NEC Electra 16/48 Executive Station Users Guide

							l Depress ON/OFF button, 
l Depress ICM button, 
l Dial “56”. 
l Depress busy outside line button, 
@Verify at display “TRUNK QUEUE SET” if 
accepted. 
l Depress ON/OFF button. OR 
l Depress feature button programmed for . 
Trunk Queuing. 
NOTE: Station must be in DSS mode. (SPD LED unlit). 
NOTE:Your phone will be tone signalled when a line is available. Depress the outside line button, and dial telephone number. 
SETTING: 
l Depress ON/OFF button, 
l Depress ICM button, 
l Dial “46”. 
l Dial station number calls should be 
forwarded to, OR 
l Call Forwarding-All Calls is set. 
l Dial “2” for calls to be forwarded only 
when your station is busy. 
l Receive confirmation tone, 
l Depress ON/OFF button, NOTE:The HOLD LED will be lit steadily when call forwarding is set, 
VERIFYING: 
l Depress ON/OFF button. 
l Depress ICM button. 
l Dial “47”. 
l Read target number in display, CANCELLING: 
0 Depress ON/OFF button, 
l Depress ICM button, 
l Dial “46”. 
l Depress ON/OFF button. NOTE: HOLD LED goes out. 
l Depress feature button programmed for 
Call Forwarding. 
NOTE: Station must be in DSS mode. (SPD LED unlit).  
						

							l Lift handset. 
[Depress ON/OFF button if equipped with 
Speakerphone). 
l Depress ICM button. 
l Dial internal zone access code (51,52,53 
OR 
or 50). l Depress Feature Button programmed 
*Voice page. for internal page. 
NOTE: Station must be in DSS mode. (SPD LED unlit). 
ANSWERING AN INTERNAL PAGE 
l Lift handset at any station, 
l Depress ICM button. 
l Dial “55”. 
l Lift handset. 
[Depress ON/OFF button if equipped with 
Speakerphone). 
l Depress ICM button. 
l Dial external zone access code (61,62, 
63 or 60). 
l Voice page. 
ANSWERING AN EXTERNAL PAGE 
l Lift handset at any station. 
0 Depress ICM button. 
l Dial “65”. OR 
l Depress Feature Button programmed 
for external page, 
NOTE: Station must be in DSS mode. (SPD LED unlit]. 
.:.: --. ..,- .- QUEUING/ 
FORWARDING/ 
PAGING  
						

							Account code entry applies only to those systems equipped with Station Message Detail 
Service (SMDS). 
l Dial “*” and account code (up to nine digits) otJy after completing one of the following: 
l Immediately following dialing of telephone number, 
(To enter Account Code dial manually, or access speed dial (system/station). 
OR . 
l During conversation, after alerting outside party, 
OR 
l Prior to disconnection of outside line. 
l Lift handset. 
l Depress ICM button. 
l Dial “2” to pick up calls to a station in the OR l Dial “3” to pick up calls when in night 
same pickup group. 
mode. 
l Lift handset or depress ON/OFF button, 
l Depress idle outside line button. 
l Dial “W. 
l When party answers, use handset to talk. (Handset not required when equipped with 
Speakerphone).  
						

							SETTING: 
l Depress DND button; LED lights steady. 
CANCELLING: 
l Depress DND button; LED goes out. 
*A “CB 0” display indicates that the attendant has a Message Waiting for the station user. 
l Lift handset. (Depress ON/OFF button if equipped with Speakerphone). 
l Dial “0” for attendant; converse. 
OTHER 
FEATURES 
,: 
; 
. :- -- .. ._ : ‘_. .-..- _. ._ ___.-,__- . -.: