NEC Gt6000 Lcd Projector Users Manual

3-6
The confirmation screen is displayed.
On the Cornerstone adjustment screen, select
“Exit” and then “OK”, or press the CANCEL but-
ton on the remote control. 8. Use the SELECT 

button to select another icon which points in
the direction.
Screen
9. Press the SELECT 
orbutton to highlight the [OK] and press the
ENTER button.
This completes the keystone correction.
Selecting “Cancel” will return to the adjustment screen without saving
changes (Step 3).
Selecting "Reset" will return to the...

3-7
m Turning off the Projector
To turn off the projector:
First press the POWER (ON/STAND BY) button on the projector cabinet
or the POWER OFF button on the remote control for a minimum of two
seconds. The POWER indicator will glow orange. After the projector turns
off, the cooling fans keep operating for 90 seconds (2 minutes in the op-
tional extended life lamp GT60LPS) (Cooling-off time).
Second, turn off the Main Power switch. The power indicator will go out.
Last unplug the power cable.
NOTE: You...

4
Convenient Features
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
zTurning Off the Image and Sound ............................. 4-2
x Enlarging and Moving a Picture ................................ 4-2
c Getting the On-line Help and Information ................. 4-2
v Using a USB Mouse ................................................. 4-3
b Using a USB HUB Function ...................................... 4-3
n Changing Background Logo ..................................... 4-4
m Making Freehand Drawings on
a...

4-2
z Turning Off the Image and Sound
Press the MUTE PICTURE button to turn off the image and sound for a
short period of time. Press again to restore the image and sound.
x Enlarging and Moving a Picture
You can enlarge the area you want up to 400 percent.
To do so:
Press the MAGNIFY button.
Enlarge the selected area.
When the MAGNIFY (+) button is pressed, the image is magnified. To
move the magnified image, use the SELECT button.
cGetting the On-line Help and Information
You get the contents about...

4-3
v Using the USB Mouse
Using a commercially available USB mouse gives you smooth operation.
NOTE: There may be some brands of USB mouse that the projector does not sup-port.
Operate the Projector Menus using the USB mouse
Mouse CursorWhen connecting a USB mouse to the projector, you get a
mouse cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse
cursor disappears.
Menu DisplayClicking with a mouse button displays the menu.
Clicking displays the pull-down menu. To close...

4-4
n Changing Background Logo
You can change the default background logo using the PC Card Files
feature.
NOTE: File size must be 256KB or less. File formats other than JPEG and BMP arenot available.
1. From the menu, select [Tools] 
→[PC Card Files] to display a list of all
the files stored in the PC card so that you can select a file you want to
use as a background logo.
2. The Logo button allows you to select a background logo from graphic
files on a PC card and change to it as the background logo....

4-5
This function serves to store the adjusted value when using the Shift, Focus, and
Zoom buttons of the projector or the remote control.
Reference memory:
Reference  Point ....... Adjusted settings are stored in memory as a reference com-
mon to all the input sources. If no setting is stored in Cus-
tom Point, the adjusted settings in Reference Point will be
applied.
Custom memory:
Custom Point ........... Adjusted settings are stored in memory for each input sig-
nal.
Usage Example
When you wish to...

5-1
5
Using the Viewer
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
z Making the Most out of the Viewer Function ............. 5-2
x Operating the Viewer Function from the Projector
(playback) ................................................................. 5-3 

5-2
P
C
C
O
N
T
R
O
L
I
N
I
N O
U
T
O
S
C
 
T
R
I
G
G
E
RR
E
M
O
T
E
2 R
E
M
O
T
E
1 L
A
N
U
S
B(MOUSE/HUB)U
S
B(P
C)P
C
C
A
R
D2
1
NOTE:
• To use the Viewer, first you need to create presentation materials on your PC
using the Dynamic Image Utility 2.0 contained on the supplied NEC Projector
User Supportware CD-ROM. For installation, see “6- 
bSoftware Installation”.
For creating presentation materials, see the Slide show function on the on-line
manual of the Dynamic Image Utility 2.0.
• Selecting...

5-3
xOperating the Viewer Function from the
Projector (playback)
This section describes the operation for showing slides of pre-
sentation documents created using the Viewer function with the
projector. It is also possible to make slides directly from the im-
ages projected with the projector.
Projecting slides (Viewer)
1. Insert a PC card into the PC card slot.
Insert the PC card so that the end with the insertion direction arrow on
the top goes in first.
* Press the eject button to eject the card.
2....