NEC Dtl8r1 Manual

Issue 1.0
Owner’s Manual7-7
Contact Numbers
If adding a new contact, enter the number you wish to assign to the contact.  
If you are editing an existing contact, change the number used to dial the 
contact.
A contact number is a maximum of 24 digits.  If the number is over 16 
digits, the number displays on two lines; 16 digits on the first line of the 
line of the display and the remaining digits on the second line.  
Keys available for editing/adding contact 
members include:
Back key - returns to...

Issue 1.0
7-8Handset Feature Settings
3.2 Settings
The settings menu items allows you to access and modify the DTZ-8R-1 settings.  
Use the up/down keys to select the setting options.  Once the settings menu is 
displayed, select the settings using the Select key.
3.2.1 List Settings
3.2.2 Menu Timeout Settings
Keys available for listing settings options 
include:
To select settings:
up (
▲) / down (▼) - accesses the next 
setting in the list (forward/backward).
Select key - displays the selected...

Issue 1.0
Owner’s Manual7-9
3.2.3 Brightness Settings
3.2.4 Power Save Settings
While in Standby or Talk mode, one minute elapses (without pressing any 
keys) and the phone enters Power Save mode.
To exit Power Save mode:
1. Press any key.
- OR - 
Remove the handset from the charger unit.  
Keys available for brightness settings 
include:
Default = MAX.
MAX = 100%
HIGH = 80%
MID = 60%
LOW = 20%
To select settings:
up (
▲) / down (▼) - accesses the next 
setting in the list (forward/backward).
Select key...

Issue 1.0
7-10Handset Feature Settings
3.2.5 Key Lock Settings
This menu item allows you to enable/disable the handset Key Lock function. 
To enable/disable the Key Lock function:
1. Use up/down arrow to access On (to enable) or Off (to disable).
2. Press Select. 
If the Key Lock function is enabled while the handset is in Standby mode, 
the keys are locked after 15 seconds elapse.  You can temporarily unlock 
the keys for handset operation.
To unlock the keys:
1. Press and hold  for two seconds....

Issue 1.0
Owner’s Manual7-11
3.3 Sounds
The sounds menu items allows you to access and modify the DTZ-8R-1 ring 
tones, out of range alerts, key tones and turn vibrate on and off.  
Use the up/down keys to select the menu items.  Once the settings menu is 
displayed, you can make the appropriate changes using the Select key.
3.3.1 Sounds List Settings
3.3.2 Sounds Ring Tone Settings
Keys available for listing sounds settings 
include:
To select settings:
up (
▲) / down (▼) - accesses the next 
setting in...

Issue 1.0
7-12Handset Feature Settings
3.3.3 Sounds Vibrate Settings
3.3.4 Sounds Out of Range Alert Settings
Keys available for listing vibrate settings 
include:
Default = On.
On = Vibrates when incoming calls are 
received
Off = The phone does not vibrate.
To select settings:
up (
▲) / down (▼) - accesses the next 
setting in the list (forward/backward).
Select key - selects the desired setting and 
stores the selection.  A confirmation tone is 
emitted.  The previous screen (setting list) is...

Issue 1.0
Owner’s Manual7-13
3.3.5 Sounds Key Tone Settings
Keys available for sounds settings include:
Default = On.
On = Key Tone function is enabled
Off = Key Tone function is disabled
To select settings:
up (
▲) / down (▼) - accesses the next 
setting in the list (forward/backward).
Select key - selects the desired setting and 
stores the selection.  A confirmation tone is 
emitted.  The previous screen (setting list) is 
displayed.  

Issue 1.0
7-14Handset Feature Settings
3.4 Language
The language menu items allows you to access and modify the DTZ-8R-1 
language settings.  There are three languages available; English, French and 
Spanish. 
Use the up/down keys to select the menu items.  Once the settings menu is 
displayed, you can make the appropriate changes using the Select key.
3.4.1 Language Settings
3.5 Administrator Settings
The settings menu items allows you to access and modify the DTZ-8R-1 
administrator settings.  These...

Issue 1.0
Owner’s Manual7-15
3.5.1 Administrator List Settings
3.5.2 Administrator Registration Settings
This setting allows the administrator to register the handset.  
To register the handset:
1. Press and hold the left key on base station until the blue LED blinks 
(three seconds).
2. Select Registration from the Administrator Settings menu list.
3. Press the Select key.  The LCD displays the Registration screen.
4. Enter the Registration Pin number.
5. Press OK to send the pin number to the base...

Issue 1.0
7-16Handset Feature Settings
.
Handset searches for the base station:
Keys available when registering the handset 
include:
Cancel key - exits registration mode.  
Enter Registration Pin:
Keys available when registering the handset 
include:
Default = 1234.
Delete key - deletes one digit.
Dial (0~9) key - numeric keys to used to 
enter the pin code.  
OK key - sends the registration pin to the 
base station.