NEC Gt6000 Lcd Projector Users Manual

8-22
Mail
NOTE: To the Mail Alert feature on wireless LAN connection, select "Infrastructure"for "Mode" in "Network Type." .
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-
mail when using wireless or wired LAN. The error message
will be noticed when the projector lamp has reached the end
of its usable life or an error occurs in the projector.
Sample of a message sent from the projector:
The lamp is at the end...

8-23
8. Using On-Screen Menu
Seamless Switch (GT6000 only)
1. What Does This Function Do?
This function provides a transition effect during source switch-
ing.
[Before switching]
[During switching][After switching]
* The drawings show an example of how “Effect-Wipe Right”
works.
• On/Off
Turns on or off the Seamless Switch function.
The default setting is “Off ”.
• Effect
Selects one of the six effects during source switching.
The default setting is “None”. 2. Setting the Seamless Switch function.
2-1....

8-24
8. Using On-Screen Menu
Setting a Password
A password can be set for your projector to avoid operation by
an unauthorized person.
There are two password options: one for menu and the other for
logo.
When a password is set, doing any one of the following four op-
erations will display the Password input screen.
For Menu:
* Changing the menu to Advanced
* Editing the custom menu
For Logo:* Changing the background
* Changing the logo data in PC Card Files
Procedures for Password setting apply to both...

8-25
Enable/Disable ........ This turns the Security function on or off.
Keyword .................. Enter an appropriate keyword when you
use the Security function.
(Up to 10 characters can be used.)
The Security function is available only
when your keyword is entered.
Use Protect key .......Check this box to lock your projector
when using a PC card. To use a key-
word without a PC card, do not check
this box.
Drive ........................ Switches between PC Card slots.
Read ...........................

8-26
(3) When you attempt to display an image for which security is set
while the security function is enabled
• Blanks (spaces) cannot be used in the Keyword section.
To delete PC card data you registered.
1. Use the SELECT 
button to select "Delete" and use the SELECT button to select the list window.
2. Use the SELECT 

button to select the PC card data you wish to
delete.
3. Press the SELECT 
button to select "Delete" and press the ENTER
button.
The PC card data will be deleted....

8-27
8. Using On-Screen Menu
3. Select “Edit” and press the ENTER button to open the Edit window.
4. Set the Day, Time (24 hours format), On-Time and Off-Time using the
SELECT buttons and the Software keyboard (1 thru 10).
5. Select On Timer or Off Timer
6. Repeat the Timer
To repeat the On Timer or Off Timer program every week, place a check
mark in “Repeat”.
7. Select “OK” and press the ENTER button on the remote control to com-
plete the setting. To cancel this and return to its previous screen,...

8-28
8. Using On-Screen Menu
Enabling Sleep Timer
1. Select your desired time between 30 minutes and 16 hours: Off, 0:30,
1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Select “Set” and press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set "Off" for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is turned...

8-29
8. Using On-Screen Menu
Type
Standard lamp
Extended life lampNormal
2000HEco
3000HModel
GT60LP
GT60LPS 4500HLamp life (H) Page 2
Signal Type, Video Type, Sync Type, Interlace, Direct Key
Projector Information
Displays the information for your projector such as lamp usage,
filter usage, version number and others. This dialog box has three
pages.
Page 1
Remaining Lamp 1 Time, Remaining Lamp 2 Time, Lamp 1 Hour
Meter, Lamp 2 Hour Meter
NOTE: The progress indicator shows the percentage of remaining bulb...

9
Maintenance
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
z Replacing the Lamp .................................................. 9-2
x Replacing or Cleaning the Filter ............................... 9-3
c Cleaning the Cabinet and the Lens .......................... 9-4 

9-2
This chapter describes the simple maintenance procedures you
should follow to replace the lamp and the filter, and to clean the
filter and the cabinet.
z Replacing the Lamp
The projector has two lamps. The lamp replacement procedure
applies to both lamps. After your lamp 1 and 2 has been operat-
ing for 2000 hours (Normal mode on the standard life lamp) or
longer, the "Lamp" indicator in the cabinet will blink red and the
message will appear. Even though the lamp may still be working,
replace...