezoidal distortion so that the projected
image is rectangular.
Two options are available for correcting procedures.
You can save adjustment settings by using the 3D Reform Save
option on Setup (See page 8-16).
Cornerstone
See page 3-4.
* When "Resolution" is set to "Native", "Cornerstone" and "Key-
stone" are not available.
Keystone
1. Press the SELECT  or  button to adjust the horizontal keystone.
2. Press the...

8-13
Reference Lens Memory [Ref. Lens Memmory]
This function serves to store the adjusted value common to all
input sources when using the Shift, Focus, and Zoom buttons of
the main unit or the remote control.
Set Reference Point ............. Stores the current adjusted val-
ues in memory as a reference.
Use Reference Point ............Applies the adjusted values
stored in Set Reference Point to
the current signal.
Return to Factory Default ..... Returns the adjusted values to
the factory default...

8-14
Selecting Menu Display Time
This option allows you to select how long the projector waits
after the last touch of a button to turn off the menu.
The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec",
and "Auto 45 sec". The "Auto 45 sec" is the factory preset.
Manual ........ The menu can be turned off manually.
Auto 5 sec ... The menu will automatically be turned off in 5
seconds if no buttons are pressed within 5 sec-
onds.
Auto 15 sec . The menu will...

8-15
Setup
[Page 1]
Selecting Projector Orientation [Orientation]
This reorients your image for your type of projection. The op-
tions are: desktop front projection, ceiling rear projection, desk-
top rear projection, and ceiling front projection.
Selecting a Color or Logo for Background [Background]
Use this feature to display a blue/ black screen or logo when
no signal is available. The default background is "Blue". You
can change the logo screen using the PC Card Files feature.
See pages 4-4....

8-16
Selecting Operation Mode [Operation Mode Select]
Set the operation mode of the USB mouse connected to the
USB port (MOUSE/HUB) on the projector
Auto ............. Depending on connection of the USB port (PC)
on the projector and a USB port (type A) on your
PC, the USB mouse is operated in the following
way:
* When connecting the projector to your PC
The USB mouse connected to the projector
can be used as a PC mouse.
* When not connecting the projector to your PC
The USB mouse connected to the...

8-17
Enabling Last Memory [Last Memory]
The projector stores the last signal data in memory for each
input (RGB1, RGB2, DVI DIGITAL, Video, S-Video and Slot 1/
2).
This feature will reduce switching time between sources. If a
commercially available switcher is connected, turning on this
feature may cause the image to appear incorrectly.
Should this happen, turn this feature off to mute the screen
during switching.
Enabling Idle Mode [Idle Mode]
The projector has two standby modes: Standby and Idle....

8-18
Disabling the Cabinet Buttons [Control Panel Key Lock]
This option turns on or off the Control Panel Key Lock function.
NOTE:
* This Control Panel Key Lock does not affect the remote control functions.
* When the cabinet buttons are disabled, pressing and holding the CANCEL button
for about 10 seconds will change the setting to enable.
Lamp Settings
The projector is designed to accept two lamps (dual lamp sys-
tem). This dual lamp system provides prolonged lamp life or high
brightness or extra lamp...

8-19
Status
Displaying Current Status of Link Mode
When selecting the tab "Status", you will get the following dia-
log box.
Master ID ................. Indicates the Master projector
Status ...................... Indicates the status of the master pro-
jector
Connected PJ ..........Indicates number of connected slave
projectors
Slave  No .................. Indicates serial number of the slave pro-
jector
ID ............................. Indicates ID of a slave projector
Status...

8-20
Advanced
IP Address
An IP address can be automatically assigned to this projector
by your DHCP server. If your network does not automatically
assign IP address, ask your network administrator for an ad-
dress, and then register it manually.
Automatic .... Automatically assigns an IP address to the pro-
jector from a DHCP server.
Manual ........ Provides a space for you to register the IP ad-
dress or subnet mask number obtained from your
network administrator.
IP Address ... Set your IP address....

8-21
WEP (for Wireless only)
Select this option whether using the WEP (Wired Equivalent Pri-
vacy) key for encryption or not. To use encryption, specify WEP
key.
Disable ........ Will not turn on the encryption feature. Your com-
munications may be monitored by someone.
64bit ............ Uses 64-bit datalength for secure transmission.
128bit .......... Uses 128-bit datalength for secure transmission.
This option will increase privacy and security
when compared to use of 64bit datalength en-
cryption....